General Audio

My top ten would be 1. Freezer - Gucci mane 2. My kitchen - Gucci mane 3. Waka flocka flame(uh huh) - Dj Spinatik 4. Alaska in the summer/All the hoes like me - Gorilla zoe 5. Light show- Gucci mane 6. Throw it up - lil jon 7. Air forces - Young jeezy 8. Knock It Out (Chopped & Screwed by DJ Rio) - Yung Joc 9.On top of the world - Gucci mane 10. Coca Coca - Gucci mane Yes i like a lot of gucci mane Every song in the 80 G'z album of gucci mane bumps like no other. There might be some songs that i never heard that pounds Oh Ill add a extra song for the heck of it Trap or Die - Young Jeezy

im getting 2 fi bl 15 and a dc 5 k amp would these be a good match for each other if not what would be a good amp for the fi's

ok well i hooked up my new rw and blew my amp after 2 days and i put a new amp on it and it has ground noise and i tryed another amp it still had ground noise i redid my ground new washer and such and looked at my power and remote wire and i still have the ground noise can you help me thank you

I am wiring up a 2011 mazda 3 wiring harness, and I have a wire harness that came with my Pioneer 3200bt and then I have the wire harness that is for my mazda 3, all of the colors matchup, except I am confused by a few things. 1. I have a ground with a metal "C" looking end on the 3200bt wire harness then on my mazda 3 wire harness I have a black wire on it as well that is ground too, what do I need to do with both grounds? I will be using a 12V relay if this helps at all, but still not sure how to hook both grounds up 2. On the 3200bt wire harness I have a wire that says "Reverse Gear Signal Input" but I don't have a purple wire on the mazda harness that goes to it, is t…

Will box a give me same results like box B ? Does it matter if sub is placed up, or on the side ?

Audioque HDC315 vs RD Alpha v2 15" D2 Which does they beat harder? just curious.. my amp is Hifonics Brutus BXi2008D Class D AMPLIFIER 2000 RMS! 1ohm 2,000 2ohm 1,300 can gain amp to 1500 on gain so curious about it..

I sold my Q's to a local guy with a S10 extended cab truck. He wanted to be able to see out of the back window and not wall it. There is very little room to work with but I managed to get 10.8cu after all displacement and bracing etc. Subs forward and port firing up, I have heard this is the way to go in these little S10's so hopefully it is loud and sounds good on music. This guy will be eating the steering wheel but this is what he wants, he is much smaller than me so I guess its not big deal My new shop tables, huge and I love them. The box is on the small side but hopefully it will be ok. Here is what I have done His truck is red so this subtle add of red in the…

I have a 15in fi q that I love but i want more bass. Im running 1500 rms and i dont want to change my amp just my subs. Im looking at the sundown sa 12. I would be getting a pair and making another custom ported box. Ya or Nay?

I've got a pal who I'd like to tell is wrong, but need some technical advice to confirm my intuition. I have a Mach5 MAW-12(350wts) I've built a 1 cube(plus sub space taken) sealed box for in 3/4 MDF, as per spec's and am running off an MTX Amp with 460wts max. My good friend purchased 1 15" JBL apparently capable 650 watts(don't know the model, but a new purchase), and running off an older PG 500 wt amp. He has built a temp box he's happy with, about 1.8cubes sealed, but made of 5/8" plywood. Although his lows seem to be lower, I don't think his volume nor his sound could be if he built a new MDF Box, instead of the plywood box he currently has. I don' think he's ge…

Ok, i hooked up a friends new amp, a 10001, to his q. it sounded really good for about a week then started making like a rattling noise and i cant figure out what it is. i have the settings on the amp to gain half and the crossover at 50. does anyone know why it might have a rattling noice. its not the box. im almost positive its the subwoofer.

hey whats up well its my first time on this forum. and umm i wanted to share someting so u can tell me wat you think... umm i been writing this info in this months and i migth give you a lil preview of the first 3 parts that i made and i will like to know your feedback. i wanted to do a full write up of all the things i know in car audio.. its not a big list since i dont know everything but hey at least i know something :-) well its been almost a month that i started doing this and umm i got some good info finished and i want you to see it.. plz dont start bein an @sshole if you have a problem with some i made pm or email me at [email protected]. thanks Hi, before …

What are some good rap songs to slow down for lower/better bass?

i am about to get some power wire for my big 3 upgrade and i was wondering wether it matters if i get a cheaper 0 guage wire or shell out and go for a brand name / more pricey wire thanks

You have front stage.What is the proper name for the sub portion?

I need an install kit for a '99 Explorer and the harnesses for power and speakers also? Can anyone hook me up. I'm finding little on the net, and the ones I have found, I'm not fond of. Thanks!

whens the last time anyones been on that site? I was on there about 3 days ago I think it was, and then all the sudden I could only go back in my browser to pages Id already seen. no new links would work for me. and now tonight I was gonna try and check some stuff out and again I cant get to the site. normally if a sites just down for maintenance they post something saying that as their home page while their doing their work, but I get nothing.

Anyone know where I can get the phil collins - in the air tonight bass enhanced version? google failed.

Any of you emm-effers coming down to Tucson for the USACi event on Feb 10? Meet up? Beer? Whatever? http://www.importfaceoff.net/tucson.htm

I have the Audiopipe pushing a ICON 12. Is that enough amp to push the sub. I have it hooked up right now and well it doesn't get much louder than my stock speakers.

I got done (for now) sound deadening my truck today, and when testing, I noticed there was still a bit of a rattle coming from some unknown location. I put my hand on a bunch of metal panels, sat on the box, nothing. Finally, I decided I would wait till daylight to really diagnose the problem. Later, I put a shirt over the port to see how much air was moving... The sound stopped. I removed the shirt, it started again. Did it a couple more times and the same thing happened... Am I missing something, or do I just need to dress up ( ) my box for it to want to work properly? I'm stumped.

I got a new incriminator 20.1 a month ago and just got a used one two days ago they look the same but the link cables are differnt on the new one it looks line a phone jack and the used one is RCA my question is how would I go about linking the two together

is a Sony xplode 1200w amp good for the Skar VVX 12's ( 600 rms/ea) or any ideas of a cheap but powerful amp i could get.

So I used to have my quad stereo speaker setup for my home wired in parallel and then I was re-doing things and I always noticed it lacked any bass, so I thought it was maybe because i was creating a 12-ohm setup for my 8 ohm stereo. So I rewired it so I would be creating a 6-ohm setup which did improve my bass response. But when I did this my rear speakers got about 3-5db quieter which is good to me because they have a higher sensitivity so they tended to drown out the front anyways. But I am wondering why would my front speakers being wired in the beginning of the series setup be louder now? And if this is how it works wouldn't wiring a dual voice coil in a series caus…

Well I was down in Florida visiting my dad and this event just happened to be going on. So I was there. I did IASCA bass boxing tied for 5th doing 146 in a 60 second run. To bad bass boxing doesnt take watts into consideration the guy that beat me was running about 5000 watts of more power only doing a 150.1. Didnt see to many Sundown setups there. Galactic Monkey was there with the 24 15"s off I think 8 3000d's. Well here the pics! 6 Solo X's Ricer Awsome looking explorer that beat me in bass boxing and I still have no clue what he was running. GalaticMonkey (Chuck) was there! WOW I sat in this thing its definetly crazy. I love Sundown! Bagged out van. Was still com…

Hey guys i need help on a port design for some Fi bl's. Like width and height.going into a 2003 camry. LET ME KNOW IF MORE INFO IS NEEDED.