SoundSplinter

Are these available in Dual 2-Ohm coils? If so, I'm going to be ordering one instantly. If not, I'm gonna need to find something else

I was wondering if anyone has used a rl-p 15 in a horn enclosure? this is for home audio... i wanted to try and build a horn enclosure for one, but so far what ive read it doesnt seem to be a suitable enclosure for this sub

I first built this box about six months ago. But when I slid in the box, I noticed that the back seat wouldn

Hey, Im new in this forum I am trying to find out if there is a dealer that carries SS RL-p15 in Canada, or is there only one place to get this beast - The One and Only SS Website. I WANT IT !!!!!!! Im in Ontario, Canada so if there is anyone that can help me out, or has a brand new RL-p15 for sale close to me, i will be more than glad to pick it up. Thank you

Hi, guys! Since I bought my RL-p15 (dual 2 ohm) earlier this year, I just know there can't be another sub out there to match this truly super woofer when it comes to price/LSQ/fun/pleasure. I had a LSQ setup in my Civic, did 144.4dB legal on the new TL. With small ports and a cheap ass amp I figure that's pretty decent! Now I've sold my Civic HB, and bought a little funny jap - Honda Del Sol (the "little two-seat Vtec-beast"). Thing is, I still want to use my RL-p15! So I sacrificed a little seat travel, and bent my knees for some awesome beats from this little rascal. A fiberglass enclosure behind/between the seats should do it, right? Now we're getting to the main issu…

*sorry for another amp question in a row i just got my RL-p15 in yesterday, biult a 2cu. ft. sealed box and ran it temporarily off an Alpine MRP-M350 amp. i had to drive the amp close to clipping for the lows to come out, but i know i was badly underpowering it. im planning to go ported once mike gets back to me on my ideas. i had these amps in mind: Alpine MRD-M1005/M605 maybe Rockford T10001BD MTX 801D PG Octane R 8.0.1 I really want to spend less than $350 though i know some that i listed are over that. any help would be appreciated. thanks

Hey yall. Well ive came to the conclusion that i am goin to get the Rl-p15. I was just wondering what the specs are on this sub and how long should it last (not going to overpower it)? Just throwin this out there but ive heard these subs are great and i am wondering why when i went to some custom sub place they never heard of Soundsplinter?

Hello, Somewhat of a newbie when it comes to subwoofer systems and I am looking for some advice. I currently have a SoundSplinter RL-p15 in an ported enclosure, the enclosure is "4.694^3ft gross box vol. Slot port, 15" x 2.5" x 35.25" Long tuned @28Hz. After all displacement, 3.503^3ft net box vol". I am currently powering it with a ALPINE PDX-1.1000 and I have a second ALPINE PDX-1.1000 available that is not being used. It really hits and I do enjoy the setup however I end up wanting more power thus my question: If I was to replace the RL-P15 with 2 RL-P12's and power each with a ALPINE PDX-1.1000 what kind of difference would I be looking at from the single 15? It seems…

When will you guys get them back in stock? It's either one 15 or two 12" and I really don't want to spend the money for an amp to power two 12"'s... As far as the RL-p15 goes... 600 watts should be enough power for a ported box right? Could I go higher? Thanks in advanced!

My RL-p18 is arriving tomorrow, the box i am going to build will be 5.3ish cf tuned to probably 29hz. This will be a dual-2 model running off a Sundown SAZ1500 @ 1 ohm. Will 1500+ rms be o.k. for the RL-p in this size box? the box will have about 60 sq inches of port, will that be enough? btw, i used the RE box calculator to mess around with some designs. I have heard that their tuning is a little off, does anyone know about how much so i can compensate for it? sorry about all the questions, I just dont want to eff up the sub Thanks, Cody

1st Would 800wrms be ok for a RL-s 12" sub in a sealed box at 2cu. I would like to try one out but not sure if I have the power. 2nd RL-i 8s I have them in my car now in a .4cu each sealed they sound real nice. I miss the overpowering bass of the RL-p12 ported. I do like the sound of these sealed . I would like to know what you think the most power they could handle in a seal box. I like the little room they take up. I was thinking about getting a bigger amp for them. right now they are getting 400wrms each do you think they could take 600-700 each or is this not a good idea. Thanks for your help. Mike J

im kinda interested in the rl-s 15's and wondering what type of tc sounds motor they use . also im debating on going with 3 XXX 15's useing three Soundstream PCA2000D or 2 rl-s 15's useing two Soundstream PCA2000D. what your opinions on either setup . ohh would 220 alt be enough or would i need more power

This by far is will the biggest cabinet I have ever designed and to be built. The customer is using a RL-s 15 for Home Audio. The cabinet is 29" w x 29" h x 38" d and the entire beast is 1" MDF - Triple Baffled w/ the subwoofer recessed and braced like a solid brick sh!t house. The back of the cabinet is within the interior of the cabinet with a 6" space to the exterior back for mounting an plate amp. The space isolates the plate amp for the enclosure interior. The customer requested the bracing to be pure overkill to deaden the enclosure. A custom grill cover will be done that slips within the recess cutout which the front part of the grill cover will protrude beyond …

