reaper68

Make people a heck of a deal if they want the SQ and M series as a package

Liquidating my car audio stuff. These are all BNIB amps that have never seen power and I am tired of moving them around the house. All prices are OBO, buyer will pay actual shipping. If you want references for me let me know I can probably dig up guys that I used to sell to on multiple car audio forums. Also please feel free to check out my feedback on ebay at grimreaper68 M2000.1-700.00 OBO SQ4100-600.00 OBO MPA4150-400.00 OBO

2000.1-650.00 obo 4100-550.00 obo

Does anyone have T/S for the 18 flatlyne, I was hoping to see how well it would model up for IB use.

I see the store has 18" Flatlyne's what are the recommend enclosures?

Hello, this would be my first go with a sundown product and I wanted to see any users opinions on the idea. The sub woofers will be receiving power from a mmats 2000.1 so the subs in theory not accounting for freq. or box rise etc. would get 500 per. The enclosure will be sealed shooting for a little bit higher Q around .8 as I like the warmer sound. I'm not a huge fan of dampened or critically dampened sealed boxes. Basically I am at an impasse as it would seem with the current sale it would be stupid to miss out on the SA's as I could potentially up grade power later on these vs the SD. Any thoughts, I know basically no one has played with the SD's but opinions would be good.

hmm you say single 6 ohm 6 8's of 2000 rms hmmm

Another question what is the thru hole Ø? Will 1/4-20's work or are we looking at #10's

Ok I have been beating my head against a wall trying to decide on which driver to run. My initial thought was to run a pair IDMAX 12's. However, I have some reservations on doing pretty much the same thing I have done time and again. So with that in mind I have been pursuing large displacement drivers. I need something that will work in a sealed enclosure, which the xcons seem to be fairly close with an EBP around the level that would work well in this setup. I will be powering this subwoofer with a mmats 2000.1 so it should see around its rms rating, granted box rise ect you won't see close to it, but that's ok. Alright so here are a couple of questions for you is this sub a very bottom heavy subwoofer or does it seem to reproduce the lower octaves without any odd peaks in out put, yes I could EQ it I just don't want a sub that will run out of steam at 60hz. My current setup works well with an 80hz cross over point so it would have to fill to there. Ok so could anyone compare its sound to any of these drivers original ppi pros, JL w1,w3,w4,w6v2, audiomobile evo-10, evo-r 15 (best sub for music I have owned), tc 2, 3hp, 4hp based drivers. I'm trying to find something like the evo-r which is why I was looking at soundsplinter so hard, but this seems like it maybe an acceptable alternative

Well I will hopefully will be getting one of these guys soon. I just hope the mmats is a good match to it. So just for quick reference what is the bolt circle size and mounting depth? I'm going to have shoe horn it in a little but it will be well worth it I think. Least wise its something different than a pair of 12's since I have been running those type of setups since 2002.

I see there is an msrp listed what can we expect for street price

That's always an interesting time, if I had the bank I'd just order all the sizes and do it for you

Do you have any design criteria? Prints available, or the happy joy or reverse engineering them?

What version of 3ds do you have? I could do the models if you have prints but I don't have 3ds loaded up so I would have to export the file in a compatible file type.

Alright kind of an odd question I know I have searched for it before, but could I get the mounting depth, bolt circle diameter, and if possibly a model of the driver. By this I mean does anyone have a print, surface, or parametric solid model of the driver? I can work with inventor, solidworks, autocad, Unigraphics NX, or pretty much any file type that can be translated into these programs(just exterior surfaces would be fine). Basically I am looking at developing a pretty complex enclosure to fit this into my vehicle and I would like to get started on it.

Thanks I have been going though trying to find all the posts sealed. It seems anymore all anyone runs is large ported setups. I honestly prefer the sealed sound on any application I have ran. this may be the direction I take.

I was wondering what was going to happen when tc sounds did it's thing. Hmm well I hope it works out

So will these be back in stock soon? just wondering I'm thinking about doing an install with 4 of them

So have these come back into stock yet I am looking to buy

I am looking at replacing my primary and adding a second batt to the GTO. Do you offer a reverse terminal Group 35 battery that would fit this car?

Do these guys model up a little weird or is it just me. I haven't modeled it in Bass box pro yet but WinISD is basically saying its going to be critically dampened with SS recommended box design? Just wondering why they didn't go with something like a Q of 7 sealed?

I'm going to do a blow threw in in a 1995 s10 with dual 300 amp alts and hopefully 4 of these subs with two of the new 2500 TI's and one of there larger 4 channels on what I haven't decided yet. I was thinking maybe Image dynamics Horns to keep up, maybe even UDS horns who knows. I just know the SS are like my old audiomobile EVO-r 15's, but improved and those were probably the best drivers I have used period off my LP 3.2hv

Now if I can get phoenix gold to get off there butts and release their new TI series amps I will be set

denim has the right idea. next vehicle will be with two LEVIATHAN's hmm maybe I could find some northcreek leviathan 18's in an aperiodic setup hmmm

I want two of the six channels. One for 3 JL tw5's and another for a morel front end