General Audio

After too much planning my friend has decided to drop money for the system in his maxima and here is what we came up with... Headunit: Pioneer Premier 6900 Amp: Kicker 650.4 Speakers: Pioneer Premier TS-C720PRS Subwoofers: 2x 12" SD-1 Miscellanous: Knu 4 Gauge Amp Kit KOL-AK44 Deadning: 1 Roll Raamat BXT and 5 yards of ensolite Mostly I will be stuffing the deading and ensolite into the doors and trunk to help the midbass and trunk rattle as much as possible. The 2 12's will be in a ported box tuned nice and low (sub 30's). I'm thinking a foward fire with ports runni…

what songs do u recommend listening to with lower hz?

I rebuilt my box and actually made an advance in performance. The amps can be driven more before they want to clip. My question is, when I measured the voltage (at Idle) while driving the system higher, the voltage on my two Kinetik 3800's dropped to 12.4 volts. I do have another Iraggi 260 Amp Alternator. Do you think I should install it? I wouldn't play it at this level normally but only to either brag or at a competition. Advise please. Thanks, JR

I just bought the Pioneer DEH-P6000UB and i love it but... wut should the low pass frequency be set up at as well at the hpf? i want a sound system that gets the best outta my mids, highs and bass

I know someone that doesn't know much about audio and box tuning and such but managed to build a pretty good sub system. He had 2 10's and built the box like this, his words, " I built a box, drilled a hole, and stuck the pipe in." It was a flared aero port 3 or 4 inches diameter, not sure. It was in a chevy tahoe and sounded good and got pretty loud too that lucky sob. Does anyone else know someone who got lucky?

How to install external 4-channel amp and mono block amps into Mercedes Benz cla300 2016 with Harman kardon factory upgrade.. Keeping factory head unit console and steering wheel controls?

Thought you guys might like this. Not sure if there are any Mac Miller fans in here, but it's a pretty laid-back mixtape. Not any songs I dislike. Mac Miller - Best Day Ever

yeah well since bimmers alternators are expensive i decided to see if caps would do anything for me. Theyr gona be strapped to a JBL 1200.1 for a total of 2 farads. i didnt want to waste money on caps so i bought used ones that i got for 25 bucks shipped for non digital and 35 shipped for digital. I just came up with the rack idea when i was about to put em in, i grabeed a peice of leftover MDF wood from the box i made and put some leftover carpet on it and screwed it to the side of the trunk over my optima red top battery with a couple L brackets. Turned out pretty sick and im waiting on a D2 so i dont know yet if theyll do anything to help the dimming. either way i…

ive been blabbering about it for months.ive done my comparisons and looked at these and looked at those and ive finally decided that i am going with Audioque...sooo i bought a single audioque sdc2.5 10... if this subs lives up to my expectations then ill be buying 7 more very soon...yes i said 7 for a total of 8...these will eventually be walled off in my truck but for now theybe going in my current box.which is a design by Pete at hexibase.ill build a a few different boxes for it and test them all.. pics and updates when it arrives...im on my last leg when it comes to 10inch subs so i hope this works out..

Just to start off, this was totally and 100% my fault. In no way is the DD-1 to blame. I got the DD-1 from PHILLIP LILJESTRARD who is from OR to test out, I will be buying my own DD-1 once the CC-1 becomes available as I KNOW there will be a combo deal. :drinks: Anyway, I was setting the gains on my SAX-100.4 and turn everything up to full power before distortion. Set my M3a and was done. Turned up the system and it sounded great! Played a song or two for a friend, he confirmed it sounded better. Middle of song 3, I smell something weird, then the rear speakers just stopped and I saw the smoke. I was like <_< , as I had forgotten to back the rear gain down as I…

Ok here is something I came to. People buy the most exspensive batteries and high output alternators, and still experience voltage drop at 11 volts and steady decline. What do most people do to solve voltage drop.

Alright everyone with a zcon needs to hurry up and make some videos haha!! I know people have been buyin em up...so stop being greedy and share it

Setup - 1999 Ford Expedition 5.4L 2 x 15" MTX 9500 1ohm setup Crunch GP3000D Amp ----------- Electrical: Big 3 of course - 1/0 Gauge Stock Alternator - I JUST replaced this thing a month ago, previous alternator crapped out on me. Question: Will the D3100 battery (second) be enough to handle the electrical? I plan on getting an Optima Yellow up front. Worse case scenario, I can always just upgrade the alternator. But i'd rather not if I don't have to. I just want a good steady voltage. ----------- I was planning on going with 2 18 BTLs, but found a great deal for 2 15 9500s for only 500 total - so I'm going to jump on it. Any/all answers are appreciated. Thanks.

