Any interest in a single RL-i8?

[Any interest in a single RL-i8?]

Let me know how much, I'd be very interested!!!!!!!

[help me choose]

In the right ported box with 1200, that 1508 would be awsome!!!!! I had 4 of them with the C/F cone running off a AQ2200. That was no where near enough power for them, but they sounded great. I had them in 1.2. Cubes ported to 36Hz. Right now you can find them for about $120-$150 shipped used.

[help me choose]

Ya the 187 would be nice too. I brought the 1508, only cause to can add so much more power to it later on if you wanted too, LOL.

[help me choose]

How about a DD 1508 ported. That 300-480 will just be tickling it, but ported it could sound real nice. Good for for the kick drums, and good for output with bass. It would fit well behind the seat.

[Lethal Injection 12" + AQ1200D]

Lots of things to consider, maybe get a D4 and run it at 2 ohms which will give you the power you need, then if you decide later you can buy another LI 12 D4 and run the pair at 1 ohm....Sounds like a winner to me...

Yup that's the route I'm going with. Thx for the input guys.

[Lethal Injection 12" + AQ1200D]

I don't know if its just me... But seems to me everyone lately that has a question about an amp/sub combo wants to over power the balls out of the thing..

At least the question is being asked rather than people just going out and blowing a bunch of nice subs.

You want to run about double their rated power. I think a death row would be a better option.

It might be a better option, but money is key. $450 is the budget. $189 for the LI 12" & $250 for the AQ.

[Lethal Injection 12" + AQ1200D]

A D2 @ 1ohm

[Lethal Injection 12" + AQ1200D]

I just wanted to know if the Lethal Injection 12" would be ok to handle an AQ1200D daily ported?

[Which would you choose?]

It's Mach5, pick one LOL. It's hard to make a bad choice.

[Which would you choose?]

How could you not want that ?

LOL those are my old 18"s. :bigclap: Out of those that you posted, I would go with the RL-p. You could also consider the Mach 5 18".

Lol what are the chances.... I'm sure they sounded really clean?

They sounded awesome. I had them ported (30Hz) in a wall with about 1200w to each. They LOVE to get low. If it wasn't that I hated having a wall I wouldve held on to them. I ran 1 18" for a while and put up some good numbers with it tuned to 35Hz.

[Which would you choose?]

How could you not want that ?

LOL those are my old 18"s. :bigclap: Out of those that you posted, I would go with the RL-p. You could also consider the Mach 5 18".

[Which Cap]

Which one of these caps is the better buy or the better name-brand? Is it the LQ30CAP Lanzar 3.0-Farad cap or is it the ALMANI ALF2F

2-Farad Digital Power CAPACITOR. They are both around the same price?

[New BTL Box]

It won't make much sound free air! Put it in the enclosure!

I don't think it's free air. He's just running it inverted possibly.

Umm I was being a smartass...Telling him to quit taking pictures and put it in.

[New BTL Box]

It won't make much sound free air! Put it in the enclosure!

I don't think it's free air. He's just running it inverted possibly.

[New BTL Box]

Good job.

[Might let go of a pair of RL-i8's]

aww there so cute!

depends on the price

+1.

[2.5 cubes net possible??]

Any info on doing something like that? I can build a "standard" ported enclosure, but i've never tried a bandpass/6th order before.

[2.5 cubes net possible??]

2 part question, lol.

1). I'll be getting an '05 Chevy crewcab next week sometime, and I was wondering if it's possible to get 2.5 cubes anywhere from behind/under the rear seat?

2). If not, I may consider a blow through. The problem is I dont want to cut a big hole. What effect on tuning would building a box like this?

Thx for any/all help you guys can give. :clap:

[MLI 6.5]

Awsome mids/subs. I have 4 (2 per door) running off of a small crappy amp right now, and they sound great. I can't wait till my 125.2 comes in.

[some videos from hawaii 18ssssssss]

Good stuff. What CD is that? I've been wanting to find it, but can't.

[any box builders?]

so can anyone help me out?..anyone?

If you don't mind the shipping I can build it

[any box builders?]

Do you have a jigsaw? You pretty much have all the dimensions there. It's not going to be cheap to ship a box.

[4 4" aero for 4 RL-i 10"s]

SoundSplinter

[4 4" aero for 4 RL-i 10"s]

Thinking of going with 4 SS 10"s with my Sundown3000. I'm thinking of using 4 4" aero's with them. This is going to be my daily tuned to about 34Hz.

[Any plans for a "SUPER WOOFER"???]

They don't make an RLS18. Maybe you ment the RLP18. I had 2 of those in a wall a few months ago. If the RL-I 8 was available, I would be ordering 6+ of them right now.