General Audio

Just looking around, i dont want to post a thread everytime i have a question. So i was just wondering if anyone had some good websites that i could look at that would give me some good quality information on all different types of enclosures. Iv been trying to look but im mostly finding build logs and i dont want to be reading up on crap. Thanks guys.

My friend recently purchased a ford econoline 350, 1993 mind you, and needs some help with it. Before I actually ask the questions, has anyone had any experience with this type of vehicle?

So my headunit Pioneer DEH-3200UB only has 2 sets but I plan on using a 4 ch and a mono block amp and need to know is there a way I can expand it to my needs.

Well, I usually stay away from all the local shops, there about 5. But I was bored so I went around yesterday to see whats new. Theres one shop thats actually pretty knowledgeable/cool. A old guy at Autosoundaddiction(VERN) We were sitting around talking, this kid comes in with a 15" Team RF fosgate(sweet SPL 4hp sub) the dustcap was loose, but he was sure it needed to be sent to the factory for "repairs" Tested the coils, their fine. Vern says " I have some CA glue in the back I'll just glue the dustcap back down and you'll be good, save you a couple hundred" The kids like no"I don't want it half assed, it needs all new parts." WOW I tried to tell him, that its jus…

(just to stir a little traffic) today, i will be building a box to go in a x-cab ranger that will hold three memphis pr12's. it will be a shared chamber 6ft^3, with 62.5in^2 of port and tuned to 35hz. these will be pushed by a mtx 1501d bieng shown 2.6 ohms (the subs are dual4, will be series, parallel), so i'm guess around 1000-1200 wrms. i've already replaced all four factory speakers with memphis pr5x8's (major improvement) being pushed by a rf 100a2(yep, the 5x8's are bridged left and right side [they are 4 ohm] so no fade) all being directed by a eclipse h/u. i'll get the model number tomorrow. pics either sunday night or monday night. now, my silverado will be losin…

Is there a fix for this?

A buddy of mine is looking to upgrade his audio, and between him and I we are trying to get some ideas about what to buy. He has a new(ish) (2004-2006 probably) cadillac escalade. Not positive of the max dims, but I can get exacts if necessary. I'm just assuming similar to most other large SUV's. He is running his stock head unit but willing to upgrade if necessary, which will most likely happen. He is considering (2) 18's or maybe even (4) 15's or 18's. I am looking for suggestions as to what subs and amps to buy, but even more so to what else is necessary to accomodate such a large amount of RMS. He is running his stock alt. So, besides the Big 3 which I know he wi…

This is a program called Audacity, its pretty cool. allows for a lot of editing and line in recording. Check it out its free and there is no spyware or virs attached to it...which is a plus. lol. http://easynews.dl.sourceforge.net/sourcef...y-win-1.2.3.exe

Just finished putting together my DIY home subwoofer. I used a Soundsplinter RL-p15 DVC2 and an Oaudio Bash 500 watt amp...... the box is 4.6 cf gross, 3.2 cf after port/bracing/speaker deductions. The box is made of 1.25" mdf and oak vaneered. The port is 2.25" x 16" and 43" long tuned at ~24hz. Mike at Soundsplinter and Todd at Oaudio are two of the greatest people and are willing to help in anyway possible. Also, I can't say enough good about their products!!! I tested the sub on Pearl Harbor and the Japanese attack scene almost brought down the walls..................

hey guys i have 18in fi BL dual 1ohm being powed by JBl gto 1200 amp and just wanted to make sure i get a speaker wire that will allow enough flow of power and still fit. any help i'd appreciate it.

Hey guys i have a 225 amp Excessive Amperage alt, 2 runs of 0 gauge and 4 yellowtops. My voltage never reaches higher than 13.6 and idle at like 13.4 with the music turned down. What could be my issue? also im running 6k rms and dom at iraggi said he can build me a bracket to run dual alts. I would throw my stock alt back in there maybe add one more yellow top and do one more run of wiring. Would this help me out alot? Or do you think if if fix my other issues i should be ok, thanks

I was riding a little while ago and All of sudden no more bass..and I go back home and check everything Subs are fine(I know cuz I took them out the box and nothings wrong with them) and Amp is on...I'm confused Anyone know what happening???

Hmm....after posting this I realized that my topic description sounds like a pirate. But, anyways.....help me decide what to do with my stereo...LOL. I can't decide if I want go with an active 3-way DIY frontstage consisting of Coustic Design Reference & Vifa speakers, or go simple with a pair of Memphis Sync8's On the one hand, I really like the sound of my DR 7's when I was running them with my horns. But, likewise, the Sync8's are responsible for many World Championships in SQ comps, and I do really like the sound of audiolife's Sync 5.25's. Plus the installation and setup with the Sync's would be much easier and simpler and would allow me to use my external d…

I got a couple hundred bucks to burn and want to see what I can do with my leased 2003 Jetta. I will want to keep the stock headunit in (will it still be possible for the system to be good?). Speakers, amp, and sub is basically what I will be limited to. Can I make something happen on a $300 budget? Are bazookas/powered subs total crap? I don't want cheap sounding, ground shaking bass. I would say I'm looking for 65% clarity and 35% power

does anyone have experience building this type of box? well for the time being im gonna use one atlas and figured since i've allways wanted to try this box design heres my chance. this is what i have so far. max dimensions 14-h 37-w 20-d so around 4.7cf, ok now i was gonna make chamber A 14x26x20 so 3.2cf and chamber B 14x11x20 so 1.2cf. now using one 4inch port 15 inchs long chamber a would tune to roughly 25hz and chamber b would tune to roughly 43hz. so how would this do? i tried to stick as close as possible to the 1/3 rule. also tuning that low will i lose my upper end response, like in the 60+hz range?

