Photography

The box is 2.6 cuft @ 39 Hz with 16 square inches of port per cube. Need to build another so I can reach across the truck to roll down the window.. lol (also i think i will tune the next one around 33 hz)

Went to go take a tour of some yachts my mom works on today and while driving past the boats i saw this... Just another random spotting of Sundown while out and about!

my new box working on for fiance`s brothers buick la`sabre it will be tuned to 33hz when finished 2.68 ft3 befor driver displacment subs and ports will face up

I'll start off by saying I had a shop do this for me. I usually don't shy away from installs but my wife works when I don't and I watch my 14 month old when she works so that gives me almost no time to do this. The car is a 1998 m3 with the stock HK system and factory amp. The midranges had been replaced by the PO with some 3.5" infinity’s. After listening to a set of HSK 3 ways and looking at the price I decided to go with the cheaper ESK 3 ways. The 163L comes with a higher excursion 6.5" (Higher than their normal ESK line), a 4" mid range and 3/4" tweeter. Linky to Hertz, which would replace the factory 5.25 in the kick, 3" infinity and factory 1" in the door…

A few years ago we had just a ton of beautiful sunrises. I was blown away, so I started bringing my camera and taking pictures. These are overlooking one of my ponds. The first one is the pone in the daylight, so you have a reference:

the best sub ever and the weirdest box I've ever owned, I think I got screwed, but it still sounds good, I think that has more to do with the DCON.

I started on a new wall for my z car today, I got a decent amount of progress done, and hope to finish tomorrow if the weather is right. The subs are Lanzar optidrive 1532 15" subs. This wall is 8.3 cubes with 120 inches of port, tuned to 39 hz.. The box hopefulyly will peak at 44-45 hz. The last time I checked my RF was 43 hz. The whole box will be 1.5 inches thick when completed.

Got bored.. lol

Went to go see a van a dealer was building @ Kreepn Kustoms in AZ 6 15D2 SSA ICONs 2 Lanzar 4000Ds EA 300 AMP alt the list goes on. any pics are towards the bottom of the batch. Here's some pics of the show. Some nice cars there.

when i'm not driving around town...

Sorry probably kind of misleading i know. I picked up some new 22s today for truck. 305/45/20

Im looking for a new point and shoot camera that will also take vids but primarly for still photos wondering what you guys had for ideas. Was looking at the nikon S4000 and S6000 trying to stay under $300. What do you think i should look at

A story comes with this picture. I went on vacation with my family to Maine and it rained from the moment we landed to the moment we left EXCEPT for the 5 hours we went out on this old sail boat. While out there I shot this image of one of the other boat sailing. Enjoy. Andrew

Just had these 22" wheels installed this morning. My selection was a bit limited but I got a really good deal on them. Overall, I'm happy with my purchase. Nice upgrade from the stock wheels. Pictures are from my iPhone but they came out alright.

Received my amplifier today, well actually three. Soundstream RUB1.2500D Soundstream RUB2.600 Soundstream RUB2.250 Here's the internal shots of the 2500D, what else shares this board? Large size: http://sites.google.com/site/b34tbox/amp_inside2.jpg

Well here is what ive been working on the past few months. Finally got all the body work done and had the car painted. Ive got most of the stereo going and just have to figure out what to do on the subwoofer. I dont want to add to much weight to the car. But im working with a MTX 81000D and looking to run either one big 12" or 2 10"s i do believe. I really dont want to spend more than $150 on the subs either..... Any input there wouls be greatly appreciated...... Pictures will be up in just a minute...

Flickr: CranberryYumYum's Photostream next month thirty more.. weird how i can only upload 100mb at a time

this is my 87 gt convertible paint has been refreshed, got new headlights and markers lights put in,. new tires, new valves seals, new tranny. getting a new top on it should be done next week. has 106k miles on it but doesnt run like it does! lol Runs awesome!

some of my setups.... 4 sundown e8's of 1.6k RMS one 2008 15" RE MX of 2krms. WAS MURDER! in 5ft^3 @ 32hz T3 T.S.S. 10" just a few from the past 6 months And my current setup: tc9 based 12" driver. dc lvl 5 coil FTW! FS consists of set of cdt COM-626's getting ~115 rms each Kenwood KDC x994 HU amps tucked under pic of the driver

Well, this came in today. Thought I'd share a few pics of it. My sister ordered this for her '02 Durango. She currently has a Kenwood KDC-X493 HU running to a Hifonics ZXi8006. PG RSD 6.5's in the front and JBL 6.5's in the back doors and a Pyle Red Label 12" Square sub that her ex had given her a few years ago. It should be a great upgrade to this from that Pyle POS and it should be at home on the ~300wrms @ 2 ohms the Hifonics is rated for. We'll be building a 2-2.25cuft enclosure for it as soon as I get my vehicles done this spring.

Here's my wall in my Z, info is in my sig below. A rough look, but serves the purpose. I kinda want to put suede over her. The port beats up on passengers pretty well, since it is so close to the headrest.

Ok this has been my goal for a decent amount of time and I marked 2010 as my start date for accomplishing this goal. (4) Fi BTL 18's triple stacked (Basically completed) (10) Deka intimidators (2) stetsom 10kd's (3) DC Alts (300 amps) (14) AA carbons (2) AQ mids amps Kenwood Exceleon x693 A boat load of sound deadener Hmmmmmmmmm I think I want a 16v system but we will see. Ok I have to admit it looks better with the rims, but they were only 20's anyway (outside pics) My personal favorite pic. It looks like my truck is challenging ALL comers. lol still doing some uploading and editing, I want to get this stuff off of my hard drive space and actually use them. lol