Newbie Sign IN

Hi I'm James but you can call me enj0i because that is what I used to skate with I found SSA from looking for the most expensive subwoofers out there I try to go to car audio shows and I have been to 4 this summer so far I run digital designs because they are the output kings My amps are Crescendo til I die Get that stock alternator out of here your shit aint loud! sorry. Anyways Hi and I hope none of my equipment blows up forcing me to make a thread for help

What's up, I'm new to the car audio scene and looking to learn a little bit and do some research before investing in a system. I'm focusing on my 96 Chevy Caprice... I want to add a little "Show" to compliment the "Go". Later, M-M

Hey guys. Long time lurker here. Just signed up for the first time, since I'm taking my car audio a bit more seriously now. I just want to express my appreciation for the amount of good info I've had readily available because of this site. Now it's my turn to contribute to the community. Looking forward to our time together!!! Stay slappin'!

Hey all! I'm glad to be apart of this forum! I am looking to get a new sub woofer. I had a 15" Kicker L5 that died on me. I am looking at the Fi Q but wanted a little advice first. I am looking for a good SQ sub and I ahve heard that the Fi Q is a good one. It will be powered by ZX750.1 which from what I read is a little underrated. The fact that it fried my L5 which is rated at 750w RMS also leads me to believe either the sub was over rated or the amp is under rated. The amp is hooked straight to the battery via a Rockford Fosgate 4 gauge kit. I currently have a cheap auto-zone battery but I will be upgrading to an Optima Yellow top soon. The vehicle is a Chevrolet Taho…

new guy from hercules ca (east bay area) drive a 04 g35 sedan. currently have 2 fi ssd 10's being powered by a audiopipe apsm-1300. in about a week and a half i am getting a second 1 though so i can push 1000 wrms to each sub instead of only 300 which it is currently at. they are in a 3 cuft ported box tuned to 33. looks like a pretty awesome forum so far just from searchin around. hopefully i can find a lot of useful info.

ive been studying your amps for the last few days. a guy at the nissanclub.com forums recommended me to sundown audio. seems like im in the right place for some pure power. i want to run to memphis mojo 12's with the 2000d mono amp on preorder right now. will it be sufficient for these? if so i will order it now. also i wanna do this right so what kind of wires should i use? what rca cables are the best and what gauge? also what subs do you recommend or compare to the memphis mojo?

Hey everyone, just wanted to introduce myself here. I'm moving over to this forum from CA.com cause I feel like that website is falling apart a little. But I recently put together my first system consisting of the stuff in my sig and I'm real happy with the results.

Hey guys its nice to be a part of this forum. Im currently saving up and building my new system. Right now I have two Kicker Comp 10's on about 484w RMS in a sealed down fire box thats about .75ft^3 per chamber. I will soon have an SSA Icon powered by an audioque 1200D in a 2.5ft^3 ported box tuned to 33htz. My two channel amp and infinity reference 6.5" components should be here soon to take care of the highs and midbass

Hey guys, new to car audio and I hope to learn some here. Hopefully my first purchase (although not for a couple years...) will be something from SSA.

Hey there! Wanted just to greet you all from Norway.

Stopping by to introduce myself... I live in central florida and love to customize my truck and anything to do with audio. Have fun out there everyone!

new to ssa not car audio some of you may have seen me on other forums, youtube, or shows in fl. whats up

Hey Guys I am new to your forum. Seems like I got alot of reading to do. I am currently doing a install in my 2000 F250. Useing a older Alpine MRV-F400 V12 for up front and a MB Quart monoblock for the sub. Also have a older Hifonics Zeus II that I am not sure how to incoroporate into the system yet...The head unit is still undecided as of yet too. Would like to go active and thats how I ended up here...Robert

Hi all. Another new guy here. Been lurking for a while and finally decided to introduce myself. I'm Dan from east central Kansas. I was into car audio in high school and for a few years after, but got out of it about 5 years ago. Somehow I came across ***** *****'s videos on Youtube and got bit by the bug once again. Looking to build a small system for a 2000 Dodge Dakota Ext. Cab since I've only got one payment left on it (yes!). Very intrigued by the non-mainstream brands that have come out since I've been out of the scene and I'm having a hell of a time deciding what to get. That's about it. I'm a pretty boring person. Dan

