SoundSplinter

Can anyone give me sond help ? Im planning on makeing a box for one Rl-i8 in a chevy colorado crew cab i want to make this box vented but want to get the air space and frequency perfect to get the most output so that i can compete. I am currently running one 12" RE XXX in a 2 cube box tuned at 28 hertz. all comment will help thanks

Throwing around the idea of 'glassing an 8" midbass, and some 5.25CDT's in a door pod. Is the rli a good option?

is that to much for the 8's 2 cubic ft at 34 hz. if not which amp would you guys recommend http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0

I've been considering putting a sub into an '00 Integra. Basically I am looking that I suppose what would be called an SQ sub, in that I am not greatly concerned with SPL as I don't listen to music very loudly and I also would prefer to have a near flat frequency response between across the sub and the main speakers. Ok, so I'm doing a little modeling and one thing has me troubled. I see on the SoundSplinter RL-i8 page that the recommended sealed enclosure volume is 0.2 to 0.65 cu ft with optimal car being 0.5 cu ft. From my modeling I'm coming up with about 0.09 cu ft for a Q=0.7 alignment. Is there some reason that I wouldn't want this sort of alignment in a car? I…

some crazy things are goin through my head right now.... :ughdunno:

My 2nd 18" RL-p was to be delivered today. While at work I checked on-line and it showed delivered. When I got home it was gone, Stolen. Sometime between the time I left work and got home (20-30min) someone got to it. I'm not in a bad neighborhood so I'm not sure who took it. I asked all my neighbors, but of'corse no one saw anything. I filed a police report (knowing I'll never see it), but I guess it's the thing to do.

title really sums it up. i dont really want to build a ported box if i dont have to. Would 3 or 4 of these subs still be loud and get lows well in a sealed box?

I use to have 6 Tang Band 8s in my vehicle and they got really loud and sounded nice. Im wondering if 3 of the RLi8s would get any louder then 2 of the RLi8s. I will be using a sealed box and am wondering if 3 would get any louder then 2 and if 4 would get any louder then 3. Thanks

The box is 1.4cubes sealed. It's powered by a Directed 1500d. Let me know what you think.

I decided to build a new box for the 18". Started with this........ Then this...... Then this........ I actually have the front, back, and top on. I just haven't taken any pix of it yet. It's bigger then the last box I had in there for the 15". I got about 7.2 cubes with this one. I'll get more pix up later. It's going to have 2 6" aero ports tuned to 34hz, and a Orion 2500d.

Greetings all! After a couple of weeks wading through our terribly disjointed website code to refresh our look and improve the ability to add future content, the streamlined design is finally back online. A week of jury duty in between didn't help matters progress on my intended time table, but things are finally stackin' up and business is back on track. Check out the new WebSite (feedback appreciated!) RL-p18 now available in both dual 4 and dual 2 ohm Price reduced on our RL-s12 from $499 to $449 ($409 per unit when ordering two or more) TeamToxicBass is using our RL-i8 drivers for ongoing promotion: Check out Project Hellboy Just wanted to keep the loyal fans (a…

I can get 14.4cubes net after sub & port displacement. Ported to 34hz with 113" port area in a wall. Will this be enough air space & port area??? I'll be using the Orion 2500d to push them both (if I get the other one) @ 1ohm.

CAn any one help me I have a RL-I8 and i want it for straight SPL. What would be the best box size and port for this sub to reach its max output with about 300-600 watts rms. all comments needed

I was wondering if anyone has used a rl-p 15 in a horn enclosure? this is for home audio... i wanted to try and build a horn enclosure for one, but so far what ive read it doesnt seem to be a suitable enclosure for this sub

Next to my RE6.5 Me Thx Mike

Hey, What are some numbers you guys have been hitting with you Rl-p's.... whether it may be for straight SPL use or just a daily driver and got it metered. I didn't really find any numbers of the Rl-p's and searching didnt help really. If you could, name Car it was in, power, box, and size of Rl-p's.

hello, i am intrested in puttin in some RL-i 8's in my 06 dodge megacab. Currently the amp i own is an re12.1 and was wondering if that was too much amp for a pair of 8's. I listen to alot of everything but love music that has super low 25-35hz tones so im thinkin ported, what are you guys using for ported enclosures? size wize i mean. i used to run some crystal 8's in one of my previous setups but saw the vid for these 8's and am really intrested in trying them. thanks!

Hey, Im new in this forum I am trying to find out if there is a dealer that carries SS RL-p15 in Canada, or is there only one place to get this beast - The One and Only SS Website. I WANT IT !!!!!!! Im in Ontario, Canada so if there is anyone that can help me out, or has a brand new RL-p15 for sale close to me, i will be more than glad to pick it up. Thank you

Ok, I just purchased the new 18" RL-p (D4). The problem I have is the only amp I have is an Orion 2500d. It'll do 1800w rms @ 2ohm. The 18" is rated at 1000-1200w rms (I think). Would I be ok with turning down the gains? I dont have another amp at this time. I do plan on sending in an RE 12.1 amp I have in great condition to get fixed. It "rattles" when you move it. When I bought it, I was told that it was BNIB. When I opened it, it was making the rattling noise. The guy I bought it from wont return my PM's, emails, calls, etc. Any info on how I can make it work would be great. Thx guys, Vic.

I'm currently selling my system and am looking to get a new one. Ive heard great things about sound splinter subs but i've never heard any in person. I want to build the biggest box to go behind my seats in an '04 Silverado regular cab. Also I have an ED nine.1 to power the subs. What would you all suggest: 8's or 10's? and if not sound splinter what kind?

Hey y'all, I'm new to this forum, so I apologize if this topic is already covered elsewhere. I currently have my RL-i8 installed in a modified tube enclosure. I am wanting to put in something nice, and so am looking for recommendations for a high quality sealed box. Does anyone know of any good brands to look into? I'm looking to save trunk space, but give the sub a nice box. I'd appreciate the help.

Hey, i am looking to get a 12" RL-P, and the site has been down for awhile. Does anyone have the T/s for the one with the black cone? I think it is a 2005 model. Thanks! Should 1.65 net ported at around 33 be good?

Well let me explain my story. I had ordered SS RL-p 12s when they had first came out. I'm pretty sure it was Mike's first batch. Old cones. After a week of use, One subs surround started to come straight off of the cone. I had told mike about it and surely enough he replaced it with the next batch, the new aluminum cones no logo. Mike even paid for return shipping! Thanks Mike. Well surely enough about 6 months pass by, not any problems really. The aluminum cone's color has faded from pointing up in my hatch, access sunlight I'm guessing. Pretty ugly. And My Old cone 12 well, you guessed it, starts to come off the cone. It's been around 6+ months now, I've just been runni…

They will be in Mike's hands very soon Thanks for waiting