SoundSplinter

I haven't been able to access the website for quite a while. Is there a greater problem, or is the website simply under construction?

according to the site i would go 3 cu ft tuend to 34hz..but i was wondering what some people have gone with and how it turned out..it will be 90% rap music

hi im just looking for a sub that can go really low while beeing very loud at the same time. i considered either one 18 rl-p or 2 15 l7 as they cost about the same for me. space is ~ 10 cft.

Saw a post somewhere saying that RL-i8's were available, or soon to be available. Whats the story?

Hi, guys! Seeing that I'm currently in the position of selling my eD 19Ov.2's, I have to find something else to put in my walled Mini. Didn't even get to test the 19Ov.2's, but I have had a RL-p15 a couple of years ago, and it's the best subwoofer I've ever owned. And the loudest. ^^ So, now I wonder - for a wall (I can use it as "IB" too (very large sealed box), as there's quite a lot of room behind it): 1 (or 2) RL-p18's OR 1 RL-s15? I've heard so much about the RL-s, I really want to try it out! But would it beat a RL-p18 in output? And what about 2 RL-p's? Thanks!

This is my first "high end" sub and I love it. Then I broke it, haha. It's been getting about 400 watts from an Alpine mono for about 3 months and gets played pretty hard. It's in the trunk of my s2000 and I really have it cranked with the top down on the interstate. I guess I'm still a newb but I like to think I know a little more than the average DA that walks in Best Buy or whatever. I've never blown up a sub and I never thought I'd have a problem with a driver of this quality. So, I know it's something I did or didn't do, just want to know what caused this and how to fix it. This is the enclosure I built for it. Just ignore the wire through the hole ghettoness. I ha…

i have a single RL-p12 sub whats your opinion on a box ( ported or sealed ) also dimensions. to push sub i got a MTX Thunder 1000d, is this good enough to push this sub? i also dont know what type of connection, sub to amp. i tried get help locally but they dont know whats a SOUNDSPLINTER. so basically i need to be educated.

hi i am interested about RL_p18subwoofer. i use from earthquake ph5000 amplifire. is rl p18 compatible with 2000w in a minute? is rl p18 tolerate high power in a minute? how much watt is tolerable for rl p18 at a time? this is image of my system for now : My link

Does anybody have any Rli-8 mounting gaskets? I mean anybody I need (2) of them> Please let me know [email protected]. Thanks

Picking up some 12" LMS 4K's (have one now, the other should be along this week). Just wondering I know they seem to use the same style motor/basket/surround and svc LMS 3 ohm coil. Looking for some input on real world application from someone who has done some testing in differnt alignment boxes with this style driver.

have any of you Ibed it at all?

yes fibreglass.... NOW before u say it will dry way to hard etc etc the cone of my sub is aluminum i think, its painted but i sanded a small part and its shiny under so im thinking of trying to fix the HUGE crack with fibrglass this isnt my first time with glass so i know how to use it and prep ur piece etc, u think it will hold? damage pic now that was taken after i first heard my sub sounded wierd, this is after i straightened it abit(could probably get it better) i should say this would be a TEMP thing, i jsut sold my last setup and want something to bump until i find something to buy

Hey guy's. Im a newbie here. I am looking at the soundsplinter sub's. My question is which should I get? One rl-s12 or two rl-p12's. I have a 96 chevy tahoe 2 door. I dont use the back for anything, so space is not a problem. Or should I get another kind of sub? I like the soundsplinter's because I have never heard anything negative about them, plus they are cheaper than the other sub's I was looking at. (Re audio 12mt's) I have a kicker sx1250.1 amp. The birth sheet say's 1450x1@1ohm rms. Also ported or sealed? Any help would be great. Thank's alot.

OK... Buddy wanted to buy my RLp-12 and 'try it out' before paying up. He neglected to adjust gains and crossover on his amp, much to my chagrin, and burned up the voice coils. Apparently his head unit did not have a sub RCA pre-out, so he used the rear RCA pre-outs, which was sending full range to the subwoofer amp. Additionally the gains were turned all the way up (he has some Audiobahn 1000w RMS amp) and the crossover was wide open. So, after connecting the amp he popped in a CD and proceeded to send a full range signal at max gain the RLp-12 for about 30-45 seconds. The result: burned voice coils and the sub seized What are my options to get this guy repaired? M…

Like the title asks; Is an Alpine PDX1.1000 powerfull enough to run an RL-S15. Anyone ever try this combo?

I am aware that the SS rl-s utilizes TCsounds LMS system, but I am not sure if the Rl-p series does as well. Anybody have the knowledge here?

My RL-p 12" died so I'm looking for a replacement. My ride is tiny, Scion xA, so real estate is limited. That being said, I'm leaning towards a 10" rather than another 12". I already have a nice ported 10" enclosure that fits well and was wondering how the RL-i 10" would perform in 1ft^3 net tuned @ 36Hz. Thanks in advance! E

Hi guys, well I've had this Rl-i8 for about 2 months and it was real good. I had a custom box built for it that was about 36" long, but had 50" of port area, tuned to 34 hz and about 1 cuft of airspace. Man was this sweet in my car. The thing is, I started smelling something odd (didn't recognize the smell) I thought it was my engine, but left the car on to find out what it was (left my music playing fairly loud) and then the bass just gave out. I noticed my amp was running pretty hot and noticed the remote wire was loose (DOH!) could this have been the reason my subwoofer gave out? I removed the sub from the enclosure and sure enough the voice coil was burnt black. It wa…

I wanted to get this amp but will it give sufficient head room for the sub. I know that sundown amps are awesome which is why i want one but some people say you need a little more power on the amp than what the sub needs. The sub will be ported to which mike recommends only 800 watts to it (I think). That will give an extra 200 watts in solitude until called upon during spikes in bass lines. Is that enough or do i need more? I want this one because its cheaper than the 1500d. Any suggestions and confirmations will be greatly appreciated.

so i've had interest in the RL-Ps for a while now, right? I figured for the 18s I want to put in my cherokee it'd be best to use something that everyone doesnt talk about. i've seen a couple videos of the 18s in question on youtube, and they appear to be some nice drivers, so, I am curious about em. I mean I would go with the flow like everyone else and get a Fi BTL, but, too many people use em, right? well, enough of my babbling, some questions for ya. First off, what amp would you recommend for 2 18" RL-Ps? (im trying to stay cheap, but not too cheap, basically, trying to spend under 800 for an amp) Second off following the top question being amps, What would you recomm…

I'm going to be running 4 Signature 12"s ported and the most I can muster up for each is 1.25 cubes ported to 33Hz with 500w to each. Is this going to be sufficient air space for them to function properly?

I was wondering between the 2 subs was there any difference in specs? I have 2 sitting here, and of course the only visible difference is the cone. One with the logo, and the other with Mike's sig.

Hey guys, I am looking for some help in determining what sub enclosure would work best for me and my truck. I listen to mainly Metal/Rock and occasionally Rap. I want deep, clear sounding bass that you can feel. I have built many sealed enclosures that have worked great but was thinking of trying out a bandpass type enclosure, something more challenging! I have an 05' Chevy Colorado EXT Cab so space is kinda limited, lost the seats a while ago for my current box! Gonna hook up two RL-P15's to a Sundown SAZ-3000D, to buy in the near future. I figure there is plenty of guys with more experience on how different enclosures react to certain types of music and drivers that ma…

well, i used to have a pair of the RL-i 8s, i wanted to know how the orphan 8's compared to the RL-i's, i was thinking about getting 3 of them, but not sure if they would get as low, pound as hard, get as loud and sound as clean as the RL-i's.