ZED Audio

Please check out the new products from ZED this year! We finally have some excellent photos of their products to show the world. As always, these are all available for purchase in our always growing online store... http://www.soundsolutionsaudio.com/store Draconia - II Leviathan - II

The good news is that our new amplifiers are due foir release mid August, 2009. For those of you who require more information, please email us at [email protected] and we will send this to you Stephen Mantz Zed Audio

I spoke with Sir Stephen Mantz and the new domain name for the ZED Audio website is: www.zedaudiocorp.com or www.zedamps.com or www.zedaudioamps.com. All three are the same site as before. I believe there is a new one in the works though.

Hey guys.....how do you think (((2)Mini's Strapped to W7 or (1)Deuce))) would play out...being that the W7 is single 3 ohm sub? Wich way is going to sound better....and be most efficient....I already have the mini's and was thinking about changing those for the deuce.....OR may be some sub recommendations for the 2 MINIs....I wanted to run one moster...sub....thanks

Man guys I finally finished my install.....got everything tuned up and its simply amazing.......people are swearin up and down I have hidden amps......my system sounds amazing .......everyone need these in there life.....CHECK these pics out.....my camera broke.....so I used my i930....camera phone....not the best picks but I think I get my point accross.......

Found this link, and I am trying to find out if this is the guy that used to work for Mr Mantz. http://stores.ebay.com/Audio-Clinic

I have an old Sweet Poison A5000+. Unfortunately it has been painted, so I have no clue which control is which. Does anyone know where to find a manual, usable photo, or able to explain what's what? Thanks

http://ampguts.realmofexcursion.com/Cadence_A7000+/ I picked up a couple of these. Are these true Zed amplifiers?......there is several stories about there being some sort of middle man that produced to many and cadence did not want them or something....just looking for some facts the ones I have do not have the plexi bottom but do have the a7000+ stickers on them.

I usually hang around phoenix phorum. I have an account here and since i just ordered some stuff I thought I would pose a question to someone who may actually be able to answer it correctly :-) I'm getting rid of a few things and posted up my USA 2150. Almost immediately the thread went south with someone wanting to know how this amp could possibly have these ratings with only a 35 amp fuse. Of course my reply, which may shock some of you was " If you run anything other than 4 ohm stereo pop in a 50 amp fuse just like hifonics" . Is this the right answer? OR ...Can the USA 2150 do rated power with a 35 amp fuse? Now for amp porn....

As far as I know the remaining ZED amps are: Deuce: 0 Gladius: 0 Minilith: 0 Draconia: 0

has anyone encounter leviathan and kronos issues? the amp will protect and pop noise from the time you open you headunit it won't go back to normal unless you turn it off and on again. the other thing is when you go full active. theres a noise coming out from the speakers. i tested all my purchase amp and all 10 of them has the same issues. maybe some advice on what to do or what ae the remedy on this problem. many thanks

I will be installing an Ulysses amp in my car this spring and then maybe replacing it with an ESX 60.4. I convinced my brother to go with ESX amps the old zed ones. Hopefully he will now see how good and powerful they are. I'm going to start him off with a 175.2 and if that is not enough I'm expecting a 275.2 to arrive soon. Mind you I don't really want to give him either of them yet he is my brother.... Does anyone else have any old zed in their cars? Currently I have a hifonics Gemini vii doing my entire system and it's pretty damn good. I'm almost totally satisfied with it. Just no real earthshattering bass yet with 4 8's it's good for now. L.

Really the price per watt of these held me back for a while (that and the Crown 6K that I picked up last year), but I've gotta say, since these came out I've spent more in repairs and blowing up crappy chinese and Korean amps than these ended up costing me. I have still to do more testing, but initial impressions are "run don't walk!" and get you some of these. If you're wanting 1000W range they're worth the extra cost for the crossover and EQ options, and if you want more power, they're worth the reliability. I haven't had a far East built amp >1200W last me more than 6 or 7 months yet.

