chad1208

Ok here is a serious question and I would love everyone who veiws opinion. There are three sets of 6.5'' components, you can only choose 1. Alpine SPX-17PRO (Type X) Kicker 04SS65.2 Kicker 10QS65.2 Here is my issue, yeah i actually ordered all three, its a long story but end result is i own all 3 sets. just need to know wich i should use. I actually have a set of the older Type -X in the truck now, and they are amazing. But I have heard alot of good about all three. Here is what I am looking for. I want Loud Crisp mids and highs...i mean LOUD, but with out distortion. Just let me know!

Ok, I have a 2005 Colorado Extreme, it is a standard cab truck. I am uncertian on the size of the box that is currently in it, but I was wondering if there is enough space there to run a ported box housing 2 10" kicker L7's and do it neatly? Right now the box I have has the Amp Flush mounted in the box behind the driver seat, and the 2 10" L5's behind the passanger seat. Sounds good as it, but looking to be a little louder! Here is a link to the truck as it is now. I posted them on Kicker's web page for this very reason. KICKER Hooked Up If this can be done....can the box be wrapped in glass, and painted eventually? Thanks, Chad

Thanks!

Ok i will def check them out...and thanks for the info thus far!

I am sorry I was typing way to fast...the original box actually houses two not (to) 10'' L5's and the ZX700.5. So all i did was buy a amp physically the same size as the old one to fit in the box. So i put two L7's to replace the two L5's and the 1500.1 to replace the 700.5. Make better sence now? Oh and according to Kicker, the L5 and the L7 both have the same mounting depth and air space requirement for small sealed enclosures. I would love to look into a ported design, problem is....Yeah its a standard cab truck and not really looking to do a blow through set up. If you have any info on someone that has the knowledge on building such a box with that little amount of room...shoot it to me and i will def hit them up..

I am sorry I was typing way to fast...the original box actually houses two not (to) 10'' L5's and the ZX700.5. So all i did was buy a amp physically the same size as the old one to fit in the box. So i put two L7's to replace the two L5's and the 1500.1 to replace the 700.5. Make better sence now? Oh and according to Kicker, the L5 and the L7 both have the same mounting depth and air space requirement for small sealed enclosures.

I am sorry I was typing way to fast...the original box actually houses two not (to) 10'' L5's and the ZX700.5. So all i did was buy a amp physically the same size as the old one to fit in the box. So i put two L7's to replace the two L5's and the 1500.1 to replace the 700.5. Make better sence now?

Ok, New to the site do hello everyone. I am currently deployed and have a question. I have a standard cab Chevy Colorado, during my first deployment i had a kicker ZX700.5 installed and it ran my to kicker L5 10'' and my Alpine Type X components. Not sure how loud it was but i enjoyed them to the fullest for the past 4 years. Well i am deployed yet again and got bored, so i decided a up grade was needed. Here is my questions...how well of a up grade did i do? I now have 2 Kicker L7 10" in the same box, and a ZX1500.1. That was easy simply becouse the box had the old amp counter sunk in it..the 1500.1 was the same size. And i swaped the Type X components to the kicker QS65.2 and powering them with a ZX200.2. So the real questions are....is this going ot be a huge noticable diference or did i just waist a butt load of money compared to what i already have? Next question is, what can i potentialy hit DB wise with this set up? Any info will be greatly appreciated.