rmzsuzuki89

Wire First two runs back, 8 more to go. I've had my old power wire ran under like that for over a year now with no problems. No drilling through the firewall and stuffing it under carpet ftw.

Test fit for the buss bars on the back battery bank. I kinda just wanted to see how they looked back there too. They will be in a box with a cover when finished. Thanks to wgsj_fortvalley/PeachtreeCustomz for the front and back buss bars.

Voltmeter Gonna have to come up with something to cover this at night.

Crimping my old 1/0 for redoing my big 3. I love my new crimpers so much that I decided to hack saw a terminal in half to see how it looks (this one was actually not a very good one compared to my new ring terminals and after having some experience). Ended up hitting my thumb and slicing half way up my thumb nail lol...And sorry, the pic's crappy. But it looks like a solid chunk of copper that's fused together. Hydrolic crimpers ftw. Deka up front.

Gutting process. And my dad getting the golf cart ready for a sub lol. I'll be so happy to get that rats nest cleaned up. Bolting down to where the seats were bolted down to.

The gear

Also remember to keep the loudness feature off. From what I've heard it clips it pretty hard too. So no loudness or bass boost.

Have been planning this for a lil while now. Being busy with school and what not, it has been a long time coming. I finally started the other day though. Just a heads up: Being in college full time, with a ton of papers coming up soon, this will not be a fast build. Just gonna work on it when I can between class, gf, and other things until its done. What's going in: 4 DP21"s 4 SAZ-3000d's (new heat sinks) Maxx-Link 200+ ft. Tsunami Competition 1/0 (5+ 5- runs back) 9 Deka 9a31's (1 up front, 8 in back) 1 DC Power 270 amp alt (for now) 4th order designed by iamamp3pimp Other misc. things All in an '03 Expedition XLT Big thanks to Robin for the design. Since this will be my first big 4th (2nd ever), I'm glad he could help me out with it. Pics uploading.

Here are some pics of what the wall will/may look like. I'm still tweaking the inside a lil with 45*s and whatnot. May do the port bracing a little differently, I just don't know if that will be enough lol. I'll probably move that one down and do another one as well. The sides that look to be hollow will have 2x4's in them. It will be understood better when the box build starts. There are a couple reasons I decided to go this route instead of the 4th. I feel that I can make this a lot stronger since it gives me more room to work with bracing and such. Also, it was what I had originally wanted to do, but didn't have the room until I took the door panels off. It was also a lot of fun to design. I have been doing it little by little when I get sick of working on my last paper for school lol.

Thanks Is there a way to change the title of this thread? I might know a guy who knows a guy that heard about how to do it. Lol Could you tell this friend of a friend who heard about how to do it to maybe change it for me? And maybe change my first post for me, I can pm what it should read if needed. It would be greatly appreciated. I would like the title to be; 4 DP21 Wall Build Thanks

Thanks Is there a way to change the title of this thread?

Me too, I like it so far.

Here's kinda what I'm thinking. Still tweaking the inside and volume a lil, but here is a general idea.

Haven't been on here in a while, been really busy doing papers. But I was out working in the car and decided to take the door panels off to see how much more room it would give me. Well it gave me a ton more room. So I'm gonna change things up a lil. Gonna go with a flat wall ported in the center, show off the subs a lil lol. I'm putting the finishing touches on the design now. I'll probably start a new thread when I do it because the title would now make no sense, and there is a chance that it will be dead for a while because I still have one more big term paper due at the beginning of May.

It'll be quite heavy lol.

What do you mean?

I don't think there will be much restriction with that big of port lol. Google Sketch-Up

Here's a lil bit of the design.

The bundle under the car lol.

Got all the runs back done today, 10 total. Gonna do a piece of mdf somewhere in here to mount the fuse holders to.

Snakes in a car. LOL Nice build man. Haha thanks.

There's more coming lol. I guess it looks decent now, I'm gonna clean it up a lot when it's all in though. Alright...My phone stopped working completely, can't call or text in out out. I should be getting a new one between later today and Friday.

How it looks under the car.

Nice and neat haha.