General Audio
An Open Forum Dedicated To all audio questions that do not fall under the other specific categories.
3,954 topics in this forum
-
I read some of the former posts and it said that it's bad to use the bass boost on the amp. So is it best to leave the bass boost off on the amp but ok to turn up the bass on the beck instead? I set my amp myself today, I'm pretty good with doing it by ear. These audio shops around here are either shady or stupid. One of the turned the bass boost up on my amp alot and turned the gain down lol. It didn't sound right to me, so I went to another place and he said it was bad to use the bass boost on the amp and re-adjusted it for me. I thought he was trustworthy until I was banging my system and my Icon 15 smelt funny, so I turned it off and felt the sub and it was pret…
-
0
Reputation Points
- 3 replies
- 611 views
-
-
These are what I am currently debating to put in a Dodge Charger SRT. It will be made into a show car, so the way it sounds is very important. but it is not meant mearly for competitions. All of them will be set up nicely with plexiglass and such, much like what can be seen magazines like Performance Sound and Auto.
-
0
Reputation Points
- 3 replies
- 687 views
-
-
I am doing an engine conversion, and the altenator on the engine is rated at 50 amps. I am looking into a 100-150 amp altenator, yellow or red top, and the big 3. I am running 1000wrms.
-
0
Reputation Points
- 3 replies
- 570 views
-
-
Does anyone know where I can find a HO Alt for a 03 Kia Spectra? Ive searched around with no luck.
-
0
Reputation Points
- 3 replies
- 1.3k views
-
-
ive given up trying to fit my 18btl into my 86 monte. i would either have to fire into the trunk(eww) or lose all of my trunk. so im thinking about switching to 2 ssd 15's which will let me keep about 8 cubes of trunk space. the ssd's should be better for sq but still get down and play hard. i was going to feed the fair a clean 2000 watts at 1 ohm. should i get them loaded or just leave them stock. if i get them loaded can they take more power. (daily)
-
0
Reputation Points
- 3 replies
- 660 views
-
-
need the cutout diameter for a 18" 6-spoke venezuela basket also the overall diameter
-
0
Reputation Points
- 3 replies
- 706 views
-
-
Sup all. Random question that i should know the answer to but whatever lol. Is having a high amount of watts with your sub and amp always a good thing or if your going for something purely strong and heavy? or if you want quality will you find it with something that has less watts? and if neither then im officially confused lol.
-
0
Reputation Points
- 3 replies
- 614 views
-
-
So i looked every where and made this my last option, a friend of mine is selling a phase linear uv8 flip out head unit for 150, i was looking into a new headunit so iw as thinkking about purchasing it, does anyone know what volt it is
-
0
Reputation Points
- 3 replies
- 611 views
-
-
Well, my bro came home tonight and his car was broken into at school. they tore the lock out of his door, damaging the paint job he just spent $3K on, and all they got was a $100 Pioneer CD player. When will it end?! Never. Good thing is, there's an even better HU in it's place right now. How you like that Bi*ches! Can't keep a man from his tunes.
-
0
Reputation Points
- 3 replies
- 1k views
- 1 follower
-
-
I just got a 05 explorer and i want to put a new system in it. I have a good budget but nothing to crazy. I have 2 Re Audio SX 12in Subs that are going in there and My Kenwood head unit. Besides that i sold everything. I am willing to sell my JL amps ( 2- 500/1 and a 300/4). I would like about 750rms going to each sub. I liked my cdt audio components i used to have but i don't know which ones would be best for the money or to get a different brand... i am open to all ideas. I was wanting to put 2 sets of 6.5's and a extra set of 5.25 or 4.5's in the front ,but its just an thought. What do you think????
-
0
Reputation Points
- 3 replies
- 824 views
-
-
Before I get into too much detail I need to go over some information about the gear I'm working with. I currently have a 2.7cu ft box with a 15" sub in it that takes up most of my trunk. I have just enough space to fit my Cadence TXA-1000D amp in front of it. I also have a Pioneer GM-6300F 4ch amp. http://www.pioneerelectronics.com/PUSA/Pro...Series/GM-6300F So my sub and mono amp are going in the trunk, and I'm trying to determine placement of my amp and consequent amp install gear, both of which are variables that depend upon each other for optimal results. So I purchased this http://www.tsunamionline.com/product.php?id=532 a couple of months ago. (view page source to g…
-
0
Reputation Points
- 3 replies
- 892 views
-
-
Hi everyone I am looking for some suggestions on a good 3 stage battery charger to charge my 4 deka group 24 AGM batteries that is good for both agm & standard flooded batteries my budget is around $100.00. Desulphation a feature I would like to have. Some of the chargers I have been looking at are the Deltran Battery tender plus , Battery minder 2012 agm, NOCO Genius 7200. Those are just a few in my price range I am not looking for the best charger but one that will be safe for my agm batteries that will maintain, fully charge & keep them in top condition. I would greatly appreciate some suggestions & insight from you guys. …
-
0
Reputation Points
- 3 replies
- 1.4k views
-
-
My pictures will only upload as thumbnails.... I've got a few that uploaded in the past but I can't seem to get them to upload correctly any more. Any ideas on what I'm doing wrong? I've got some pictures of my Fi BL 12 and enclosure that I recently got put together that I'd like to show the masses!
