General Audio

Sorry if this is in the wrong section, but its the only one where I see it fit. But anyway, I've been waiting since May 3rd for my two 12" SSA Xcons, order status has been at "awaiting shipment" every since then. It is now june 16th, and I feel like driving to the build house in Nevada and helping them build my xcons in order to speed up the process lol. I have been emailing SSA often (sorry to the guys at SSA if I've been a little aggravating lol I've just been very excited to hear these subs) and all they can tell me is "you will have them shortly". Just wondering, for you guys that have maybe placed SSA subwoofer orders either late April, or early May, have you recie…

The anticipation is killing me. Summer days go by and I'm not bumping. How long am I looking at to receive my single zcon recone? Ordered on 6/7. I was hoping it would arrive in 2-3 weeks. Anyone have any input on how long it took for them to receive a recone?

Alright so when I get out of college soon i plan on buying a Mitsubishi Evo as I am completely in love with them lol. Ive got an Fi BL 15 now and it just doesn't do it for me, not loud enough at all. I would love to have a ridiculously loud setup for the next car, and was considering an SUV so I can go even louder, but hate driving them. What is the loudest setup I can put in a car without walling it off and without worrying about the windshield cracking on me? Would love to stick with Fi and upgrade to btl's. Would one Fi btl 18 be too much, or two btl 15's? How many watts roughly until i have to worry about the windshield?

Basically just want to have an idea of how loud should I be able to get with this setup. 1 Fi BTL 18 Fully-equipped @ 1ohm 1 Sundown 3500D @ 1ohm Big 3 1 XS D3100 battery (under the hood, main one) Alpine 9887 HU Maybe 225amp alternator Zero gauge everywhere. Enclosure around 5-7 cubic ft tuned to 30Hz

Yes guys do you know how many Alt. can be installed in an 1999-2001 Chevrolet S-10 Pick-Up. Thanks

heres the situation..from my battery under the hood to the back of my truck is about 10 feet..but im giving a extra 3 feet better to have more then less..and im also running 2 batteries under the hood with 2 batteries in the back..now keep in mind i have never installed my own stuff ive always had people i know and trust do it..so im just buying the wires for them..so by my calculations i should need somewhere around 25-30 feet of 0 guage wire to fulfill this project? by the way the 2 batteries in front will be about 4 feet apart from each other..1 on each side and in the back the other 2 batteries will be next to each other.and there will be 2 amps back there has well..c…

I’m running 2 skv2 1500.1s at the moment strapped,gonna be adding 2 more..What do y’all recommend for 1/0 runs to the back battery bank?Also would 1 dedicated run of ground be enough?

For meh trunkkkk Its average size, I wanna do 1 layer 50sqft, 100sqft?

I have a 15.5 cu ft trunk supposedly.... thats Manufacter specs of my 1996 Taurus. How many Sq Ft of damplifier should I get to cover the Walls, Lid, and Floor completely? How ever much it takes will dictate which Damp I get. if 20 sq ft will do it I AM A get Damp Pro but if a little more than that is needed Im going to get 40 sq ft of regular Damplifier and just add a second layer with whatever I got left.

Okay I've been on these forums and have been looking at a lot of box designers and box designs. I was just curious to find out how much everybody paid for their enclosures/ sub boxes? This is not for the experts who can make their own boxes though your expert quotes are welcomed. This is for those who don't know and are learning how to make enclosures and had to pay lol. Also state if materials were included or not. If possible give the length of time it took. Pics would also be a plus.

Short story, bought a new amp locally, it makes my subs murderlize my back window (SUV) About how much did you guys spend on deadening? I'm thinking of doing my front doors, the driver's and passenger's floors and the back hatch. I've never done this before so I don't know how much of anything I need and really don't wanna overkill. I will get some measurements this weekend but I'm just looking for input right now. Probably gonna use SDS unless somebody comes in with something cheaper that's butyl and effective.

ok so im thinking a ssd or bl 15 in my trunk but idk if i have the room. can some one tell me how much cubic feet i have to work with in my trunk? height = 17 depth=22 width=42

I was just asking because on the ups tracking label it says 40 pounds(not shipped yet Just label). Or do i go off the site were it says 55.

I have been trying to figure out a good 32hz box for two jl audio 12w6v2 but so far no one has been able to help me without saying i can build on for you. I already have all the wood and other stuff so i would like to make it myself. If anyone can help me please let me know

Granted there are 2 types of consumption even in comp there are definite demarcations to power limits. With the introduction of 3k, 4.5k, 10k and strap-able options where does a person draw the line which is akin to Jumping the Shark?

Ok this might sound retarded.. but seriously... i dont want to waste my time in a Car that isnt my friends car or so.. and yet get a low charge... i used to do installs for free.. but nowdays.. its somehow impossible.. any ways... i will be Installing a JVC HU , JVC CD changer , JVC 6x9's Rear, and a single 10" kenwood Sub..And a For Channel Amp.. in a VW Polo 2002 .. and he said he want to run it free air... am not sure thats possible.. when there is no trunk to seal it off...his excuse was that he doesnt want to loose any more of his tiny space left behind the rear seat.. am gonna convince him about a tiny Sealed box... any ways... Average... how much should i charge hi…

For a 12'' Zcon in 3 cubes at 32hz. How big does the box need to be gross? I can do 30 wide and 15 high, trying to figure out how deep the box needs to be.

hey whats up i have a 94 ford econoline van, i was hit ting 138.3 in it, and i had 3 12" kicker solo barics, with a kicker 1500.1 amp that was ran to 2.6 ohms so i was gettin about 1000 out of it, i just recentyl installed 4 15" solo's and a 2000 watt sundown that will b ran to .5 ohms, with a 13.3 cubic fot box, im also installing a second battery, how much do u think i wil gain

1. To run 1/0 gauge through my car ( i got quoted 30 bucks) 2. Install an amp and a sub with box and wiring for a friend 3. Install a HU 4. A full install (2 sets of speakers, 1 sub, and amp with wiring and box) just wondering, cuz pple are askin me to do these things for them (except the 1/0 gauge wire).

(1) Alpine SWR1242D (1) MB Quart DSC1000.1 Sub is 4ohms with two voice coils. The amp also has + + - - option. So, should I wire each voice coil separately and voice both sets of + - or wire the vc's together and just use one? Thanks for any advice, I have no idea lol.

So i will be doing my first install sometime this week. I dont know how to set the amp levels (i will be looking on what fits my needs) so in the meantime im posting this. I listen to mainly electronic (trance, techno, dub) and metal. So i want my mids to hit nice. And maybe some lows.

I bought a dcon 12 before I switched cars. I want to put the sub in a ported box, the site recomends 1.75 cubes but has anyone had success going smaller? Reason being I need to put things in the trunk from time to time as well as have access to the spare tire. If need be I was considering reconing the sub to a 10, but I'd really prefer not too as the sub has never been used. If it matters the sub would be recieving 350 rms. Thanks!

So I just installed a LOC on my front channels and ran the RCA cable to the rear..Tried to take off the passenger door panel based off what I found on google. Didn't work out so well (Said screws were somewhere they werent, still no idea what I need to unscrew to lift the panel off..) Any tips? Vehicle is a 2006 tahoe.

Isnt that the top of the suspension? How to get to it from trunk?

I just installed 8 brand new cadence comp. speakers, took out the factory speakers. I wanna blow them up, can someone tell me how. I heard that hooking them in 120 volts (regular outlet) will do the trick. Is there an easier way, or another better way? Kinda a goofy random question, and if not allowed on this forum, an admin can just take it off. =] thanks