Photography

Now that i see it in daylight it's not nearly as bad as i had thought, so shanna gets to live. Just wish i could have seen the other car so they can't claim 8,000,000 things that wasn't her fault

http://www.canadiancaraudio.com/ubb/ultima...=3;t=010212;p=7 Giving me some crazy ideas...

Recently, I damaged my rear bumper on top of Four Peaks, AZ. Which was naturally an excuse to get a new one That turned into "what else can I get done while it's in the shop". This is the after math: Trail Gear U-Bolt flip kit Doug Thorley Headers (o2 sim coming soon) And finally, the solution to my efff up.

I tried this at smd and i got ripped a new one...so i was outside of my house smoking a cigarette(wife thinks i quit) and i see a bum pushing a cart...so quickly i spot a prefab box...i call him over and ask him to show me the box...the box had an old skool rf 12" sub... Brand new man! Then he says i also have an amp...so he pulls it out the bottom of the cart and its a decent kenwood 2ch...THEN!....he say i also have a stereo...so he takes it out of his backpack its a new pioneer premier with ipod connection,bluetooth,4v output,and its in its box. All tested and works like new

Dont know where kicken' was but i went with my GF. PRetty good sized crowd. Pretty hihg numbers hit, Bass Race world champ for 140-149.9 was there with his van. Running a wall of MT's and MTX amps. Highest number i saw in qualifying was a 166.x in some blue van running memphis 15's or 18's. i didnt stay for the higher class competitions. I left after Street C. Treo's Demo truck was there, i was like a kid in a candy shop 4 15's, TV's glassed into the doors TV's in the fender wells, above the plate, sexyness. Two chittyest looking cars there was a pair of CRX's one running Street A and one Street B both louder than the winner of Street C one was running a pair of Solo…

FIgured if it can drive a decently clean 25wx2 its worth it for my componets, at least better than my stock HU drving them at an amazing 16 distorted watts maximum sorry it is so dark, my finger was coving the flash, lol.

I knew I couldn't mention I got new amps without pictures...so...here's what you get for now Well, here's the first sign that there's goodies inside: From Russia...with t00bz! Dem 'er some big 'uns. Comparison shot: Just 'cause I felt like it, a photo of the Rava being fixed...it's now done and looking purdy again... Where are the amps, you say? Hmm, will have to wait on pictures of those, along with the review... 'Tis all for now. Cheerio.

Yes, board in traffic.

http://www.youtube.com/watch?v=h0-46800xr4 my phone's camera is quite nice and it captures most of the tones correctly so make sure you are listening through a subwoofer. let me know what you guys think! i will try to make an excursion video later!

Just bored...and in need of speakers for my bedroom system...why not build something. Meet the future of the circular saw...for someone like me that's a lazy ass when it comes to cutting a straight line freehand, this is the ultimate way to get spoiled. Comes with a metal guide fence that the saw slides into. The blade isn't fixed, so it does take some getting used to, but unlike a fixed blade you can drop it in the middle of a piece and cut a perfect edge, every time. This and the lovely Makita compound miter are going to be getting some use tomorrow

he liked playing with a spare gasket i had lying around and looking at my 2007 surf calender and that is what i got for the girl for our 6month anaversery. Maximum blingage.

Seems like there is always something to work on.... This is my "new" Brute. yeah I've had 10 min of seat time on it.... yeah previous owner, an easy life on the farm eh? This is a pic of my Sportsman 400^^^ Had to weld on some more metal because the a arm got loose and "wallerred" a the mounting hole out. Using my little MIG, decided I didn't care to switch the flux core out and use gas. The original metal was also pretty thin so a constant weld was near impossible. Soon as I got that all done, went to replace the tie rods and found out the front right a arm is loose as hell too Just another day!

some fun little shots from yesterday

Bags are 50 kilo sacks baled in bundles.

First thing I see when getting out of the cab: Stupid art institute. I hate art, well at least the painting side. Here are the only cool views I found short of the ancient Chinese/Japanese artifacts which were so poorly lit, I could not photograph. And Finally, the game. NOTE to self, do not let girlfriend take pictures ever again. I don't know how, but I had her take some awesome shots of me infront of US Cellular Field, and they never made it to the memory card. I was repping the SSA shirt hardcore! See that red banner to the left and under the Pontiac billboard? THere's a new G6 in there and that banner reads, "hit it, win it." Nobody hit it. THE NUMB…

Hey, got these in yesterday, should have all of my wiring in soon. Dist. block, in-line fuse holder, fuse, 1/0 ring terminal, 2-5M rca's, 10' 4 ga wire, 8 ga terminal, 4 ga terminal. Anyone have any experience or know how the heck to get the wire to stay into this: Thanks, Ed

We had such a great time in port a thanx baby...and halloween was fun

ramos helped me with the floor molds, but by now he should be on his way to florida. I figure if they don't come out well i'll just redo them. The volume is a lot closer than it looks in the pic, but they are still a bit off. Oh well :-D

So I toyed around with the idea of getting an outlaw receiver, or one of their preamps or some other pre-amp amp combo and it started to look expensive. So I wound up buying a $3,000 receiver...but I only paid 1,000. Sweet, its upgradable via computer, it does more things that I'll ever figure out, it weighs 60 pounds, has two subwoofer outs, and got good reveiws (like that means anything). It might not do everything as well as components but its likely I just bought plenty of EQ, a decent amp, a preamp, a headphone amp (it has dolby headphone) and lots of buttons and lights. Okay that eliminated the adcom stuff I just bought but I might hold onto the amp to run a sub. …

Got this for my DX-28 and $100. Sweet deal here. Got this for $80 on Ebay to replace the DX-28. Next up, some Treos!!! And soon another MMATS D200HC, but of the polished variety, and a DD9515.

Few toy's I've been messing with these past few weeks. Poor little MOJO , all alone... R.I.P MOJO Feb 9th 2008 , and replacement is on the way. How it stacks up...Holds it own nicely between the big brothers. Uno, Dos, Tres, Cuatro, Cinco.......my my my..I've been busy.. Crappy photos, but thats what you get when your digital caml breaks and you use a cell phone camera , lol....... Got a 04-05 RE XXX 15" on the way as well....will have pics of it, soon as it arrives.

Iv had a few people ask for some pic's of my newest set-up. i finally decided to go with the 2009 15" kicker l7 in a 5.0 CF ported box and a kicker zx1500.1 so here are some pictures. enjoy!

It ain't the greatest of quality and it doesn't have sound. Need to do another vid because I couldn't get the roof flexing action like I wanted. Anyway here it is: http://realmofexcursion.com/videos/REAudio/sx18.4.wmv

ive been thinking about why i wanted a truck that gets 18mph, isnt even really quick, just funn on buttery roads because of the 4.10 locker in the rear, and worse of all is hard to make out in. Well getting her ready for prom i figured it out. I did a full detail exvept for tire stuff. Vacumed, Wax, armoralled the interior, wcrubbed every nook and cranny of the wheels, cleanned the windows inside and out, and to wax it i parked her under the tree in the front yard. Comming back from dinner i realized it, she looks so damn good to me in the cool light of sundown.