ok so i got the fosgate hx2 15 instead of a sundown z15 because the guy lowered the price to $150 it was BNIB. so i built a box tuned at 30 hz put it in my backseat playing with the placement. its only ran on a bazooka 500w mono P.O.S on a busted ass pioneer deh-p3500.in a 76 caprice btw, well anyway at the first of march im gettin some money and im gonna get either hifonics bxi or a audiopipe 1500....ok well im looking into a new head unit im looking for something around $150-$200 with 4-5v pre outs any recomendations?and maybe a pair of 10's or 12's so the hx2 isnt lonely.......or sundown 8's just looking for ideas and you guys have been alot of help so far pics up tom…

Hey guys.. looking to do a system in my F-250 ext cab. Its the new body style 1999. Anyone have any install ideas? I have an eclipse 8445 installed. Nothing else clean slate! Pics? Previous installs you have done???? Thanks William

hello ssa, havent been around for some time, and so i got an iphone!! downloaded the pandora app and could not wait to get the dubstep station rockin in my hatch. got it playing on the phone then plugged it in and it starts playing my itunes, bypassing pandora. i have a cda 9847 from when i first got the car. i remember it came with a converter box so you can plug in your ipod into it. im thinking thats just out dated as it doest charge my ipod video and iphone. can you even get a newer one that will work with my hu?

Don't know if it's the correction to post this, mods please move it if it's in the wrong section. Boston Acoustics Exits Car Audio February 23, 2012 by Amy Gilroy Filed under Car News, Home Page Featured, Industry news 5 Comments Boston Acoustics, a 23-year fixture in the car audiophile market is exiting the 12 volt aftermarket as of April. The company will instead focus on its home audio products including speakers, soundbars and radios, and will also enter new home audio categories, said Sanjay Sharma, national sales manager of Boston Mobile Audio. The maker of GT amps and PRO speakers informed reps and key accounts this week, that it will exit the market by the end of…

Not sure if there is a thread for this already? if so please let me know, id love to see it! so far i enjoy watching some of "exoabigdeal" videos. hes done some stuff with SSA equipment also. and caraudiofabrication is another good one. and ericthecarguy showtimeSPL prefer channels that explain how things work, to learn about the equipment and that show different neat builds, some that everyday people can do, and sometimes more advanced things being done thats cool to watch for example from exoabigdeal with SSA 15 inch subs. 8 of them.... lol 8! anyone else?

I have two different brands of speaker wire that are turning green inside the jacket. It is not turning green at the ends just in certain areas of the covered wire. Ive spent two hours googling and just seen multiple forums and websites where it turned into an argument whether the discoloration was due to oxidation or the chemical reaction between cheap insulation and the copper wire. Please don't turn this into a pissing contest. Either you know or don't know, don't need guesses. What causes the discoloration and will it affect the signal if used? Remember its not at the ends, just restating that for the people who can't read. One set of wire is brand new and it came lik…

OK, i've been doin research on this and i can't get a hold of excessive amperage or Iraggi so maybe someone on here may know. I had planned on running a Lanzar 6000D with an Alpine PDX 4.150 300A iraggi alt with HC1800 and HC2400. Well, i've been doin some research on alts and it said once you reach 300A alt case size, it is extremely large. In order to have adequate cooling, they are normalls about 12" wide by 18" long! There is no way that could fit in there without doin some extensive re-running of the AC lines, but Iraggi makes alts this high which is odd. I drive a 2007 Scion tC by the way, 141hp dyno-ed stock auto, 161hp at the crank. Ok, it is also true that for …

Ok I promised a tuturial on how to package a heavy item so here it is. I recently had a pair of Shocker Sig Motors ( 80lbs Each) shipped to me. I explained to the shipper my technique and once again it worked flawlessly. Motors before shipment First thing you need to do is locate a box that is around 2-3 inches larger than the item you are packaging all the way around. Then you stuff the bottom of that box with a layer of foam pool floats (yes the kind like this) after stuffing the bottom full of noodles sit the item you are shipping in the box and fill the sides with pieces of foam. After that you need to put a layer of foam on top inside that box. You want this bo…

Hi guyz, As usual, I like browsing through forums and I came across one thread about new items from Audison shown @ CES: http://www.mobileelectronics.com.au/forums...mp;#entry927565 You guyz might need to register to the forum first to view pics of: - New Audison Thesis 2 / 4 / monoblock amps - New Audison Thesis Bit One processor - New Audison Thesis speaker line Enjoy! Kelvin

first off i REALLY hate to be "that guy" that posts these, "help me build my sytem" threads. however i guess i just have to break down and do it. so. basically heres my deal. current setup is this 4 diamond audio d1 tens, downfire, sealed with a cube per sub diamond d3 1100.1 diamond d1 250.2 alpine type r 6.5 component set alpine ida-x001 head unit i hit 135.6 db on a termlab playing the wocka flocka song "no hands". i couldnt play their test tone cd cause the alpine is a media reciver and i had no way to the the cd onto my hard drive to playback. nor did i know what a sealed box should even sound best at. but thats irrelavent. im planning on this setup next, money i…