SoundSplinter

I am looking to buy one RL-i 10" and was trying to figure out which amp I should buy. Would either of these work? I am hoping to put around 400-600 watts to it. http://www.millionbuy.com/prfap1000.html http://www.millionbuy.com/prfap1200.html Also, do the subs come with any logo on the cone? I really like the X logo, but it doesn't look like there is anything on them.

Is the Alpine Mrd-M605 to little for the Rl-p15 in a vented enclosure?

Ok I ordered two RL-P 12's from the group buy and they will hopefully be showing up pretty soon now so I wanna get ready for them. My box will be approx 2.7 cubic foot shared fiberglass box for both subs (so about 1.35 or so each sub), should I stuff will polyfill and how much? Also will a Lanzar Opti2000D run at .5 ohm work well in this application? It is bit of power, but I figure it will work well running sealed. Here is the amp: http://lanzar.com/citempage.asp?MODEL=RBOPTI2000D I am getting excited now that my system is finally coming together, lol B)

Could someone help me with the dimensions for a box. I'm wanting to go 1.8^3 @ 30hz. This will be for a single 12" rl-p, and will be going in the back of a tahoe, so room isnt really a problem.

I cant really see any downsides of having my boy draw me a sweet ass picture on the cone. Im just not sure what it should be done with. I was thinking a black sharpie, but I was also thinking paint. What kind of paint would work for an aluminum cone that wont melt when the cone gets hot?

Man you have the RL-i's looking so good that it is an injustice to the RL-p's. It actually looks like the RL-i's are your premium line. Of couse if this is gonna take away any time from the RL-s then forget it.......the site looks great!!!

okay so i had a light bulb go off and had a stroke of genious. external port!!! mounting depth is 7.89 on the rl-p fifteen, if i give it 1.61 inches room between the magnet and back wall should i be safe? and is the mounting depth from the bottom of the mounting ring to bottom of magnet? if it is, in that case add .75 to 1.61 and have....2.36 inches of clearance! go me!

of couse i get a new car, and OF COURSE i have yet another car that troubles me with the sytem. 05 mustang.....i need 2.5-3.5 cubes according to the specs here that Mike has. if ANYONE has seen ANYONE with something NEAR 3 cubes in an 05 mustang please give me some info on them so i can track em down and shoot the chit and get me a box plan! ported of course

First of all I want to say thanks to Mike for kickin ass and I love my RL-p. So I have an RL-p 12 in a .55cuft net sealed box (its inside the cab of my car behind the pass seat, I hate the way trunks make bass sound muffled and quiet). It's running off of a PPI 2150 (about 500-600wrms). I had a local high end audio shop run software for this sub (and confirmed their numbers with other internet sites) for a Q of .7 Seeing how that is what most sq people rec I went with that. My question, the speaker seems to distort when driven hard and I'm trying to figure out if it is the speaker distorting or the amp clipping. Freeair testing this sub it looks like it can move way fart…

I got a new RLP-15 on daway i need to prepared the box for sub. How many cubic is recomended ? tuned to ? IM more in to sound quality ported prefered.

im ready to buy some SS drivers to go with my 9.1. right now im leaning towards two 10" RL-i's. what do you guys think about the 9.1 pushing them? or should i just go with 1 RL-p 12? im really into clean, punchy bass im going for SQ in a 4Runner. does anyone own or has anyone heard the RL-i's that can give me their opinion on them? thanx

Would a Hifonics BX1205D be good for a pair of Rl-i8's. I think theyll get about 500 watts each at 1 ohm because theyre overrated. Tell me what you think of this combo or other amp choices?

Would this be too much power for them if I watched the gains? I am also thinking about upgrading to 3 rl-ps and the 2500d at .67 ohms

I am posting this hear rather than the amplifier section on the team ssa forums, simply because there are more SS users right here If this should be moved, thats np at all. What I need is an amp to power my single RL-p 12" D2. So im looking at 1 ohm and 4 ohms. for budget it would reeally be nice not to be broke after, and have to save up for weeks again to get some comps. Things like the eD 9.1 for 350 is probably the highest I want to go. and I know that there is a lot of hifonics things that can do the job. at the same time I have heard alot of nasty stories about em. This is my first system.. and can upgrade later, just want to get the ball rolling on it. Any a…

Wassup guys, i finally joined this forum. Well, i sold my system about two weeks ago to get a new phone and now i'm starting to REALLY miss bass. I have two system plans so far for my scion xb and I need y'all to help me out. 3 Rl-i8's with a hifonics xx hercules (recieving about 400w each) Or 2 rl-p12's with ed nine.1 Which one should i get?

