General Audio

im going to mount 6 inch pvc to mdf, last time i did it i used liquid nails. i want to know if theres any thang better? also i think im going to sacure the end, should i?? i was thinkin some sort of epoxy? what do all u think info please. thank you

At what frequency does a tone go from unidirectional to omnidirectional? Im considering doing a wall build. I could fit 2 -12" or possibly 4-10" midbass pa speakers behind the seats to use strictly for midbass to keep up with the subs and the 4 pairs of 6.5's I have in my front doors. I know this isnt the best way (sq wise) to go about doing it but i really love strong midbass and it has been something i have been lacking for quite some time now.

ok well here it goes i had to 2 15"s rockford fosgate punk rfp3415 or something like that hooked up to my 1600 watt amp, it was bridged so....that wasnt looking good after a day 1 sub blew, and the next one did the next day. i didnt bridge them some guy told me to do it to get more power to the subs even though there 400 watts each. so now do some new subs i was looking at fi subs and they look like the right ones for me. http://www.adelcom.net/DieselAudio-NS-1600-Page.htm that is my amp that my brother gave me. i'm kinda thinking thats why its to much power through 1 channel. so my question is the amp that i have now is it good to power these subs and yes im getting 2 …

Maybe this is super simple...but could someone maybe help me with this? how do you calculate square inches of a port? is it just LxW of your port? Ive built my share of boxes and never paid attention to this rule...Thanks guys!

Has anyone had any experience with RD Audio equipment? Are they a quality company? I had Mike , who is tied in with the company, build me an enclosure for my BTL and it is ridiculously nice. If that is any indication of the quality of the company i might have to look into some of their stuff

I am wanting to deadin my jimmy, and was wandering what some good brands were and how much I will need....

Ok, First off, I am no genius at picking the stuff I want in my car, but I am pretty good with electronics as I majored in physics, and can beat my way around the bush putting it in a car. I really just want something that sounds great as a final product. My question to the community here! Q: I have an 06 Dodge Durango SLT (just the simple , no GPS or anything special). I want to upgrade the chitty speakers all the way around, but I'm not sure what to buy. Crutchfield is saying I can't buy component speakers because tweeters need to be placed seperately, which I understand, yet I think there is tweaters just under the front window. No tweeters in the back though I'm pre…

Yes guys do you know how many Alt. can be installed in an 1999-2001 Chevrolet S-10 Pick-Up. Thanks

Hi, I have cheaper stuff than most of you guys wipe your butt with. Anyways, I have a 2x10" sub with Pioneer speakers that say they handle 50-120w RMS (I know I know, don't laugh) and a 2-channel Pioneer GM-3300t amp that claims the following: Output Power (4 Ohm, <=1% THD) 60 Watts x 2 Output Power (4 Ohm Bridged, <=1% THD) 150 Watts x 1 Output Power (2 Ohm, <=1% THD) 75 Watts x 2 Now, since I am buying a pair of front component speakers, I wanted to hook them up to an amp. The question is whether or not I should use my current amp for the component speakers, or keep the cheapo amp with the sub and buy a new amp for the component speakers. BTW, the subwoofer…

so heres how it all got started. i had ordered some 6x9 speakers for a build of mine that didnt fit. i called and they said that they would send me an email with instructions on how to return them, they didnt. i sent them back with the order number on the bpox. emailed them back on the day that they were supposed to be delivered (Apr 1st) = no reply, no one would answer the phone and i had to send them a fax to get a rise from them, it worked! their excuse was they hadnt checked it in yet. i emailed them earlier like monday or tuesday this week. theyve had the item for 7days this past wednesday the 8th. i just emailed them tonight. heres what i wrote. the loving caring ca…

I decide to make a couple vids of hairtricks. My last box was much easier to do hair tricks because it was tuned at 25Hz. This box is tuned at 38Hz and is much harder. But its all for fun so enjoy... p.s. My mom is a teacher and we did this video for her students. This is the better vid.

