Test 1, 2, 3...

common chamber dual 15 11 net cubic feet 175" of port tuned to 38 hertz It's in rough shape right now. It will take me a while to finish so i'll update it once or twice a week

This build log will hopefully provide enough information to those folks who are interested in the SPL-12 for high volume car audio use. The criteria consists of: - Mach 5 SPL-12 wired for 4 Ohm use - 3.8 cubic foot bass reflex enclosure tuned to 46Hz - 2001 Pontiac Bonneville - Crest CPX-3.0 PA amp providing 3000 watts power into 4 Ohms - CD source with all necessary test tones - TermLab ****************************************************** Here starts the frankenbox Frankenbox meet frankendriver Box inside trunk Details Box tuning turned out lower than expected as the impedance measurement shows below. The port tuning ended up being 40Hz and not my expected 46Hz. F…

So we sent the prototyes of the FL1 and FL2 to Robin at BHE to test for us a few months back and since were new here I decided to post the results here. I had also sent the FL2 down to Taylor Fade in Baton Rouge to test as well. So here are the results that they came up with. Robin from BHE results were: Both amps were set to no distortion using the SMD-DD-1, and they were done in a vehicle that we build using a pair of PSi Platform 1's (750rms subs) and they took it like champs! the FL2 starting .25 and rising to 1.02 ohms put out 3416 watts on 10.4V the FL1 starting .25 and rising to .76 ran an astonishing 2996 watts with the voltage dipping down to 11.3V Taylors re…

Hey everyone wanted to let you know the subs are almost here, and they are finished! They turned out great and below is the actual pictures. Last Chance to Preorder! D2 and D4 Available, once they arrive they will be sold only at MAP Preorder Pricing - $140 ea shipped in lower 48 Rated Power Handling : 600 Watts RMS Motor Depth : 85mm (~3.34") and a 12" 12 Spoke Frame (~3.25" Deep) = Total Depth ~6.6" Spider : Dual Layer High % Nomex Content Progressive Spider 50mm WW on a 2.5" Diameter Former. Spider on production model is relatively stiff. Available in.. : D2 and D4 Model's Enclosure Recommendations Ported : 1.75 CuFt Per Driver after displacement of sub. Tuned ~36h…

these amps look freakin sweetness: well, i got the info and stuff in so here are the prices and power ratings: GS-200.2 **130.00 shipped** Power 50x2@4, 100x2@2, 200x2@4 Dimensions: 2.7x11.4x7.9 Fuse: 20x1 GS-400.4 **165.00 shipped** Power: 50x4@4, 100x4@2, 200x2@4 Dimensions: 2.7x11.4x12.6 Fuse: 25x2 GS-1000D.2 (class d) **215.00 shipped** Power: 150x1@4, 300x1@2, 800x1@1 Dimensions: 2.7x11.4x12.6 Fuse: 20x3 MK-1500D (sub amp) **230.00 shipped** Power: 200x1@4, 450x1@2, 1000x1@1 Dimensions: 2.7x11.4x13.8 Fuse: 25x3 MK-800.1 (sub amp) **180.00 shipped** Power: 400x1@4 800x1@2 1000x1@4 Dimensions: 2.7x11.4x16.5 Fuse: 30x3 MK-400.2 **165.00 shipped** Power: 100x2…

For the people trying to bunp on a budget I will be offering new affordable enclosures. each will have the following features built from lightweight birch to save on shipping one pair of flushed terminal bolts baffle bracing to handle heavier drivers wrapped in charcoal or black trunk liner ALL ENCLOSURE WILL SHIP OUT WITHIN SEVEN (7) BUSINESS DAYS FROM PAYMENT. NO EXCEPTIONS. If I am backed up with orders I will put you on a waiting list and keep you informed when I am ready for your build. I do not collect funds untill I start your build. DUAL 10" 2.5 cubic feet tuned to 32 hertz with 35 square inches of port $145 plus shipping DUAL 12" 3.6 cubic feet tuned to 32 h…

I should have some information up tomorrow for the IXL-15.2.2. It will begin with a EB-based design with some real-life measurements. I will follow through in the coming days with some testing of the IXL in-car. Nearfield, frequency response, impedance and other info will follow. Best, Mark

