Crescendo Audio

Hows it going. I'm looking to purchase the BC2000D to power my 2 12" GCONS @ 2 Ohms. What is the lead-time on this product? Thanks, SnapperKing

I ordered two FT1 4ohm tweeters and two PWX-8in mids 4ohm. Well the 8's that came are 8ohm.....Should I try and make this work or just send back for the 4 ohms? The amp is a Alpine PDX 4.150 and does rated at 4 or 2 ohms.

I just got my new 1600.2 and installed it running my door speakers and each channel is wired to 2 ohms i have 3 runs of 1/0 wire from knukonceptz 2 pos 1 neg and the big 3with dual batteries everything is grounded to the chassi but i am getting a lot of engine noise and the amp almost over heats at high volume after 5 min or less, the amp never sees less than 13.8v and i have the power and the rcas on separate sides any help or ideas would help out a lot thanks

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

Will the bass knob from an american bass ab150 work with my 1000c4?

Hey my BC2K just came in today and it looks great. I'm looking to install it tomorrow after work but I'm confused as to how to hook up the amp. I've never owned a mono amp that had more than 2 speaker terminals. I have one 2 ohm DVC sub right now rated at 600 watts and would like to wire it in series to 4 ohms to get the 700 watts of power @ 4 ohms. I undersant I have to wire the sub in series but I don't know which speaker terminals to use. Im also receiving another matching sub soon amd would like to know how to wire them both for the 1100 watts @ 2 ohms when. Please help me out these 4 speaker terminals have me stumped Also, does the bass knob control the gain or doe…

Are the Crescendo BC5500 RCA inputs Single Ended Grounded or Differential? PLus what would make an RCA Cable Melt and cause Amp to go into Protect weather the cable is connected or not?

Hi guys, I want to share with you my future setup and wanted to know if the stock electrical will be able to handle it: I am brand new at this car audio business I crescendo 3500D at 2 ohm -- 1900 W continuous power 1 FI BTL N2 12 running at 2 ohm 1 4 channel JBL 100 W rms each channel 4 jbl 6.5 1 Pioneer 9400 Box tuned to 32 Hz (got the cut sheets from BTL forums) I will be doing the Big 3 I have a 2004 Accord with stock alternator and yellow top optima Thanks guys

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

I recently purchased 4 Crescendo 6.5 UN speakers and 2 FT1's. I also bought the Skar 125.4 (not gonna wait all year for Crescendo amps). I got the crossovers for the tweets. I have no idea what kind of crossovers to get for the 6.5's or if I have to. I've never done a 4 channel set up so any help or tips would be awesome! Please dont make smart a$$ comments. I'm new, no help othet than YouTube and I would like to be able to do all of my own work.

has anyone bench all or any of the amps i have a bc200d and wanted to upgrade to a bc3500 which will help push 2 PA mofo's 124x wired to 1 ohm unknown after box rise. If the 2000d can or will be enough to push the subs then i will stay were i am at and just work on my voltage or go with the bc3500 and have it sit around for a bit until the voltage is fixed and battery and all that other good stuff. I am hearing that crescendo amps are under rated.

Hello Crecendo Audio community I am looking to upgrade my speakers in my 2011 NIssan Altima S... I have already purchased a Pioneer AVH-X5500BHS Dvd Head unit and will be installing it soon.. Im pretty sure this unit will have enough settings to configure the speakers properly.. I believe the car has 6 speakers because it is a "S Model". I have read a few different websights on the accual size of the speakers and I believe they are as follows... Front Dash are 3.5"... Front door are 6.5" and the Back Top of Trunk are 6x9's (however I have hurd theyr will acomidate a 6.5" as well) Alot has changed with car adudio in the last 10 years and I'm more a computer and home the…

.

I need experienced help ASAP Please!, 1- I would like to know how can i measure the total rms output of my amp using a multimeter and 2- How many volts could the BC3500 D amp do unloaded(with out the sub connected)? Thank you

I was looking into putting an order in through SSA for 4 PWX 6.5 and 2 Black FT1 tweeters. Does anyone know if these speakers are shipping out fairly fast?? For a while I heard they were on National Backorder and the website still shows that. But the shipping dates have passed. If I order these up what's the wait time on them?? Any info helps. Thanks a lot.

I sent my C1100.4 in on April 19th, RMA #JKC11041513. I called on May 1st, and was told that you guys had received it and that it was waiting to be benched. I called on May 8th, was told that they had benched it, and were having issues resolving the problem. I was also told that if they could not resolve the issue (channel separation) by the end of the week (I'm assuming that's Friday) that I would be sent a replacement. I called on May 14th, no answer, so I left a message. I called on May 21st, no answer, but I did not leave a message. I called on May 22nd, no answer, so I left another message. I also filled out a support ticket on May 22nd. I have not yet r…

I was told crescendo makes murdermat. does anyone know how effective this is? I'll be placing my order if convinced on it being good I am debating between this and another brand. I have some cheapass brand bow installed in my car licks balls. I don't want to be getting into something similar .. anyone have any reviews??

heres an awesome Vid Bryan over @ mosified shot @ SBN .....little harlem shake fun with the Crescendo Audio Expo

When are your amps going to be back in stock?

What ever happened to my tee shirt order?