General Audio

I've searched and searched and havent found anything. Im looking for a box designer program that helps you desgin 3d pictures of you box> thank you for looking!

Got 2 MB Quart 12's in my Jimmy right now. 300w rms power handling. I'm running a SAZ-1500 on them. Any guesses as to what it will do? It's tuned for music not burping so it's not gonna do anything crazy. I was just have some fun seeing what I could get some cheap subs to do.

I have an XCON 15D2 and a DC Power 180 amp alternator on its way to my house .....and Argent Audio is building me a 4.0 cubic enclosure with a tuned 32hz flared port Hmmmmm...... Sundown SAZ-2500D or Stetsom V 2K5E 1 ohm? 2500 watts should give me a little bit of headroom After I get the low end taken care of I will focus on the mids/highs. Build log coming soon. Oh yeah....going in a Hyundai Elantra

I ordered some Rattletrap from fatmat.com. Its been almost a month now. Still no product. I called there site, The number is invalid. But it's not the usual robotic womans voice that says it. It sounds like some Hick woman saying it. All my e-mails I sent are returned to me saying the email is invalid. Im getting p1$$3D really bad. What should I do? ~MadroX

So for the first time ever, I set off some car alarms. LOL I know for most of you guys this isn't uncommon, but I've always thought it was a pretty cool/funny thing and I've finally done it. Pulled into the movie theaters parking garage bumping some Jeezy with my friends and not a second later 4 vehicle's alarms went nuts. (Sorry if this bores you. The little things in life make me happy )

Hey guys! First off let me start by saying that I love this site and it is the best car audio site there is in my opinion. But there are a few things that I noticed with some of the members on here....Some of you guys are very rude. I'm not going to say any names but some times you guys come off as rude. There are some guys on here that are new on the forum and car audio and they might ask a question to some might think is very simple, but to them it's something new that they are trying to learn and coming on here to gain some knowledge from you guys who I feel are very knowledgeable. I hope I did not offend anyone but it's just something that I notice that I thought I mi…

Hi everyone! since my bax is built, it looks kinda naked. I don't want to do the standard carpeting and was thinking about trying something different. I thought about using a roll-on bed liner. Does anyone have experience with this stuff? Any pros or cons? Thanks

Saw a similar post on ****, but it seems like everyone has an opinion without any real experience to back it up. Why do people in car audio hand out info so freely when they have no clue on the subject? I've been building boxes for over 10 years now and I feel like I've just scratched the surface of enclosure design. But if you post a question on boxes on just about any forum you'll get a flood of advice from kids that have never even built a box. Pretty frustrating. Is there any forums for just box builders? If not, there should be. Kirby get on it. Anyways, sorry for the rant. On to the question In your experience with 4th orders, what ratio sealed/ported do you think w…

Post up any power wheels photos. plz Thx

Hi soundsolutions it has been a while. Life has kept me extremely busy with school and work and not to mention I now have a baby girl on the way. I had a SSD 15" and a zx750 and I ended up selling the sub for rims and traded the 750 for a t-1000 which ended up toasting itself somehow.. long story short I have nothing.. I really don't want to spend more than $300 for the sub(s) and amp because I am strapped for cash and I just want some kind of low end nothing crazy. Size is somewhat of a issue, the 15 took up my whole trunk and I can't afford not to have trunk space anymore so a single 10" or 12" with like 4-500rms would be optimal. I will be building the box myself depen…

on my way home last night i noticed that 1 of my 4 sets of comps wasn't working. so i was getting no volume out of the tweeter or the mid bass. I quickly realized it was channel 3 (front right). here is what i did: First I checked the resistance of the speakers and i got an ohm reading of 4ohm each speaker (mid/high) • so this tells me that the speakers are fine Second I check the output of the amp by putting my dmm in voltages A/C • I then compared the output of the channel 3 with the other channels and i got the same amount of output on all channels • so this ruled out my amp as an issue Next i put the dmm in ohm, and check the wires going into the amp leading to th…

Hi everyone. I finally got my system installed and want to take a vid of it to post on here. My question is what kind of cameras work well for good sound reproduction? video cam? or point and shoot with a vid option? I see alot of vids shot by cell phones and in my opinion are a bit annoying and doesn't do anyone any good. So without putting a mortgage on my home to afford a good video camera, I was just curious as to what others around here are using. Thanks!

i was talkin to a buddy of mine the other day and he was braggin on his system in one of his rides and i asked him what he was runnin and he proudly says" i had a pyramid 2400w amp then i traded up for a audiobahn 800w and i think i gained a bunch of deebees". well i am not one to laugh out loud in a guys face cause he was so happy with his stuff, but i couldn't help but think wow his stuff sucks! lol i aint no competitor or nothin but pyramid?! audiobahn? and it wasnt the hc audiobahn either so i know it sucks. and i went to a car show not too long ago and this guy in this riceburner has PA stuff and his woofers were mismatched one 12 PA and some other woofer might as we…