I haven't had a system in my dd for a few years now. I drive nearly 1,000 miles a week so I am in need of something. I normally have a lot of junk I need for work so this install will save as much space as possible. Through out the build I will show step by step some of the techniques I learn over the years. Factoy interior, hopefully the end result will look like this as much as possible. spare tire location under false floor false floor removed farm6.static.flickr.com/5267/5666965605_2a85e9c267_m.jpg tire cover removed. tire will remain remember this is a daily driver. jack and such will go in side pockets by the tire well the sub the sub will go somewhere in…

Well Quentin, things aren't looking so good for squeezing that XCON 15 in my Malibu. I have measured and measured and it would appear that the opening to my trunk is too d**n small for 3.5 cube box ( I calculated 5.3 cubes external : 16.75 x 32 x 17 ported and tuned at roughly 30hz with external flare, double baffle and bracing is added). Inside the trunk there is plenty of room but they made the lid so narrow it appears I have no way to squeeze it in. Will it play in a small sealed box well enough or should I just port a 12. Remember that I am looking for them deep throaty notes to really shine (similiar to them old round solo-barics, just louder. Or is their a bette…

.75 cubic feet tuned to 40 hertz with appx 450 watts clamped

Hi Everyone, Its taken quite awhile to get this finished, but we are finally there. The IXL-18.4 is now ready for production and I am offering folks a decent introductory price for those of you who want it now. Here are the specs of the driver and a few shots: Fs = 15.4Hz Re = 3.2Ohm Qms = 4.87 Qes = 0.39 Qts = 0.36 Vas = 556L Sd = 1029.2cm BL = 15.1 Mms = 228g Cms = 0.37mm SPL = 89.2 Xmax = 22mm Pre-Order Information This is NOT your typical 'pre-order' process in that 100% paid-in-full funds are being requested. Instead, I am requesting a $20USD non refundable "commitment" deposit (per driver) from those of you who wish to get in on the ground level. In return, yo…

tech2332 is first on the list. We will begin the build process on Monday. He chose to go with a SSA Icon 10 ported tuned to 34 hertz. Here is some scketch-ups he supplied that we will work off of for the final design.

how much shipping fee for send us or free shipping for us ?? why u dont reply email what problem ?????] i am waiting

i was on youtube and saw this guy with 4 18" in a tahoe, ***** ***** i think his name is? i would like to buy the same type of sub woofer(one of course), there is alot of option on the btl . spl or daily, dual two or dual one ohm and some other things. does anyone know the exact type of btl he uses??? Thanks

11 cubes net tuned to 32 hertz.

I have been working on my new system ....it is not complete yet I still have to move the amps to their new location inverted on the ceiling above the rear seat area..new vinyl on the front and rear doors and the rear deck/back seat area still need to be done but this is what I got done so far this enclosure will take place of the common chamber when it is done....

In the next couple of months I will have a line of high performance subwoofers to debut. In anticipation of the new lines I am going to start working on a demo vehicle. But I need some help. Would you rather see a smaller system with say four 12's or 15's with major attention to detail on the installation. Something along the lines of a bagged mini with a blow through. Or a retarded loud spl type set-up. Maybe a astro van with 16 or 20 subs.

Just looking to get some ideas for a killer bass race system. The system will be going into a 2004 Chevrolet Trailblazer EXT. I really want to do something crazy. I'd really like to do 12 x 15's sealed - but not sure if i have the room (about 42"H x 42" W x 53"L - is about what i have to work with)....so if anyone has ideas of how to fit the 12 x 15's in there let me know.....other ideas are also welcome.....looking at Fi SSD's and Ascendant Arsenals if i'm going with a lot of subs.....also looking at 4 x 18" BL's or Ascendant Havocs. Let me know what you guys think, and if you have any other ideas - dont have a whole lot to spend either.

build pics coming in a few days

Well after waiting years and years for this new release of invision, i'm getting ancy to say the least, so i've installed the beta 5 release of the 3.0 software. Wow! Check out the new features over there and join up to SSA's other forum. http://www.caraudio-forum.com/

I am offering a deal to the select few with access to this area. Aaron, if this shouldnt be in here please delete, I do not want to visible to anyone else. I am offering items for below cost. These items are either refurbs or damaged box (items are in perfect working order, just packaging was damaged where we could not sell.) If I find out someone trys to abuse this it will NEVER happen again... Limit to 1 item unless I fell generious. Here is the list, my cost is the first number then the price you would pay+tax and shipping is next. http://rapidshare.de/files/10848670/653_products.xls.html

The inlays wont be attached untill it's routed and wrapped in carpet but it should give you an idea of what it'll look like