General Audio

Here is a couple of my favorite: A$AP Ferg - Shabba Remix ft. Shabba Ranks, Busta Rhymes & Migos http://www.youtube.com/watch?v=YGo9ep68ej8 3 Six Mafia "Late Night Tip" http://www.youtube.com/watch?v=cpk6FTbxvc4

Looking for some ideas.

Heres some of mine: Three 6 Mafia - Late night tip Three 6 Mafia - Hood Star T-Pain ft. Lil Wayne - Cant Believe It Trae - Movin So Slow Jermain Dupri ft. Fabulouse and Ne-Yo - Finer Things Lil John & Eastside Boys - Throw it up Webbie - Just Like Me Webbie - Thuggin Young Buck - Shorty wanna ride wit me Young Jeezy - Let Me Hit **** Young Jeezy - Ya Dig Young Buck - The Strip Club David Banner - Play T-Pain ft. Akon - Ur not the same USDA - White Girl The Dream - I Luv your girl Lil Rain - Adore You Money Green ft. Jim Jones - Holla At a G Pimp C ft. POP & Lil Keke - Knockin Doors down (Chopped & Screwed pounds) Kinfold Kia Shine ft. Young Dro - Checkin M…

Are you all still posting install pics? If so how do I change the size of my pics so that they are smaller in size. Most of the ones that I have are between 600 and 800kb.

I posted some pics there a month or so ago and don't seem to be able to do it again....is this section down or is it my browser or something else I'm doing wrong?

how many batteries would u recommend for a sundown 3500d saz pushing 2 15" xcon's and a 100.4 saz for mid's and highs?

Do power acoustic amps do rated power?

i feel like i should say something nice about this company. i blew 1 of there 55001d amps and they took it back no problems sent me a brand new one (just had to pay shipping both ways). so 2 days ago i ended up blowing one of there 1600/4 amps. just called tech support to make sure what the alternating power/protect light ment. (it means its "toast"). the tech support was amazingly friendly and directed me to RA where they gave me a RA # no problem or saying that it was installer error. (which it was not). if it was not for their korean made cheapness i would HIGHLY recommend them. needless to say i'm still going to end up getting all sundown amps.

Not sure how true it is, or how reliable the source is, but I heard that Power Bass and Memphis are made by the same company. Anyone know if there is any truth to this? Looking at them there are a lot of similarities...but somtimes that doesn't really mean anything.

like I said to SS, I might be there, but I was wondering if there is a show vehicle for powerbass

Can anyone direct me to a power converter that goes from 110v to 12vdc?

Hi guys, so I connected a 12" kicker cvr to my hifonics 1000.1D on the bridged terminals on the amp but at the same time I connected a Rockford p3 8" on the two remaining terminals on the amp. I noticed that my kicker isn't hitting as hard. I'm curious to know if the connected could possibly causing me to have a loss of power?

I am running all Zed Amps in my system, Gladius to the comps and 2 miniliths to the (2) 12" subs. Recently I have had some problems with the minilith amps, but a return trip to Zed should have cured that. My question is my subs "say" they have an RMS of 675 watts and are capable of 2000 watts (Eclipse SW8200's) with the 2 minilith's I was assuming that it would be enough power to push these baby's. A brief conversation with Stephen and he recommends setting up the miniliths so that each sub is powered off of it's own minilith. Thus giving each sub "330 watts" in his words. that is less than half of the RMS. I wanted to strap the amps to get around +/- 1200 watts which wo…

if i'm planning on putting an aq2200d to a fi btl 12 daily 2ohm wired to a 1ohm load and ive done the big three and planning on adding 2nd battery in trunk the box is 2.5ft3 tuned to 35 would i be safe with my stock alt its 110amps at idle and 160 @2000rpm?

Simple question i can't find the answer to. So, if i have an amp that does 100w per channel, does the 100 get split between tweet, and mid? will the mid and tweet both get 100w or would the 100w be split between them?

So I want to do the "Big 3" and I'm also about to re-run my amps power/ground because i'm upgrading amps and was looking for good cheap wire. I went to home depot and they have wire there that is much cheaper but I want to make sure it still works just as good? I saw they had 4awg and 1/0 and many others and they said they were copper wire. I just didn't know if it will do just as good. At my local audio shop its like $2 a ft for 4awg and $4 per ft of 1/0 but home depot is $0.85 per ft 4awg and $1.85 per ft of 1/0. It was just on their electrical aisle with all the random wires by the foot and crimps and all that good stuff. I was wondering because I saw people on here…

i think i have seen people on the internet use power wire in place of speaker wire. is that possible or is that y they sell "speaker wire"

okayyy soo this weekend i finally installed part of the system on the new blazer and where i ran my power wire through the firewall gets reaaaally close to the right manifold and it emits a looot of heat. i put some split wire loom but its melting slowly hahaha i need something stronger. what do u guys suggest?

First post,anyway I bought 4 Powerbase pb1554's and I was wondering if anyone had t/s parameters and ported enclosure recommendations. I looked on powerbass website but didn't find all t/s or ported rec. Thanks in advance.

Hi, I recently purchased a pair of supertweets and pro mids both of wich are powerbass. I have been looking for an active crossover tk install them but am not sure what to get. I think they are supposed to be crossed at 5 thousand htz and above. This is my firt set of supertweets I have ever installed so kind if scared i will mess them up.not wanting to spend more than $200 but not limited to that much .Sorry if posted in wrong place.

Good afternoon all. I want to take a minute and let everyone know that I will be assisting you with Powerbass questions/problems. By now most of you are aware of the changes with Johnny no longer being with us, My name is Ron and I am the Eastern Regional Manager. I am also a former 12volt/ fabrication specialist. It might take me a few days to get back to some of you but this is only due to my extremely busy schedule. I am glad to be a part of the forum and look forward to hearing from you. Thanks, Ron@ Powerbass

I don't know the full story on Memphis. But I'm very, very curious as to how PowerBass stacks up to them now, and how they will stack up in the future. Memphis seems to me to be a bread-and-butter brand that many small independent shops can push without any concern that the stuff will pop up on the internet or in a big-box store. We've been selling PowerBass (AutoSound and Xtreme) for about 2 years now. We've worked really hard to emphasize the value and performance of their subs, coaxials, components, and now autosound amplifiers vs. other brands. I've told customers of the PowerBass Xtreme competitors and their history of building equipment for other brands such as M…

im looking for an amplifier to power my btl as much as it can i found a stetsom 2k6d for 350 but i dont know much about stetsom can someone tell me some info about the stetsom 2k6d?

i just got a return email from power master and said they can only do a 300 alt for me if its a pure spl truck since its a daily driver they the biggest they can make is 200amp for $639 ea said they can make me a 300amp alt for $500 now i know thats a 100 more amps for $139 cheaper..but i also know its not all numbers in this hobby..is powermaster that much better that i can go with less amps and pay more or should i go with EA?

welp today i am shopping for a secondary batteryfor the Celica build i am doing, and wanted to go with a HC1200 but stumbled upon powermaster d1200. Are these compareable? http://cgi.ebay.com/ebaymotors/Power...spagenameZWD1V would like to pick up the powermaster over the Kinetik if this is the case any help would be appreciated as im not familiar with the powermaster lineup and have always just purchased kinetik. It4s time to try something new though and if this should work comparatively then id love to give it a whirl just looking for a delieable secondary unit for the rear of the vehicle off a sundown 1500d and 100.4