SoundSplinter

I use to have 6 Tang Band 8s in my vehicle and they got really loud and sounded nice. Im wondering if 3 of the RLi8s would get any louder then 2 of the RLi8s. I will be using a sealed box and am wondering if 3 would get any louder then 2 and if 4 would get any louder then 3. Thanks

is that to much for the 8's 2 cubic ft at 34 hz. if not which amp would you guys recommend http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0

My 2nd 18" RL-p was to be delivered today. While at work I checked on-line and it showed delivered. When I got home it was gone, Stolen. Sometime between the time I left work and got home (20-30min) someone got to it. I'm not in a bad neighborhood so I'm not sure who took it. I asked all my neighbors, but of'corse no one saw anything. I filed a police report (knowing I'll never see it), but I guess it's the thing to do.

The box is 1.4cubes sealed. It's powered by a Directed 1500d. Let me know what you think.

I can get 14.4cubes net after sub & port displacement. Ported to 34hz with 113" port area in a wall. Will this be enough air space & port area??? I'll be using the Orion 2500d to push them both (if I get the other one) @ 1ohm.

Been itchin to go ported for a long time now, since I've never heard my RLp 15 ported before. Whats the smallest volume (before port area) would you guys go for a ported setup?

CAn any one help me I have a RL-I8 and i want it for straight SPL. What would be the best box size and port for this sub to reach its max output with about 300-600 watts rms. all comments needed

I decided to build a new box for the 18". Started with this........ Then this...... Then this........ I actually have the front, back, and top on. I just haven't taken any pix of it yet. It's bigger then the last box I had in there for the 15". I got about 7.2 cubes with this one. I'll get more pix up later. It's going to have 2 6" aero ports tuned to 34hz, and a Orion 2500d.

Greetings all! After a couple of weeks wading through our terribly disjointed website code to refresh our look and improve the ability to add future content, the streamlined design is finally back online. A week of jury duty in between didn't help matters progress on my intended time table, but things are finally stackin' up and business is back on track. Check out the new WebSite (feedback appreciated!) RL-p18 now available in both dual 4 and dual 2 ohm Price reduced on our RL-s12 from $499 to $449 ($409 per unit when ordering two or more) TeamToxicBass is using our RL-i8 drivers for ongoing promotion: Check out Project Hellboy Just wanted to keep the loyal fans (a…

I was wondering if anyone has used a rl-p 15 in a horn enclosure? this is for home audio... i wanted to try and build a horn enclosure for one, but so far what ive read it doesnt seem to be a suitable enclosure for this sub

Hey, i am looking to get a 12" RL-P, and the site has been down for awhile. Does anyone have the T/s for the one with the black cone? I think it is a 2005 model. Thanks! Should 1.65 net ported at around 33 be good?

I'm currently selling my system and am looking to get a new one. Ive heard great things about sound splinter subs but i've never heard any in person. I want to build the biggest box to go behind my seats in an '04 Silverado regular cab. Also I have an ED nine.1 to power the subs. What would you all suggest: 8's or 10's? and if not sound splinter what kind?

Next to my RE6.5 Me Thx Mike

Ok, I just purchased the new 18" RL-p (D4). The problem I have is the only amp I have is an Orion 2500d. It'll do 1800w rms @ 2ohm. The 18" is rated at 1000-1200w rms (I think). Would I be ok with turning down the gains? I dont have another amp at this time. I do plan on sending in an RE 12.1 amp I have in great condition to get fixed. It "rattles" when you move it. When I bought it, I was told that it was BNIB. When I opened it, it was making the rattling noise. The guy I bought it from wont return my PM's, emails, calls, etc. Any info on how I can make it work would be great. Thx guys, Vic.

Hey, Im new in this forum I am trying to find out if there is a dealer that carries SS RL-p15 in Canada, or is there only one place to get this beast - The One and Only SS Website. I WANT IT !!!!!!! Im in Ontario, Canada so if there is anyone that can help me out, or has a brand new RL-p15 for sale close to me, i will be more than glad to pick it up. Thank you

Our newest product - the RL-p18 - joins the ranks of two of the most affordable, versatile, low- distortion, high-excursion woofers in our Premium Series line of low-frequency transducers. Known for their flexibility in accomodating a variety of home and car audio applications in sealed, vented, and infinite baffle alignments, the RL-p18 steps up with its massive displacement advantage, linear output, and absolutely stellar value. Featuring a triple-stacked 215 ounce magnet structure, vented six-spoke cast aluminum basket, 3 inch voicecoil, aluminum shorting ring, dual 8.5" spiders with woven leadwires to eliminate tinsel-slap while allowing for long linear throw ca…

Hey y'all, I'm new to this forum, so I apologize if this topic is already covered elsewhere. I currently have my RL-i8 installed in a modified tube enclosure. I am wanting to put in something nice, and so am looking for recommendations for a high quality sealed box. Does anyone know of any good brands to look into? I'm looking to save trunk space, but give the sub a nice box. I'd appreciate the help.

They will be in Mike's hands very soon Thanks for waiting

What would be the best setup for under rear seat of Dodge ram quad cab box@ about 1.8 ft^3 ? Want it to get loud but still sound good. Any suggestions would be appriciated. One Rlp 12" seald Two Rli 10" ported Two Rli 8" ported

Well let me explain my story. I had ordered SS RL-p 12s when they had first came out. I'm pretty sure it was Mike's first batch. Old cones. After a week of use, One subs surround started to come straight off of the cone. I had told mike about it and surely enough he replaced it with the next batch, the new aluminum cones no logo. Mike even paid for return shipping! Thanks Mike. Well surely enough about 6 months pass by, not any problems really. The aluminum cone's color has faded from pointing up in my hatch, access sunlight I'm guessing. Pretty ugly. And My Old cone 12 well, you guessed it, starts to come off the cone. It's been around 6+ months now, I've just been runni…

I started out with 5^3 @30Hz for 2 15's per Mike from SS. SQ was excellent and lows were amazing. I consider this my reference box. Then I went to 5.8^3 @35Hz. Was shooting for 6^3 @ 34Hz, but did some goofy math at 2am. Subs had more punch in the mid/upper bass, but lacked low end compared to the "ref" box. It was definitely louder, but lacked impact. I tried it for 2 days and didn't care for it. I extended the ports and ended up with 5.4^3 @ 32Hz. I consider this the ultimate tune for LSQ. Plenty of deep lows, loud as he!!, and still very articulate and musical. Kick drums literally beat the car to death. Thank god for the 150#'s of sound deadener I have in there, but…

Got it all wired up and in the box about a week ago, now just waiting on my amp which should be here tomorrow.

hi everyone i am a new to sound splinter i am buying 4 10 inch rli in the next week i am wondering if i should do down fired sealed in my prelude or port them and tune the to something low like 25-30hz trying for as much spl and loudness as possible i was going to get 2 rlp-12s but decided on 4 8 inch rli because i had done a install on the 8 rli and was very impressed so i decided to go bigger i am thinking 1200-1500 watt mono class d?

Hey mike is it possible for you to recone an original 15" RE HC with RL-p soft parts? I'd much prefer to give you the money than RE. Please let me know. To all the guys hello Its been awhile since ive been around

Hey, What are some numbers you guys have been hitting with you Rl-p's.... whether it may be for straight SPL use or just a daily driver and got it metered. I didn't really find any numbers of the Rl-p's and searching didnt help really. If you could, name Car it was in, power, box, and size of Rl-p's.