Hi all! Thanks for having me! My name is Brandon and I drive a '94 F-150 I've always been into car audio but its always been major brands like Kicker and Alpine. I finally decided to get some SA-8s. I got a good deal on a new set on V1s. I have 2 Sa-8 V1s. The box I am using is a Ground Shaker SPQ28 http://www.sonicelectronix.com/item_62689_Ground-Shaker-SQP-2-8.html. My amplifier is a Hifonics HFI1500 @ 2 ohm. They are brand new and have about 3-5 hours of play time on them. On some songs there is what sounds like a mechanical sound. Like its slapping inside of itself. Also the dust cap gets a pretty warm. I want to eventually rewire them down to 1 ohm but i want to ma…

Names Peyton,just dropping in and checking out SSA,I usually stick around on gmfullsize.com,customgm.com,and performacetrucks.net Pioneer 5200bt All knukoncepts wire and rcas 6 st-200s (waiting to go in) 4 6.5 SA (neos waiting to go) Sundown sax 100.4 On the hunt for saz 1500D, Eventually looking to do a larger build but low rms that will still do decent numbers Using the 1500 on either 4 dcons or 4 E15s I have the entire interior of my truck out right now for paint,and this is why my new goodies arent in yet.I have around 80+ hours of sanding and almost dont Anyways here a few of the truck Static 6/9.5 on 24in billets ,bagging as soon as the truck gets back from STC I ha…

Hello everyone, I just wanted to say hi and I'm glad to be a part of the community. I am from Louisville, KY. Are there many people from my area on the site? I came to this site because I am looking for a set of 12"s. Digital Designs 9512s Cascade Omegas Audio Pulse Axis FI BTLs I would also be interested in any other subs that you all think would handle between 2000 - 2500rms a piece. They need to be either D1s or D4s so I can wire them to 1 ohm to run off my Z1A. Thanks for taking the time to read my post and I look forward to meeting everyone!

Sup guys im very active on the other forums thought id try this one out and see what kinda new subs i can find.

hello all

ok so i have been lurking for a lil while on here and decided to post up my setup to see what everyone thinks. i planning on adding another 2200w within the next few months Audio mods : 2 12in Fi BL's 2200w audioque audioque mids and highs 1200/4 infinity kappa big 3 upgrade (0 gauge) kinetik 1800 battery 0 gauge wire from battery to 2200 and ground 8g from 2200 to subs 6 cubic ft box tuned to about 33hz i sound deadened the entire car and removed the spare tire to make room for the box. this is my 07 Scion tC This image has been resized. Click this bar to view the full image. The original image is sized %1%2. This image has been resiz…

Hello all SSA members, william here .. eh you may call me Kyle. Im glad to have an account with this awesome forum and hope that i can learn from many of you!

I've been into car audio for a year and a half and i have alot of people fooled with what i do know for being into it for such a short period of time. for starters i drive a 2000 oldsmobile alero. for a deck i have a Pioneer Premier DEX-P1R, Some VR3's in the back deck... (you'll know why i went so cheap in a minute....). and a Memphis EQ50 in the dash. for the bass i have a 15" Pioneer Premier TS-W8102SPL in a crappy 2.75 cu.ft' box, (my 12th box but first 15") i redid the calculations and it's about 67 hz. lol. but regardless with the box falling apart and the car built the day before comp i hit a 139.1 at the dash (termpro) i've since built a new box thats 1.5" MDF …

Hey everyone... been into car stereos since i was about 17, am now 22, be 23 in april. worked at the circuit city roadshop when i was 18, learned how to do the basic installs and alarms. never got into custom stuff, but have done fairly large system installs in my day. I drive a 1996 Toyota Tacoma 2wd regular cab automatic, I have done everything myself, notched the frame, raised the gas tank, lowered, welded the roll pan, tailgate handle, antenna, hood squirters, put a 2004 front clip on(core support, everything), painted the truck myself also, it was my first time doing all of this. Ive had a handful of stereos in it back when i was younger, bought the truck with 2 mtx…

hows everyone doing, im new to the forum, had some guy at caraudio.com refer me to this site, and so far it looks like a 5/5 type of site i need to mingle on =)

I'm a 29 year old autobody guy who dabbles in car audio because, hey, i build cars for a living! Not into competing, and was out of the loop for a good chunk of time (i was very into audio back in my HS days) so i'm getting used to the inexpense of massive power, and plethora of drivers to choose from. Currently trying to finish up my system in my 2002 outback daily driver. Debating on sub, because i want to keep things limited in size, because i carry stuff in the back a lot. Also finishing up two classics that are mine, and thus i'm putting sound systems into, though one i intend to just sell, so it's not getting anything great, just the mistake of a purhcase RE USX…