Hey, I'm looking for a bit of advice. I bought some 6.5" Focal component speakers for my 99 Civic LX which has 6.5" stock speakers. The problem is that the Focals appear to be a hair larger than they specified... The diameter of the speaker is a good 1-2mm wider than claimed, which means I'm forced to do some modification. I would probably just huck them on eBay, except a) I really like their sound, and b) I already drilled / installed the tweeters on my door panel. So I'm left with a tricky situation. I'm debating whether or not I should be cutting the metal ring around the speaker, or the plastic on my door. They both have pros and cons and while I'm slightly handy, I'm…

It was between posting on here or in home audio but i just decided to post here.... my older brother has a Sony WM500 subwoofer that he bought a couple years back and does not use it so I decided to start a fun, little, "screw around" project. I have already taken the powered amp off the original enclosure and disconnected all the wires. Also I have taken out the actual subwoofer and taken out the power on button from the sub and I am planning on building a box for this sub. First off here is the subwoofer w/ powered amp: http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=11027875 Ok, so the box …

My dad's friend recently asked me to help build him a system after hearing a previous setup I had and decided he wanted something as well. His budget is around $1300-1400 and wants to incorporate an in dash dvd, no need for nav, but with touch screen, BT, and IPOD capabilities. He drives a 2009 Ford Lariat F 150 and would like to keep customization minimal and realiability high. He primarily listens to country, oldies, classic rock, blues, and jazz. He doesn't necessarily require a large amount of bass, I guess just enough to add more depth. So a daily driver car but no means will it be an SQ or SPL car, he does not have much exposure to the field so I won't need to …

hello all, my name is Marco, this is my first posting. I have recently gotten my hands on a DD 9515g d2. I've never had a sub this massive and i've never used aero ports. Im a DIYer to the max, which is why i created this thread. My purposes with this sub is for DAILY "&quot;SQL&quot;". Im working with either a SAE-1000 or my old MTX 1501d and hope it will run at 1ohm after my BIG 3 upgrade, either one will suffice. So here's my project. Im building a middle console box for my full size Chevy ext. cab. I've already done one in my old standard cab fullsize with a 2512 d4 with the 1501d on it and it the output was incredible. Im gonna try to get 4 cubes with ports i…

hey everyone, i just got a ford ranger single cab and i want to put in some audio stuff but i don't have any idea about this kinda stuff. i took some measurements and i have 9" of depth clearance so i was looking at a 12" kicker sub encloser, a sony 900 watt amp (it says Mono subwoofer amplifier, does that affect anything?? ) and a jvc Arsenal reciever. will all the different brands be allright togeter and will i need a different battery or anything? also on crutchfield.com i saw a ranger single cab sub box with amp made by mtx would that sound better intead of the kicker one? does someone have one by any chance? thanks to everyone

Are they ok to use as a primary and secondary??? I can get a great deal on 2 blue top Optima Battery's. I want to use one under the hood (for the truck), and a second one inside (for the system).

I'm in the process (literally, just came upstairs to ask this question haha), and i was fitting my marine terminals to my battery. I'm not sure if its a problem, but they don't go down all the way, and even if they could, the bolt wouldn't be able to go through because the holes for it would be so curved. When i bolted it down, it wasn't going anywhere, i'm not worried about that. I'm just not sure if it has to be at the very bottom for the least resistance and best flow So can i leave as is? or should i get new terminals (though i didn't see any bigger than what i have now).

Need an alternator bracket done for more than a reasonable price? I just got mine for 1/3rd of what some of the people were asking! Nathan from Excessive Amperage suggested I contact Mario from [email protected] about making a mounting bracket for my 2nd HO alt.

1992... I was 13 years old and was bugging the hell out of my local car audio shops thanks to Mark Fukuda. My Mom bought me Auto Sound & Security every month since I was 12 (including MiniTruck). I had my first Kicker 8" sub at age 11 (hahaha my enclosure for it was a Tuperware container) Lol Kicker and MTX was the shit back then. Omg MTX IB was bang'n!!!! Anyways....1992... Mark Fukuda... as I turned the pages my jaw dropped. I honestly, 19 years later have never seen a better install. I still remember reading about him playing Floyd - The Wall at 150db. I remember thinking who is Pink Floyd lolololololo If I remember his 16 15" hit 152.x or 156.xx....man how time…

How many of my fellow car audio fanatics are located in Maryland? I know I'm not alone, I'm just curious. Plus I would like to have someone to share my system with when I finish it.lol

Custom Cherryman box, 1.6 ft3, tuned at 34, wired at 1ohm I'm deciding between a new IA10.1 for $390 or a gently used SAZ 1500D V3 for $360. I know the SAZ is under rated but I cand find any bench test results on the IA10.1. Im imagine the 300 RMS between the two amps cannot be heard by the human ear. Would there be any difference in SQ between the 2 amps?

So I am planning on putting a 1000w amp for a sub and possibly a 600w for my component speakers in my 01 civic. Can the battery handle this and if not what should I do? Thanks everybody