-
0
Reputation Points
- 3 replies
- 1k views
-
-
i have a 2005 honda civic i need a bigger alternator im looking for a 150 amp or more anyone no were i can get one
-
0
Reputation Points
- 3 replies
- 985 views
-
-
It was between posting on here or in home audio but i just decided to post here.... my older brother has a Sony WM500 subwoofer that he bought a couple years back and does not use it so I decided to start a fun, little, "screw around" project. I have already taken the powered amp off the original enclosure and disconnected all the wires. Also I have taken out the actual subwoofer and taken out the power on button from the sub and I am planning on building a box for this sub. First off here is the subwoofer w/ powered amp: http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=11027875 Ok, so the box …
-
0
Reputation Points
- 3 replies
- 542 views
-
-
i actualy live 30 mins west of Toronto in Milton, and i was wondering if anyone near here has an SPL meeter...i wanna see were i stand before the comp on may 11...ive never been meetered before. thanks guys
-
0
Reputation Points
- 3 replies
- 567 views
-
-
ok so i traded my friend the orions, i got from nccj, for these pioneer subs i got from bb a while back(basiclly i sold him those too and got them back) and he gave me 50bux(in change ) but anyway, i have my PA 3000db, calculated a lil bit, and came up wt these numbers ohms watts gain 8 200 4 1100 900 2 1800 700 1 2300 500 0.5 2550 250 Now the subs are rated at 150rms per sub, so 300total. So i have them in series and thier both 4ohms so it should be 8ohms total. I'm scared to turn them up loud because i dont want to blow them cuz im gonna giv them to my g/f once my subs come in. The gain is set to 0, and all bass is set to 0 and -7on the HU, lol, I can hear it …
-
0
Reputation Points
- 3 replies
- 622 views
-
-
I'll be there with three vehicles. Who all's going and where are you coming from?
-
0
Reputation Points
- 3 replies
- 652 views
-
-
I was refered to the board from the mwsr msg. board hope some one can help me out heres the deal puttin the touch screen in the lincoln, got the parking break wire grounded and the vidio is working fine...BUT i aint gettin any sound when the car is started, but I do when it is on acc. keep following me though.... there is a red (it is hot) wire that was grounded to the back of the fac. radio and if I ground and then release this wire while the car is on I get my sound back..... aint never mesed with somthin like this....DO I NEED TO GROUND THIS WIRE?? IF SO WHERE...TO THE BACK OF MY DVD PLAYER...TO THE FRAME??? IM LOST ANY INFO WOULD BE GREAT...ALSO ANY BODY KNOW WHERE I…
-
0
Reputation Points
- 3 replies
- 572 views
-
-
OK this is what I have, 1-12" single 4ohm PG Xmax sub PWR 400 wavelength amp-600wrms @ 4ohms and clarion x-over pioneer deck box is 2.5cuft tuned to 30hz, with-in specs of what PG suggests. gains are set correct. This is what happens, I play a song like, Late night tip or some lil john, songs that I think hit pretty low, and SHIP does it get loud and low, but as soon as I put on anything that has hard bass, it doesn't get near as loud I mean nothing, nothing short of cranking it and adding bass boost will help, but this isn't what I want to have to do. This is in a 90 acura TRUNK not hatchback, sub facing back of trunk and the port is on the same side as the sub. my t…
-
0
Reputation Points
- 3 replies
- 769 views
-
-
Hi guyz, Would like to know other websites such as www.audiojunkies.com or www.enjoythemusic.com/news/ to keep up with the news. I am more interested in car audio news. I also what to know more about overseas news such as other car audio companies (Brax, Ground Zero, HSS Fidelity, etc...), not many might know that Helix (Brax sistership company) have new amplifiers (hybrid tube and SPL), subwoofers (thin line and SPL), and speakers.
-
0
Reputation Points
- 3 replies
- 1.1k views
-
-
so im back, still trying to understand this whole audio thing lol. havnt had much time to look into it but i had an ohm question i thought i might be able to get a easy to understand answer of... basicly from what ive been reading and such, unless im mistaken which is why im asking here, a 1 ohm amp goes to a 2 ohm sub and a 2 ohm amp will go to a 4 ohm sub? and is there some sort of converter that allows you to go 1 ohm to converter to a 4 ohm sub? or have i just confused everyone and should keep reading lol?
-
0
Reputation Points
- 3 replies
- 585 views
-
-
How do I remove the door panels from a 2001 Toyota Corrola? I would like someone who has done it a few times to help me with this. I have to install a friends new speakers into her car tomorrow and want to know exactly how to remove them.
-
0
Reputation Points
- 3 replies
- 614 views
-
-
I just got the ARC-AUDIO 2500 CXL & looking for some info on it? Any one know the good & bad with these amps? For years I have used a SoundStream 10.2 & have been very happy with it. Should I swap it & run the ARC?
-
1
Reputation Points
- 3 replies
- 666 views
-
-
Ive emailed them twice, and still no response, does anyone know when they will become available again??
-
0
Reputation Points
- 3 replies
- 925 views
-