Photography

Here are some pics of the show. First my ride soaking up the sun I saw this: Packing this: Yeah the pic sucked, but the ride drew a crowd everytime it was fired up. Then I saw this: Inside I found this: No opinion as I didn't get to hear it. :\ Right next to it I found this: Clean install inside: Upclose of the drivers: Up next, this: Inside I found this: All being powered by this: More on the way.

Tell me what you guys think. Interior is black leather and suede. Ill post more pics soon.

So as some people know, my other car was totaled out due to my accident. I finally got all my insurance money and money from the party at fault. So I picked up a 2006 Cadillac DTS and put 22s on it today. Everything is fully paid off on the vehicle and wheels. Anyway, on to the part everyone wants to see. Pics. I just have one pic for now. Snapped it as I was walking into my apartment. I'll grab a few more shots of the interior in a bit. I plan on putting all my previous equipment in this car. I just need to find enough time off work to actually install the gear. From the looks of it, the wiring is going to be a pain in the ass but I'll have to see.

Damn! It was a good show. It was awesome chatting it up with all you guys. No trophies for me. :/ I was bestowed the honorary "Rocked the fhawk out" by the Oklahoma crew. They don't call them guys OK for nothing. Thanks fellas. I did get some great tuning tips from one of the Houston Boys, Chad. Awesome dude, thanks for the tips. Well I'm gonna try to keep this thread alive by posting some pics. So here goes. Chad's (southside) Acura out to dominate the world of SQ Nice and clean trunk install. I didn't get a chance to listen this time around, but there is no doubt this is one nice sounding car. I came across this sinister Tundra done up by the crew at Mobile Toys…

Mom got her a '69 camaro the other week as a toy/project Just a base model 307, holley carb, edelbrock aluminum intake, all new exhaust minus the manifolds, 10 bolt rear end, muncie 4 speed. Plans are to do a LS swap, disc conversion, possibly a/c and restore it little by little.

here's pix of the mids. i'll get pix of the work in progress later.

http://www.caraudio.com/vb/showthread.php?t=70132 - Steve

just uploaded 140 pics to the gallery. DUB show at the Phoenix convention center I went too last weekend. check the link. http://www.soundsolutionsaudio.com/forum/i...q=sc&cat=11 here's a few pics of what is in there.

Well here is my dual 12inch box i built. Love the box design and everything came out really clean! (Sorry about quality of pics taken with camcorder SONY HD'S suck for pics!) I decided not to paint,vinly or carpet wanted to do something a little different stain and varnish the box like piece of furniture type of look. The results i gathered where alright mdf didnt like to soak that much stain and varnish up easy. MDF isnt wood so you wont get the best results. (Miniwax Products) 320 sand paper before any layers Stain-1 Layer Sanding Sealer-1Layer Varnish-5layers(First 2layers of varnish was sanded with 320grit , 3rd and 4th 600grit) The look of the box came out little da…

well after seeing Sec's explorer with his recent smoked tails and having someone mention the use of VHT nite shade got me into thinking. with as cheap as people say it is i figured well why not take a shot at it? plus, i really really needed something to do! so i went on for a few days and researched, researched, and well researched even more. a lot of users on other forums have used VHT nite shade with good results. so finding out that a 7oz can of the stuff was only 9 bucks and usually 2 cans is what is needed for most tail lights so i went ahead and ordered 3 just to be safe. also most people say that the tinting process takes usually 4-6 hours, most of which is waitin…

Cant wait to get these installed and break stuff.

Received my amplifier today, well actually three. Soundstream RUB1.2500D Soundstream RUB2.600 Soundstream RUB2.250 Here's the internal shots of the 2500D, what else shares this board? Large size: http://sites.google.com/site/b34tbox/amp_inside2.jpg

As I mentioned, I wanted to created a thread for photography/videography for members to post whatever they want relating to the subject... i.e. lenses, camera bodies, accessories, software and general questions and opinions on the matter. I'll start off with my new edition or new upgrade rather: Sony a7m2

Yes! they came...