I have almost got my mind made up and I'm getting two RL-S 15's! They are going into a 1996 S10 extended cab. I have my eyes on a hifoincs colossus II amp to power them. I have talked to mike @ SS, and he thinks that I will be happy with that. I just would like more opinions on this. I can do a 9.3 cu enclosure. (thats the limit of the space I have to work with. As with the specs being a bit confusing, (I don't have any modeling software) I'm not sure about the enclosure type to go with. I would like the highest output I can get, while keeping the SQ somewhat decent. Once I get back from Iraq, I want to show one of my buddys up too. He has 4 Memphis M3 MOJO 15's in…

I am aware that the SS rl-s utilizes TCsounds LMS system, but I am not sure if the Rl-p series does as well. Anybody have the knowledge here?

well I was gonna wait till I got my second power acousik A3000DB so I can tell you how it sounds w/ some real power but I'm getting antsy an wanna show off. So w/o further adou... box in the making another bracing heres the speaker hole and hole for interchangable port and final assembly And for the grand finally! here is a 4"x8" port tuned to 45hz to see what this can do off of the little bit of power however now one of the hurrican nuts came loose from the back and got stuck but I just fixed that today and now w/ some liquid nails holding them in place I'm hoping it will work. but now I have to make a new port since I kinda broke this one trying to get it off BTW…

ok folks, here it goes. First, thanks go to Mike for letting me test out his baby. It is a blast, to say the least. Second, this is just some preliminary review. I've got some more listening time left and I plan on using it ! Alrighty then, on to the beef; Vehicle: 2005 Chevy Trailblazer. Factory electrical and Bose sound system. Amp: Orion 2500d wired to 3.5ohm nominal (not much choice, eh?) Box: 2.5ft^3 tuned to 28hz with 32in^2 of port. Music played: You name it, for rap to rock to test tones. Impressions: Clarity: this thing doesn't know distortion. even when I clipped the amp, distortion is, well, impossible to pick up, to my ears at least. I have no…

I am going to be getting an rl-s 12 ... and i need to get an enclosure for it ... i was previously running a rd alpha 15 and im switching over to the rl-s ... i have an 01 focus hatchback and i was thinking a 4 cubed box upfiring now ... amplifier is the issue ... the single 3 ohm limits the amplifier selection so what are most of the people running to it? thanks guys Mike

Hey guys. The unusual T/S parameters and technology in the RL-S woofers have really peaked my interest in them. I've done a bit of research and I'm really considering them for use in car. The high QTS and high FS (especially of the 12 inch version) makes it look like these woofers would start to roll off right around where a cars transfer function would start to kick in. The tiny vas also makes achieving "true" IB easier than some woofers with vas ratings in the hundreds. Along with IB, I'm considering a sealed alignment because woofer performance wouldn't be affected by whats in my trunk. The problem with this is the box requirements are so huge (as per them T/S pa…

"2ohm single linear voice coil (TC Sounds patented proprietary technology, first time it will hit the open market)" Does this mean the rl-s will only be able to run at 2ohm or how about will we go about wiring it up? reason im asking this is i might start looking for an amp and wanna know what it should be stable at...also for 2 subs to be wired up...thanks

I have been searching around for a decent sounding 18" sub...and I wanted to compare the RL-s with the Havoc (even though there is no 18" RL-s)...regardless... why does it seem like everyone goes with the RLp instead of the RL-s?? Kinda confused me... is the RLs more SPL oriented?? also if anyone has a good suggestions for a nice sounding LSQ 18" sub that can take about 2k+ please let me know, cause im having a hard time finding one myself...its either that, or 2 12's... I would like something that I can use sealed, but also ported...Hence why I was looking at the Havoc, but it has limited power handling it seems. Thx

Does anyone know of someone who builds an enclosure for 2 RL-s12's 2x2.5 cu ft. each sealed ? I'm extremly tool challenged.

Has anyone run an RL-s12 or 15 in an IB in car yet? If so, how much power utilizing? LMT is an unusual technology and I don't feel modeling programs and/or spreadsheets properly represent real world performance (that goes for any woofer really). 2000 watts into 3 ohms is hard to come by in a car. The PDX line's regulated output is nice, but max I can get from them is 1000 watts. What are you guys running?

I use to have 6 Tang Band 8s in my vehicle and they got really loud and sounded nice. Im wondering if 3 of the RLi8s would get any louder then 2 of the RLi8s. I will be using a sealed box and am wondering if 3 would get any louder then 2 and if 4 would get any louder then 3. Thanks

Im "considering" getting my front doors redone via fiberglass and setting up a strong front stage. Comps up top, with some RLi 8s in a sealed atleast 0.4cu ft enclosure per door. Depending on the amp still havnt decided if im going to go with SVC of DVC as of yet. Going to give them atleast 150rms per to work with, maybe even upward 300+ should my elec system support it. Upto what freq range would the 8s be able to go upto? I was thinking upto atleast 200hz, still open to debat on what to cross them at. As for the comps, im leaning heavliy towards a set of rainbows...undecided which ones atm. From the looks of things is going to be atleas a 600+ rms front stage should thi…