Ive been playing with my front stage for a little while and its just not cutting it for me.. let me give some info here, I have a 18" BTL running off a sundown 1500 @ 1 ohm, Damn speaker hits real hard (ported box). in a 97 Tahoe 4door. I dont know much about running a proper sounding front stage, i have deadened the 2 front doors and placed a pair of Zapco i-6 components in the front 2 doors. Powered by an older fosgate 600.4, using the supplied crossover (passive i believe?). I also have 2 eclipse coaxial's in the rear doors running off the same amp as the fronts. I have done the whole Velcro thing on the tweets moving them around to see what I like best.. they sound j…

You guy at SSA are doing a great job with the web site, the support, and also the products. This is by far the best one stop shop car audio site that I've been on. Thanks for the great customer service and wonderful products.

Everyone post them up!! Here are the pics: http://www.carlisleacoustics.com/albums/thumbnails.php?album=57 and the vids: http://www.youtube.com/thefordmccord

Here is the TEMPORARY setup: 04 Audi S4 Deck: stock, low signal outputs converted to RCA with Soundgate LOC.22 Highs: stock components, 2ohm each Subs: (2) Crystal CPE 8" in rear deck, infinite baffle, 8 ohm woofers Amps: (2) Sony XM2252HX. One is on the highs, high current mode @ 1ohm/channel. One is on the subs, high current mode @ 4ohm bridged My question is, the subs bottom out real bad...worse than my stock 8 and at less amount of volume. I still need to seal up a major leak from the trunk to the cabin, which I will be taking care of tomorrow but that should only fix the volume portion. Considering they are just 8's, should I just run the built in amplifier high pass…

Hey guys. Ill be coming back to the U.S from Afghanistan next year and by that time I'll have enough money saved up to upgrade my sound system a bit. I'm in need of someone who is good at building ported enclosures around the shreveport, la area. I'm willing to drive a couple hour to have this done. Any help of info would be greatly appreciated.

So my headunit Pioneer DEH-3200UB only has 2 sets but I plan on using a 4 ch and a mono block amp and need to know is there a way I can expand it to my needs.

Hey guys, just bought a 2007 altima sedan, fully loaded. It has the bose system with the navigation in it. The speakers sound good, but its a little lacking on the low notes. Questions.... 1. Is it possible to wire in a sub to the stock system? 2. Does anyone here make a box similar to http://mobile.jlaudio.com/products_stealthbox_detail.php?fit_id=1620 ( they dont sell just the enclosure ) 3. Looking at a 10" icon, fi q, or lethal injection. 4. Main goal is a clean looking trunk without taking out the spare. Been looking for a while, but havnt been able to find anybody doing boxes like this. Any opinions/help is greatly appreciated.

well here's the deal. I've been into music production and recording engineering for a few years now. I've just recently got the idea to incorporate these skills into my car audio hobby. I'm posting a song below which I produced myself that peaks around 43-48 hz. I know it's not quite as low as most of you like to pound to, but hey it's my first attempt at making one of these. I'd like to get some feedback from you guys as to what you think I should do as far as going about making these tracks. I'd love to continue making them for the fellow members to use in their demo's/videos. If you guys could check out the song, download it and try it out and leave some feedback and/…

i like ambient stuff, plus i love bass. techmaster peb is my hero if any of yall can remember that name a lot of my favorite songs by him were really smooth and musical. i try to make my stuff like that (musical that is) here is a couple of tracks i made with fruity loops. i figured i'd share and see what yall think. i don't have a production studio and i am not trying to go into business or anything, just love music, i figured since i saw sombody sharing his hard work maybe i could share mine also. beware i put a lot of low frequency tones in most of my songs! please dont be too harsh, i worked hard on these, i'm not a computer whiz it took a lot of my time to make th…

Here is what i have and what i am trying to do. I have a 2003 Saab 9-3 with 7 speakers from Factory (3 on the dash, front doors, and rear deck). I have 4 sets of Kenwood Components that i wish to install in addition to the 7. I will be replacing the 7 factory speakers with 7 Kenwood so i can keep the sound consistent. My Idea is to install a pair of speakers into the back doors. I am in the process of making a new custom fiberglass Rear deck which has holes for the Original speakers and a slot in the center for 1 component set. I am going to build a new center storage compartment so that i can place my last component set there. What i am looking to do with wiring is t…

I'm a bit old school I guess but I enjoy searching the net for old school amps and subs just to check em out. Do any of you have anything old or rare laying around? Not looking to buy, just a few pics and info would be cool.

What do you guys think of a btl 15 and an audioque 2200d