Thouggt maybe we could get a funny install pic thread. Lol. I will post the first... guu came to put air in his tires at the shop i work at and i asked if i could take a pic becaude it was "soo cool".

i could have swore i made a thread on here to post pics of all my new updates but i guess not.. anyways here is what i did to her last night.... Put on some cab lights off a 2012 f250 and painted the stars in the center of my rims from black to red... Also swapped out my pillar gauge lights from ugly dim green to bright white LEDs..

this should give you pro guys a real laugh im always on a budget because tuition is tooo damn high! but i do what i can.... disclaimer: this is by no means permanent as nothing in this hobby is, and this car might last another year or 2 if im lucky the box is screwed into the fold down part of the backseat has two lanzar opti 1232D on a brz1200 @ 2ohm the box is a mtx side firing port prefab i got for free (its decent but tuned around 42hz) other side of the backseat down this is where all the amps are secured in the trunk is two digital designs 2500 on a brz1200 @ 2ohm and yes thats a strip or 2 of knoknoise deadener on the box why not ri…

After a month of drivin around with these speakers sitting on the floor, i finally got around to glassing my Rainbows in. This is what ive done tonite so far: Heres a pic of what it used to look like: A little before shot: All the tape and stuff: And done for the night leting it dry (do i need another layer?): Now my only problem was the taping... i didnt put foil and stuff underthe tape. I hope everythings okay underneath the tape but overall looks okay to me. will keep u updated!

SLP SPL anybody? Well im not going to say too much about it but i purchased a 00 SS camaro today. build log to come as things start being purchased. Car is loaded with goodies LS6 intake with cold air 3" cowl hood most of the suspension already upgraded flowmaster exhaust long tube headers yada yada yada. Car has a kazillion miles and the paint on the back bumper is chipped/peeling I go pick it up on thursday. ill have more pics then.

My first box REDEEMER!!! aite i started yesterday, almost finished today. day 1: first time using one of these things.... its scary man, cut a piece of brick up real good. my wood frame somewhat put together Day 2: LOL my ghetto circle almost art deco you wanna see the butt... or the face? (literally) thats all for now...

Just some Random pics of my Comcast Xfinity work truck ... enjoy ...

I am currently building a wall for a customer at the shop that is going to house a XXX 18 with two sealed 12" re series woofers for mid bass (customer insisted this not me). Here are some pictures of my progress. Net volume is 16 cubic feet with 160 square inches of port. Amplifiers consist of a USamps MD3D for the 18 an MD1D for both 12" woofers Elecitrical is lacking (KHC2400/1800/600) - customer ran out of money though, After all the other items he purchased for the install it came out to be over 17000 dollars.

Boxes. Thanks to the border guys for tearing things apart. Now you know what your taxes go towards. Just another shot. This is what really pisses me off. They open the box, that

Yes I'm bored. LOL I was looking at my photobucket and really missing having some sort of fast car or hot rod. I figured I would share some pics of my cars over the last 10 years and show pics of my friends insane cars too. This car started my passion for Mustangs. I bought this car off the showroom floor and ended up making it a launching machine at the track. haha. 2003 Saleen S281 Paint matched my garage My 03 F150 with my Mustang Traded it in on this SRT-10 Ram, Viper motor and I added a 175 shot of nitrous on it. Made 560rwhp on spray. It was bad ass! Then I bought this 89 Saleen. This was my favorite and I'm still sick I sold it, 80k original miles, built…

Well guys, my friend and I spent 9 - 10 hours fixing my baby today. We put on headers and high-flow cats, replaced the water pump, optispark, spark plug wires, and spark plugs, deleted the air pump, and did an oil change. I know I could never show myself around here again if I didn't get pics so here ya go: Some random parts: The headers, cats, and gaskets: Taking the old crap off: Is it just me or does this look a lot like blood? The underside: Another view of the underside: All the old stuff off of the block: Exhaust ports: The new water pump and optispark gaskets installed: That wonderful piss-yellow do hickey: Headers and spark plug wires in place: Bottom …