ZED Audio

Well, there hasn't been very many threads on the Zed, so I just wanted to put one out. Seriously though, has anyone heard of any updates on any new lines. I know Steve was planning on something in the near future, and wanted to know if anyone has heard anything.

ive only ever really ran Rodek amps, ive had a couple 2150's to a couple 15''s and still have a 280 to a couple B-52 12''s and i also have a rodek cross over, now i got a 2300i and would like to know if i can run it down to 2ohm mono, ive had my 280 blow up at least 5 or 6 times and rebuilt, now it will run 2 ohm mono load all day, ive got 2 gauge wire going right to the board and dual fans on it, what an ugly looking beast now but i can hit 145 db on the termpro mic (pad) and ill pop any fuse smaller then 60amp, my cross over needs some work though, im only getting one channel out put, and im no longer in touch with the asian tech that had been servicing my amps before…

Just to let everyone know I sent in two amps to Zed to be repaired. It took over 2 months to get them back. They moved to a new location during that time. I did finally get them back this last week. They work like new now. I guess it was worth the wait. I still love the sound quality of their amplifiers. Just with the length of time with no contact with them I thought everyone else should know about it.

Did Zed audio move locations???

Merry Christmas to you all. My baby quit working after many great years of service. Does anyone know if the MAN will still service older amps? If so, is the process slow, fast, or does it just depend (I am sure they are busy around there) (can't go long without my music though)? I had an old A/D/S/ amp repaired a long time ago from a local shop and it didn't last. I would rather it get fixed by the maker. Thanks for any info.

i found a website that sold CDT amps for pretty much almost Zed prices... http://www.lightav.com/car/cdt/cdtamplifiers.html im debating on whether or not to get the SQA-1600 since there are no miniliths left... but im not sure since the amp would be a different color then my Zed Glads

I have a old school Planet audio 2250d zed board anyone want to buy it It's to big for what im doing now

hey guys......i am looking into a new sub setup.......going too take it back to JL i believe this time....first off i have 2 zed audio miniliths......the subs im interested in are the 12w7 or 13w7......... the 13w7 is a dual 1.5 vc sub and the 12w7 is a singl voice coil 3ohm sub. ............ how would u all reccomend me wiring these subs and about how much power would i be getting in you alls reccomendations......thanks and could u all map out the reccom-mended wiring for the strapping or whatever......thanks guys mini spec's: Typical Continuous Output power into1 ohm 600wx1 Typical Continuous Output Power into 2 ohm 400wx1 Typical Continuous Output Power into 4 ohm 200w…

Are there any updates on Steve's new line of amplifiers? It's March!

the title says it all. the funny thing is its used and priced more than it cost new. Z

I just read on another forum that ZED AUDIO is not going to continue to make car audio amplifiers. Any truth to this? If it is then maybe you better get what you can. I also know they make amps for CDT. Maybe they are going to continue to make them for other companies. Anyway if they quit all together I will be disappointed.

Anyone know anything about the new amps that Zeds coming out with?

I have read a million different posts on the various ways to set it....but ....I just wanted to get an idea where you guys have yours set at.... I am running a Pioneer 880prs 5 volt deck and the gain is currently straight up 12 O'clock position or halfway.... I havnt had it installed a week yet and barely spent any time in it yet....so its still in adjust phase but I at this moment can turn the deck up to max volume and its not distorting to me...so I am wondering if I can turn the gains any more or if I am already past where it should be at... I really hate amps not having clipping indicators ...it would be much easier to set with them

Please recommend a sub the minilith would like...that a single mini can power well......thanks...12 or 13" OUTSIDE of IMAGE DYNAMIC's IDMAX & JL AUDIO 12W6v2 thanks guys Going for a powerful LSQ setup GUYS....if that helps

Please do not place WTB topics in main section. We have a section made for that.

Ok so i figured this would probably be the most reasonable place to put this question. I have an Autotek 7100bts. Does anyone actually use these things with subwoofers or do people only use them for hi's? I was considering using it for a sub amp but everywhere i read people put them on 6x9s or on component sets. any info would be appreciated. Oh i know this is dumb question but what about putting to Icon D1s on it and running it at 4 ohms? wonder what would happen?

I am using a Dual 1 Ohm Fi Q that I want to wire up to a 2 Ohm load so I can have 1200 watts available, bridging two minilith. So I would wire in series. amp + to sub + amp - to sub - sub + to sub - However I am looking at the manual and it shows the two amps bridged and the picture show the negative terminals are to only connect to each other with the positives terminals going to the amp. amp + to sub amp - to slave amp - (interconnect ground) slave amp + to sub So how am I supposed to wire this? Am I to assume that since it is bridged, that the slave amp + is now the - and hook it up that way? Thanks for the help!

Is it possible there will be a presale or early buy in on the new amps? does anyone have any information? thanks Z

I installed it today and well I am a little suprised how much I had to turn the gain up... I have an Eclipse 8 volt deck and I figured I would leave the amp all the way down...well that was wrong...I had to move it about 1/4 to get any volume..... With gain set to 8volts I could turn the volume all the way to 80 on the deck and it was still rather low... on a side note ...one of the channels is blown so I am going to have to pay to have it fixed or get the seller to take it back..I just got it last Monday... but anyhow....I was expecting to not have to touch the gain with the 8volts deck...thats really the only reason I have the deck.... was I crazy? ....right now I hav…

hi everyone i recently picked up a crunch ca250...it looks like it is zed made but im not really sure,,anybody know the specs on it??its also still got the hi level wires with it!!!havent seen one on ebay for years!!i got a pic but cant post it on here for some reason...i must be doing something wrong!

I got my Zed Minilith on ebay if anyone is interested. http://cgi.ebay.com/ZED-AUDIO-MINILITH-AMP...1QQcmdZViewItem I just bought it, but I didnt realize how physically big it was till I opened the box, and it doesnt fit my install.

Man guys I finally finished my install.....got everything tuned up and its simply amazing.......people are swearin up and down I have hidden amps......my system sounds amazing .......everyone need these in there life.....CHECK these pics out.....my camera broke.....so I used my i930....camera phone....not the best picks but I think I get my point accross.......

does anyone have any information about the new line of amps? i am very interested..

I hate to start another topic but the stock topic is a month old and nobody has replied to my email or the post on "stock" so,..whats left? I need to know... Mike

What's the best ZED subwoofer made?