Photography

Just some pictures of my car where she has been, and what I'm doing now..... When i first had her painted i have had this car since i was 17 had a 307 in it when i got it... First time i got back from iraq took it out put a 455 in it. in 2005

Sorry probably kind of misleading i know. I picked up some new 22s today for truck. 305/45/20

the best sub ever and the weirdest box I've ever owned, I think I got screwed, but it still sounds good, I think that has more to do with the DCON.

The box is 2.6 cuft @ 39 Hz with 16 square inches of port per cube. Need to build another so I can reach across the truck to roll down the window.. lol (also i think i will tune the next one around 33 hz)

Im looking for a new point and shoot camera that will also take vids but primarly for still photos wondering what you guys had for ideas. Was looking at the nikon S4000 and S6000 trying to stay under $300. What do you think i should look at

Just had these 22" wheels installed this morning. My selection was a bit limited but I got a really good deal on them. Overall, I'm happy with my purchase. Nice upgrade from the stock wheels. Pictures are from my iPhone but they came out alright.

I started on a new wall for my z car today, I got a decent amount of progress done, and hope to finish tomorrow if the weather is right. The subs are Lanzar optidrive 1532 15" subs. This wall is 8.3 cubes with 120 inches of port, tuned to 39 hz.. The box hopefulyly will peak at 44-45 hz. The last time I checked my RF was 43 hz. The whole box will be 1.5 inches thick when completed.

A story comes with this picture. I went on vacation with my family to Maine and it rained from the moment we landed to the moment we left EXCEPT for the 5 hours we went out on this old sail boat. While out there I shot this image of one of the other boat sailing. Enjoy. Andrew

when i'm not driving around town...

Got bored.. lol

Flickr: CranberryYumYum's Photostream next month thirty more.. weird how i can only upload 100mb at a time

Well here is what ive been working on the past few months. Finally got all the body work done and had the car painted. Ive got most of the stereo going and just have to figure out what to do on the subwoofer. I dont want to add to much weight to the car. But im working with a MTX 81000D and looking to run either one big 12" or 2 10"s i do believe. I really dont want to spend more than $150 on the subs either..... Any input there wouls be greatly appreciated...... Pictures will be up in just a minute...

some of my setups.... 4 sundown e8's of 1.6k RMS one 2008 15" RE MX of 2krms. WAS MURDER! in 5ft^3 @ 32hz T3 T.S.S. 10" just a few from the past 6 months And my current setup: tc9 based 12" driver. dc lvl 5 coil FTW! FS consists of set of cdt COM-626's getting ~115 rms each Kenwood KDC x994 HU amps tucked under pic of the driver

Here's my wall in my Z, info is in my sig below. A rough look, but serves the purpose. I kinda want to put suede over her. The port beats up on passengers pretty well, since it is so close to the headrest.

Here's my 2003 acura tl mods are Stock lip kit 19x9 Work Varianza fs2 +30 rear offset +43 front offset Function & Form Type 2 Coilovers Comptech Icebox Intake Future mods are 6 speed swap Full interior makeover...thinking of going red and black.. work meister wheels and maybe comptech supercharger. No pics of the system since the car is still @ the shop under the knife =( System consists of Kenwood DNX9140 Rockford 3Sixty.2 Peerless SLS 8(glassed in the doors) Tang Bang Bamboo W3 Full rangers(in the a pillar) JL Audio HD600/4(300 x 2 bridged to the sls 8's MB Quart DSC280(for the fullrangers) 2 12" XCONS in 4.2 Cubes tuned to 30hz Sundown 3000 Stock 120amp…

Well, this came in today. Thought I'd share a few pics of it. My sister ordered this for her '02 Durango. She currently has a Kenwood KDC-X493 HU running to a Hifonics ZXi8006. PG RSD 6.5's in the front and JBL 6.5's in the back doors and a Pyle Red Label 12" Square sub that her ex had given her a few years ago. It should be a great upgrade to this from that Pyle POS and it should be at home on the ~300wrms @ 2 ohms the Hifonics is rated for. We'll be building a 2-2.25cuft enclosure for it as soon as I get my vehicles done this spring.

My wife and I drove to Pheonix this past Sunday to pick up a rescue Rottweiler Puppy. (UPDATE 20100819 She is actually Shepard Lab mix not rott. Finally updating this) She was estimated at 9 weeks old and if her size now is any indication she is going to be a monster. I was able to pass her as a Labrador/German Shepard mix. On to the Pics!!!!!!!!!!!!!!!!

I can not wait!!!!!!!!!

Hey- Just wanted to share the temporary amp rack I made just until I get my next set up. Came out pretty good considering I really suck at wood work lol. Also as a side note, I decided to use my dmm to see how many watts my amp was putting out because I set it by ear a long time ago. My Punch 500-2 is somehow outputting ~1000 watts, which would explain the terrible efficiency and voltage drop. Sorry for the poor quality, my camera was dead at the time. I should have taken a few other shots too, but its basically a simple wedge design.

all bloodlines welcome. Local photographer Mac Shot 20 will be setting up shop for photo shoots, if you bring a dog out please bring a kennel

Here's just a few pictures of my 1986 GMC S15 ext cab. i've taken over the time i've owned it. Hope you guys enjoy em (sorry if they are not all the same size.) "Mix of old & new photos." Believe it or not.. i found this truck ina shop in Detroit Michigan and it was sitting for 10 years!!! had an inch of dust on it! I've added a few things Thanks for looking!

So, I got bored and decided to make a lamp out of some old speaker parts I had sitting around. The components used are the soft parts from an RE MT that Nikuk mailed to me out of the blue nearly 5 years ago, and a basket and vc former from a Next 6.5" speaker. I used the basket as a base for the lamp and epoxy'd it to the bottom of the former of the MT softparts, which serves as the main body of the lamp. I used the former from the Next speaker to fill the gap between the MT dustcap and the bottom of the lamp fixture. The end result; Still need to decide what I want to do for a lamp shade. Thought about trying to make one out of speakers grills or the like. But I fi…

my buddy havin two of my DD1515 on a Ground Zero gzpa 2.3000d....some shakes

Ok this has been my goal for a decent amount of time and I marked 2010 as my start date for accomplishing this goal. (4) Fi BTL 18's triple stacked (Basically completed) (10) Deka intimidators (2) stetsom 10kd's (3) DC Alts (300 amps) (14) AA carbons (2) AQ mids amps Kenwood Exceleon x693 A boat load of sound deadener Hmmmmmmmmm I think I want a 16v system but we will see. Ok I have to admit it looks better with the rims, but they were only 20's anyway (outside pics) My personal favorite pic. It looks like my truck is challenging ALL comers. lol still doing some uploading and editing, I want to get this stuff off of my hard drive space and actually use them. lol