SPL & SQ / Fabrication

hey im about to put 4 15 in a acura integra and need help building a wall

I am getting two Maw-15's and I was wanting to put them in a Ported Enclosure tuned to 30hz. But I drive a 1996 Ford Taurus and I'm worried I will come up a little short on Trunk Space. Any Ideas for the box Or do those subs sound good enough in a Sealed Enclosure? Thanks In Advance Guys. ~MadroX

I'm making a box and the port needs to turn. is it pretty simple like so... thanks...

i got a box that is 40x32x17 and trying to tune it to 32hz can someone help me find how big i need the port hole

i compete in 2 different Forums http://tbp.20m.com/ and http://soundandimage.20m.com/ i have i copied this from e-mail with Team SoundStream: When you decide to compete in a much broader area maybe we can discuss the possibility of a sponsorship. But as long as you keep your competition to a local area then there isn

Hey guys, I have 2 Older model Audiobahn Immortals (not the flamed out crap, and I got a good deal so dont rip on me please). I hit 140.8 legal on the TL with one in the trunk in a small box firing up in my civic, and want to put both in my backseat and make a temporary wall for a comp coming in a couple weeks, doesn't have to be perfect, but any pointers? People around here don't know there chit so I want to show people what a loud car is compared to some of the retards around here. Ill try and get some pics up but wondered if anyone could help at all. Thanks guys. Andrew

I'm looking to build a nice ported box for my L7 and make it loud. Problem is I really don't know much about ported boxes or the tricks to making a good SPL box. Kicker reccomends between 1.75 and 3.25 cu ft ported, but no tuning frequencys. The box will be sitting in the back seat of my 1990 extended cab Silverado. What would be differences between a round port and slot port, and what would be an optimal Frequency to tune it at. thanks for any advice, hopefully I can pull my ol' truck into s comp and put up some decent numbers

Do I fire my sub towards my trunk lid or into my vehicle? I have asked several people and now I'm going to ask the proz.....which way would yeild the better sound? I head that on paper it should be the same? Could you guys tell me why i should do either or? PLEASE - THANKS

HEY JUST WONDERING WAT KIND OF NUMBERS I WILL BE LOOKING AT WITH 4 15' DB DRIVE IN A WALL POWERED BY A MASSIVE AMP IN A 95 INTEGRA

all 1st time db drag/bass race just $5 per class T-Rex Audio 1324 Stratford Ave Stratford CT 06615 203-378-8377

So I'm taking my setup to a 1x event in timmonsville sc. I'll finally be getting metered on a t/l, but I'm wondering what I should bring with me, and if anyone has any tips. There are 2 classes they said I could compete in, truck/suv or something else like extreme personal or something like that. I don't know what would be better, or if it makes much of a difference because like I said, it's my first competition. I've already been told not to do anything to drain the batteries before getting metered, don't know how sound that is or not... Just wondering if there's anything I should know before driving 70+ miles away tomarrow moring. ;D Thanks.

i need to finish out the boxx and wall off the open side where the batterys go

well I have seen this on ROE in some of the vids is there anyone who can hook me up with this for a comp comeing up at the end of this week would like to use it for steet beats and does anyone know what freq. it is at. thanks P.S. if this is in the wrong section sorry.

Alright, I know how all you guys are happy to help people with set-ups and stuff. So I got one for ya. MY brother was paralyzed sometime around birth. So he is confined to a wheel-chair. He rides around in a big-honkin van. He loves car audio and has always been interested in what other people have. Anyway his birthday is coming up soon and I was wondering if you guys could just put your heads together and help me figure out how and where to put a system in his van. I will have pictures soon. Later Today. It's a '91 Chevy Van with the back seat cut out so he can drive his wheel-chair into it. Anyway I have to go put a water pump in. Thanks in advance for all your help and…

SO I am finally looking to replace my factory starting battery and I am looking at a couple different options. THe Powermaster 2400 or 2700 Kinetik HC2000 Tsunami/Yellowtop (not really looking at this option just put it here) NSB 90 Stinger 1000 (their newer line) Just looking for suggestions. My budget for battery would like to be less than 200 if used or 250 or less new.