I'm new to this forum and it's probably obvious, as I may be posting this in the wrong section. Anyways, I'm looking to get some component speakers for my 99 Honda Civic LX. I'm sorta on a budget so I'm just replacing the stock front door speakers for now. I was thinking about getting a pair of Infinity Reference 6020cs as they have great reviews on Crutchfield. However, someone in another forum told me that I could get better for the same amount of money, and to perhaps direct my inquiry here. Does anyone have any advice? I plan to use this with a Clarion DXZ585USB CD receiver without any type of amp for the time being... Any advice would be great. I'm super poor and jus…

basically, i've had a major drop in bass in my car. i have 2 fi BLs and 2 kicker 1000w amps. initially, i had trouble with my iPod cable(dock to aux cord , the 7$ one from ebay) so i bought a new one. well now all of a sudden, my cds have also lost the quality. the stock speakers in the door hit harder as of right now. when i turn the knob all the way and put the volume up, i finally get what i should be getting at about 1/4 turned. i looked at the amps thinking 1 of them was dead and they both were fine. i dont really know much about wiring but will probably read up on it 2morrow since i will have some free time to look at it, but this is what basically happens http://pi…

I'll be there with three vehicles. Who all's going and where are you coming from?

Long story short short... i bought two NS 15's from a guy on CA.com.good guy.he shipped what he said he would ship....but what i received was...ehhh...well...just look......

has anyone ever delt with http://www.dealercostcaraudio.com

Is there anything special to put behind the subs when you drop it into the enclosure so air does not leak between the sub and the front face they are resting in?

Lol so i found some old subs in my uncles garage and i told him i would take them off his hands they are Rockford Fosgate Punch HE 15". Need a recone but i want to give them to my little brother for a birthday present.

Is anyone willing to do a box design for me.... I have all the materials. I am just not able to design boxes myself..... thinking of using aero ports as well.

okayyy soo this weekend i finally installed part of the system on the new blazer and where i ran my power wire through the firewall gets reaaaally close to the right manifold and it emits a looot of heat. i put some split wire loom but its melting slowly hahaha i need something stronger. what do u guys suggest?

Okay I am thinking about purchasing a Kicker Solo Baric L7 15" and the guy selling it to me is charging me 200 dollars, is that a good price? It's about a year old and in a ported box. Also he is selling me a Sundown SAE-1000d for 250 is that a good price? Would i need another battery to run this sub?

Hello, I'm a car installer at a local shop. Me and a couple guys recently put front speakers and rear speakers into a 09 honda civic. The problem we are having is that the rear speakers are very very faint in volume. The rear speakers are hitting very hard with bass, it's just that the sound is very low. Also, when we turn the volume from the factory radio down to 4 the clean sweet unit unit just shuts off. We have the clean sweet unit hooked up through the factory amp. We installed component speakers in the front and rear. Any ideas?

I went to my first car audio competition over the past weekend. I finished first in my division ( amatuer). It was a neat experience. I scored well for my first show and met some really cool people. I got some help from a world champ sound quality guy. He brought out an RTA, we talked and tuned for about 2 hours before I got judged. Learned alot just in the short amount of time. Was all in all great time. Also wanted to thank M5 for his input and sharing knowledge. Cant wait till the next show, I can attend. This may be the start of a real addiction LOL!!!

I just installed 8 brand new cadence comp. speakers, took out the factory speakers. I wanna blow them up, can someone tell me how. I heard that hooking them in 120 volts (regular outlet) will do the trick. Is there an easier way, or another better way? Kinda a goofy random question, and if not allowed on this forum, an admin can just take it off. =] thanks

I decided to give my mom a very short preview of my 2 mojo 15's on my saz3000d. This is not the best reaction video because she has heard many of my previous setups. However, it is funny every time. The cheap camera does not capture the cleanness of the bass. It just sounds like truck rattle. Anyways enjoy.