General Audio

Hi there, curious about connecting a mono amp / 2x10" subwoofer setup. My subwoofer setup is pretty cheap, I know, but I just wanna make sure I do it right. The subs are Pioneer TS-W251R 10" 4 Ohm: Output Power (4 Ohm, <=1% THD) 60 Watts x 2 Output Power (4 Ohm Bridged, <=1% THD) 150 Watts x 1 Output Power (2 Ohm, <=1% THD) 75 Watts x 2 The amp is Infinity Reference 1300a: 200 watts RMS x 1 at 4 ohms (300 watts RMS at 2 ohms) So obviously, I have two pairs of subwoofer terminals in the back of my enclosure, and I have two pairs of terminals on the amp itself. Should I just plug subwoofer 1 into speaker terminal 1 on the amp, and subwoofer 2 into terminal 2 on the…

Is there a big difference between going with slot port or an aeroport?

My Fi BL came today already, it tooke way less than a wek and a half, i live in iowa btw. 44 lbs though lmao.

im a noob when it comes to stuff like this but heres my question i got 2 l7 12s dual 2 0hm when i put them together what load would they make

When is it, where is it, and how much is to get in.

i live in Phoenix Az and i am gonna start ordering my equipment but all we have is little shitty shops out here who never heard of ssa or sundown does anyone know of any installers out this way?Even a little travling distance from me ...

For meh trunkkkk Its average size, I wanna do 1 layer 50sqft, 100sqft?

Anybody ever deal with taking the dash out on one of these? I'm trying to install my single din radio (not sure if single din's possible) and i'm afraid to just rip off the dash like I used to do with my 2001.

I got these a few days ago to replace a set of Infinity Reference components and they sound pretty dang good. Big Big Big improvement. The only problem I have is the output is way down compared to the 2 ohm rated Infinity, which ain't a bad thing because they were very harsh to my ears, but the Bostons are having a hard time keeping up with my sub bass with only 60 watts on them. I am sure they would love some more power and probably wake up and really shine. Details........ The Bostons are rated @ 3ohm and 125w rms and I have a Rockford Forgate 450.4 amp that puts out 60w RMS x 4 @ 2 ohm, 100w x 4 @ 2ohm, and 225w x 2 bridged @ 4ohm. I had thought about just bridging the…

this is wild, not you see drills with amazing life and small light weight lithium batteries, im sure you have asked your self why not in the car audio world..... well wonder no longer,. no info on the XS power site but i found this on ebay http://www.ebay.com/itm/XS-Power-LR48-XS-Power-Lithium-Battery-/200674536062?pt=Motors_Car_Truck_Parts_Accessories&hash=item2eb9226a7e&vxp=mtr hell of a price and no info but wowzers. nice start in 10 years maybe the price will go down enough for me to have a few!

Sup all. Random question that i should know the answer to but whatever lol. Is having a high amount of watts with your sub and amp always a good thing or if your going for something purely strong and heavy? or if you want quality will you find it with something that has less watts? and if neither then im officially confused lol.

Does anyone know if the liquid sound deadeners that you roll on work as good as the mats.

Does anybody know how big a box should be for 2 18" Fi Bl's ?? Can someone please tell me some dimensions or measurements Thanks guys!

Rite now I'm in the middle of the install of my Clarus 61-2 component set. I have a pre-existing hole from the other tweeter, which is where the C1 will be flush mounted. Since the C1 doesn't have the "screw on" flush mount option like the type-r had I have to some how secure the tweeter. Scott recommended me hot gluing but it was difficult because it dried too fast and it basically cracked and peeled apart, (plastic on plastic) (maybe i used the wrong hot glue?) I also tried using Epoxy Putty but it didn't work well either. Any recommendations and ideas would be greatly appreciated! Thanks, -Mike

So i have tried searching and couldn't find anything specific about what kind of bolts to use for bolt terminals and how to install them. I usually run the wire right threw my box but i want to try some terminals this time. I tried looking for copper because copper is a good conductor but i could not find any. So what is the next best kind of bolts to use? How do you screw them on? I was thinking about putting some t nuts in the box on the inside and screwing my ring terminals into those then attaching the wire on the outside with bolts. any input would be greatful.

Hey i made my box for my truck its 2.5 cu. ft per chamber and its for 2 fi q's. Im not sure exactly how to measure out how long or wide my ports need to be. Any help is greatly appreciated

Hey guys, Heres my problem: My system isn't loud enough for me anymore. What I have: -12" Soundsplinter rlp -Planet Audio amp [does 650 into 2ohms(which is what I'm running my sub at)] -2.6 @ 34hrz box I think its a combination of my mildly weak amp, and not quite the right size box thats throwing me off, but then again, I could be wrong. What I'm considering doing is selling my RL-P 12" and the amp with the box for as much as I can, and with it purchasing a 15" sub (most likely another rl-p) and a 1400w amp and then building a new box. I'm also considering buying another 12", buying that same 1400w amp, and running 2 12"s. If I'm thrifty and get some good deals, I'm sure…

new driver and enclosure

Anyone on here extremely advanced in photoshop that can help me out making a graphic?! Thanks!

hi all went up to a local truck shop the other day and found a demo for a truck liner which consisted of a few pamphlets and a coke can covered in bed liner, well a friend of mine and i started playing with this can and soon enough we were breaking a sweat trying to crush it. then later that night i was watching my truck as the fi q 18 i had in the bed played and i saw how much everything was flexing so i was wondering if i coated the inside of my truck with the bed liner if it would save me from running into a problem like iamanmp3pimp (sorry if i butchered the Sn )had with his roof flexing till it cracked. thanks

What is a normal tuning hertz? Im not sure what i should tune my box for? any suggestions for 1 12" sub.

I saw lots of songs on a list here but I noticed that there were no songs from the Southern hemisphere. I know of many songs like Reggeaton that have awesome rythm and bass. I uploaded one to one of my websites. Take a peek and let me know what you think. Listen until the bass kicks in. Thanks. music

http://www.youtube.com/watch?v=oHYYkgSYeu0 I love it.... Had me cracking up for a couple minutes.... Now someone make one with the SSA Icon in it LOL

I'm Trying Too Figure Out If I Wanna Do 6 12's Or Four 15's In My Vehicle Which Is A Scion Xb With Seats Down Max Dimensions Are D 52 W 36 H 33. I Currently Have Two Hifonics BRZ 2400s Suggestions Will Be Greatly Appreciated. Goals Is Mainly A Daily Driver I Live In Cincinnati And I'm Not Too Sure Of Any Comps In The Area But I Plan On Competing In The Future And Will Look Into It. Electrical: Two Runs Of XS Power 0 Gauge Singer 275a Alt XP950 Upfront Two XP3000 In The Back

I have been thinking of different designs. Is there any issues with mounting a subwoofer in the inside port wall facing the port? I know the velocity from the port would be directed across the face of the sub, would this cause cancellation? Or would it depend on volume of the port? Any input is appreciated. Chad