I have a dealer news letter from Ian Castell dated Feb.9 1993 talking VERY Excitedly about some of the New Series VIII products to newly be launched. Lastly listed is "NEW DDAP processor-AURORA VIII launches a new era in automotive sound recreation. Incorperated in a 3 piece design (din size,dash mounted menu driven controller, and trunk mounted central processor unit and power supply) are Two equalizers (one parametric, one graphic) a totally variable 6 way electronic crossover, preset and customizable surround sound fields and delays, compensation for automotive speaker time smears by deploying digital time alignment, and built in noise gate technology. BEST of all Sug…

Anyone members interested in a June 2011 group purchase so We can get a discount on some Awesome products? I personally want to get a RA for the daily driver. I have a couple fellow audiophiles that have bought them & said the difference in fa nominal. After speaking with Steve about it I'm ready. "RA is a dedicated sub woofer control preamplifier. It interfaces between the signal source and the amplifier. There are four circuit blocks within RA, the low pass crossover, the sub-harmonic synthesizer, the compressor and the final gain stage. Specifications -Stereo input to mono output -24dB per octave Linkwitz Riley Low Pass crossover. -Twin band Sub-Harmonic Synthesize…

I bought one...its a little rough but is supposed to do 200x2 @ @ohms...400x1 ....pretty small....anyone use them? I am also looking at a NAK PA502 50x2 .....are these ZED NAK's better than or same as all the rest of the ZED made stuff? I know damn near for a fact that the Planet Audio amp by Zed was better than the US Acoustics I once had...... anyhow... I got some Zeds again...

I have this amp and it says 600 watts @ 4 ohms.I know it has more power than this I just dont know how much. If anyone knows the specs on this amp it would be helpful. What ohms is it stable to? What should I fuse this amp at since it has no fuse on it? Does it have an unregulated power supply? Class ? It is an oldschool amp but I would like to run it, just need some info. It was made by ZED audio . I have searched the internet but found limited info. Any help would be appreciated.

hey guys! new to forum but need some help I have an Autotek 7600 bts grey body and blue label amplifier. I had to have blown something inside this thing because evry time i put in a fuse it blows it. It is more like a dead short. I have had this amp for a long time and absolutely love it and dont really want to throw it in the grave yard. do you guys know maybe what could be wrong with it? Also do you guys know of anyone who would still want to fix this thing. any help would be greatly appreciated. thanks T

I have a 7300. And was wondering if anyone has any information on what's needed to get it to run a 1 ohm load.

Just wondering when the new amps are scheduled to come out, and when the if you have any progress on the tube amps.

I have an Autotek 7100 BTS made by ZED Audio and I was wondering if anyone knew if it is 2 or even 1 ohm stable when bridged.

Any new news on the tube amps, or x/overs. Oh man, I am so glad to see some quality equipment again, instead of nothing but bling.

I am using a Dual 1 Ohm Fi Q that I want to wire up to a 2 Ohm load so I can have 1200 watts available, bridging two minilith. So I would wire in series. amp + to sub + amp - to sub - sub + to sub - However I am looking at the manual and it shows the two amps bridged and the picture show the negative terminals are to only connect to each other with the positives terminals going to the amp. amp + to sub amp - to slave amp - (interconnect ground) slave amp + to sub So how am I supposed to wire this? Am I to assume that since it is bridged, that the slave amp + is now the - and hook it up that way? Thanks for the help!

I bought a leviathan on the 30th of last month, so it's been 14 days. what kind of wait time is there for them to ship the amp? Not in a big hurry, just curious.

Hey guys, I am new to this game and am starting to build my first system. From everything I have read I know I will buying Zed amps for my speakers and subs. My question is how much of an upgrade is the Burr Brown IC's, and is it worth it. All I know is that Burr Brown makes some really good IC's for audio components. Thanks, Arvind