Photography

I know I have already posted up a few pics. But here is my ride with some better ones.

heres a short vid of my system in the GA. one atlas 15. sealed 2.5cf RE12.1 amp at 4ohms. not too bad, guessing somehwere in the low 130's on music maybe mid 130's on tone. i wanted to play a different song but the damn HU skips so i had to pick a different song.

Elderado and JimJ PM me your addy's and ill get them out as soon as i can scrape up the postage. Special Addition, only 2 out so far Around the "Type" you may want to put some black pen or just get an Exacto knife and cut out the paper. didnt have a coned 8 lying around so i grabbed a blown and deconed one.

Never got it to blow. It smoked a little but it never blew. I ran it at 4ohm and it would go for about 3seconds then pop the 15a breaker...i kept resetting it ant it never would blow. I didnt have acess to a 30a breaker. I wired it to 1ohm and it popped the breaker almost instantly. The coil still looked like this. This driver doenst look like it had a very tight gap but damn does it have some strong magnets. That is all.

here we go. First draft CMS system http://www.LaFountainDesign.com

///M5 told me to buy some new CD's...well I bought some. The pink floyd is actually for my dad and the ray charles for my mom (b-day presents, one of a few) but im going to open, rip them at a high bit rate and then make an exact back up copy first. The marley is all mine though. Here is the stash box i got in the bahamas, they sell these things all over the place in the straw market but i bought mine from the guys who make them...and no no "stash," just some money, old jewlry, class ring, and CPR/Life Guard certification. Here are a couple of pics from last years regional meet. And last but not least...some more stuff for my mom's 50th

the woofer: the tweeter: amp: a PAIR of AX TU-300C (photobucket is busted lol) should i use the CAL 25 ALK (metal) or the G (fabric) that comes with the Contour? gotta build some stuff for my doors now!!!

here's a teaser from the run sunday... remember, i'm 6'2".... the sissy bar is just as tall....these are ape hangers ++ wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

JL Audio XR 5.25 components. This is my first time haveing to make speaker rings for them to fit so i only got one door done today =\ o well its progress i guess. i had to remake the rings 2ce becuase of the way the door panel is curved and i didnt really wnat to cut the panel so here are a few pics from my day today. For the tweets, i just glued a peice of wood to the back of the pod as u can see in the pics and then screwd the mounting bracket for the tweet onto it. looks decent for my use and get the job done. http://s74.photobucket.com/albums/i267/haz...mgAnch=imgAnch1 http://s74.photobucket.com/albums/i267/haz...mgAnch=imgAnch2 http://s74.photobucket.com/albums/…

alternator

ive been working on this for a little while.... while waiting for subs to come in off back order... they finally came in and are installed... tell me what you think. and one it lit up hope u alls like... -AcId-

I got a member of Ridiculous C.C. to play a track of mine, "Infrasonic Bass" on his 6 Memphis 15s in a ported box. My camera doesn't do it justice because the woofers were really moving. uyhnhJwyBko

Heres some vids of our recent metering session in Hawaii enjoy and let me know what u think....

Well for now im gonna fix the flexi basket and if i ever have the money i may send it in to be made into an 18... soo here is what i did today. I would like to fix it to the point it wont need a support ring on it so i can put the gasket back on make it look brand new. I dont know how im going to do that because that will be one hell of a weld to get the broken spoke back to the basket.

Yo... So, received my Pioneer Premier P8DVD from Showrides on Friday, modified my truck dash on Saturday and installed... It looks pimpin... How it used to look... That "Dakota" slideout cup holder just so happened to be the EXACT size of a single DIN cage . Also, the dash is WIDE OPEN behind it! *p00f* Passenger side view! View from rear window... Few more shots! YESSSSSS!!!!!!!!!!!!!!!!! Pimpin, I love it! The P8DVD is a dead head, has RCA audio out that inputs into my 9835. All volume and processing is handled by my Alpine 9835. ABS will be used to fill gap on sides of the screen Comments? nG

Here i will add some pics i have taken, will update this topic sometimes. Here is first one:

Hey- Just wanted to share the temporary amp rack I made just until I get my next set up. Came out pretty good considering I really suck at wood work lol. Also as a side note, I decided to use my dmm to see how many watts my amp was putting out because I set it by ear a long time ago. My Punch 500-2 is somehow outputting ~1000 watts, which would explain the terrible efficiency and voltage drop. Sorry for the poor quality, my camera was dead at the time. I should have taken a few other shots too, but its basically a simple wedge design.

shane was here

couple new toys, I'm due for them. SBN setup.. dasalottabaffle (box isn't done yet)

And it has 8" of clearance too, too bad you cant go any larger than 10's with it. Basically it ended up that i would just go around tapping it with a hammer and saying "it could use some bracing here" untill no matter where you tap it you get a short, high tap, not a thud. cant really brace any better than that. its heavy as a Bizotch too for a 2cuft box, used almost an entire sheet of MDF Anyway, its on the smaller side for the speakers it was built for which are 2 Kicker Comp 10's but low end output should be made up for for the lower than reccomended tuning (about 32Hz uncorrected and 29-30 after end corrections) and they are slot loaded so im hoping that does…

Well this system is very basic and the upgrades are coming slowly. The hu is old but it works for now. The 4x6 plates are horrible and the MLI-65's are underway. The Hertz were okay and slammed pretty good especially with the new alt...but the BTL is much nicer. And the alt provides mucho voltage. Those are my first speaker boxes and carpet job ever. Two seperate boxes so it wasnt so heavy and awkward to do by myself. Had to do the round port with simple tuning to 33hz. I made them a touch too big but oh well. Still sounded ok to me. I wanted to cut out the back 4x6 grill on the panel and install some kind of speaker from the deck for cosmetics. The hifonics works for no…

josh took these too.. at a cobra show. here captin faggie him self