ok so between my 2 15's im going to have about 400 square inches of port area, and i need to know if figuring out tuning frequency is the same as like a round or slot port. or if 400 is too much lemme know. i have figured 355 per sub so 2/3rds of that is about 220 per sub. but the box is going to be aboue 3.5-3.8 cubes per sub and i would like it to be tuned to around 35 hz. but i have no idea how long i need to make the port or anything like that. so any tips or tricks are well appreciated.

i measured from the subs to where the mic go's and got 7' give or take an inch. so 7'x4=28' gives me the 1/4 wave devide 1131 the speed of sound by 28'= 40.39Hz so i port to 30.39Hz - with cabin gain should peek @ 40.39Hz but what about the ports fireing 90degrees out of faze, ??? subs are pointed forward into the back of the seat & the ports are fireing up along the back window line. i drive a 1988' Ford F-150 x-cab

i have a 1997 mercury mountaineer with 2 fi q18's DRUMMING~! they are powered by a t20001bd rockford. i am losing so much pressure out of the back glass do to flexing. do they make clamps for the back hatch to hold it down? its a daily box in now and will future be a crx style spl box. i currently have a 12 cube crx style box with 120 sq. inch of port. thanks for any and all help! Damon

Hello, I have a box designed and it currently has 4.6 cubic feet net internal volume after wall thickness/drivers/bracing. I would like to port this box and the port face is 13.5hx4w. What length would the port need to be to tune the box to 33hz and 35hz? Also what would the lenght need to be if the port face was 13.5hx4.5w? Thanks

I have been trying to decide whether or not to go smaller with my box build. All of my buddies that are a little old school when it comes to spl say big boxes are the way to go... But when talking to people I compete with such as TJ in his Yugo doing 52's he says go smaller. My current box is 3.68 cubic feet after driver displacement, but not port displacement. 69 sq inches of port tuned to 42 hz. The woofers are two TC sounds OEM 10". I am thinking of shrinking down to a triple front baffled, double walled 2.4 cubic feet gross, and using 2 4" aero-ports and slightly raising my tuning as the change in box orientation changed my resonant, and building the wall (in the trun…

alright. ive got the dimensions. i have 2 options of building this. its kind of going to be trial and error until i find the right height i want the desk to be, but here it goes. the box needs to be 4.5 cubes each (2 seperate boxes) and tuning...im guessing like 20ish or 24hz or something? 95% of the time its for rap music. once in a blue moon i may watch a movie on it. but for the most part, i want it to sound best on rap music. the dimensions im working with are 39" x 37" (width and length) using those 2 dimensions, i need to see how high it will be to make 4.5 cubes after determining the tuning and port length, etc. if i like the height, ill build the box using that wi…

hey i have a 02 ram single cab and just took out my center seat out in order to create more clearance and air flow for a sub/box. my question is; what is the best placement for my sub for sq? this is what it looks like w/o the center seat: and another shot: http://www.dupontregistry.com/Celebritycar...C-9363FD33193B} thx in advance

hey, im going to be buying a VW rabbit in a couple months cause i got accepted to my #1 choice university!!!! i got a scholarship so now i have about 10 grand saved up plus i'll take out a student loan and im gettin paid to go to school (1600 bucks a month). I currently have a Fi Q18 tuned to 28-30 hz, and i hit 145.2 on my first try with some music. Im looking for some help on deciding what the best setup would be for a hatchback. Im thinking 2 12" BTLs with about 5000 watts. im really excited to get this project goin. my goal is to break the 150 mark but music is what the stereo will play, no farting. any help is appreciated!!!! thanks

looking for some help with the enclosure i am planning to build in the rear seat of my accord. it is not going to be a wall but a ported box reall. i was just wondering how to face the subs and ports. like subs up ports forward and that kinda junk. well i guess i should have stated what im looking for. im looking for a loud daily driver.