Hey, I am looking for my next up front sub. Need to run a small box of course and I have been running WinISD charts of these subs: RL-i8 RL-i10 Image Dynamics ID8 d4 v.3 Dayton Audio 10" TITANIC III A Qtc of .71 is the goal. CHART#1:RL-i8, ID8, 10" TITANIC GAIN CHART: RL-i8, RL-i10, ID8 SPL CHART: RL-i8, RL-i10, ID8 I have about 280-350 watts and already have a .25 cu ft box. This is about as big as I want to go upfront. Looks like the ID8 has the potential for good output with my power but the RL-i8 & Rl-i10 are more in line with my box size? May try another box program. Any thoughts?

Ok after much time being spent on a stealthy instal I have narrowed it down to the RL-i 10" and the Diamond Audio M6 10" this is the M6 not the M6 markII or the D6. With the install depth, the air space limitations and the so forth these are the only two speakers I am considering. Application, 3 - 10" subs will be running off a Zapco 9.0X the impedence of the subs is not an issue due to the amazing flexibility of this amplifier. Airspace will be roughly .5 cubic feet per sub net sealed. Fiberglass tub and console have already been made so the airspace is what I have and all I have. Currently I already have one M6 which I bought to tied me over so I wouldnt be without b…

Not sure if this has been released yet, but, how is the inductance. I loved my XXX, but I got rid of it, for the fact that, even in a sealed enclosure it had little output above 60 hz. Is this Proto or RL-S going to be able to have a little more extension in the upper bass range?

well as you might have known I was yes going to go for 2 12"Rl-ps and yes i still might get them. But I have also herd more news of the new Rl-s. now I recently quit my job so money wont be coming in. i want to get one in a month or less but i can order 2 12"rl-ps right now. but if it were up to you should i just sit back and save more and go all out and get some rl-s's or mabey get some 8"s. the 8's IMO look hawt. and pritty cheap. thats the reason for this post, I think way to much on what i should do so i want some info from you guys....thx. ~shane

I am looking to build a box for 2 15 rl-ps. My max dimensions are 44 D x 17 h x 19 D. I am looking to put both subs on the left side with the port all the way to the right side. I want to tune to about 30 hz. Thanks.

Mike, i was wondering what the plans are for SS. do you plan to keep it internet style, unless im missing something, or do you want to see SS subs instore

I know quite a few of you have been houndin' me for pictures of the new drivers - and I've been hesitant as we continue to refine and play around with different options from week to week, but I figure you've waited long enough and deserve an inside look at what these drivers will be lookin' like when they are finally released this coming summer. However, I will be keepin' ya in suspense on the driver's excursion for now, but will get some nice pr0n for ya'll in the next couple weeks Please note that the drivers pictured herein are still slightly different from what the final production versions will look like - but for the most part, this will definitely give you …

Hey I was just wondering the amount of power that can be put through a 12 RL-P as compare with a 15 RL-P? I want to distinguish if I should get 2 12s or 1 15. I am looking for a system that has great spl but at the same time has good sq! Thanks for the help. Mike

Get it yesterday and its seen about 3 hours of play time and its working great. Very basic looking which I like, BUT I also didnt know you could get chit put on the cone. its in 2.5cubes gross, 2.3ish net. Box sounds good, I like big sealeds, definitly muddy on some songs. Woofer is working great im not pushing it hard right now but ill open it up in another few weeks. So far its a good woofer. I'm anticipating opening it in up a few weeks to justlfy the 300 dollar price tag, also at which time I will have tried it out in a ported box so I can make that comparasion. With that Im off to do some more tuning, and crank Guns N Roses. And im going to eat a Rochester Garbage pl…

So I am looking for a new vehicle but I am still wanting to do the console for the 8s. Need a few opinions. I have about 1.3 cu.ft. with room for 1, 2, or 3 of them. I also have 2 amp that I can use. 275 HCCA 75x2@4 300@4 150x2@2 600@2 300x2@1 1200@1 [email protected] or the 600D 250@4 400@2 600@1 So power isnt a problem. But my question is 1.3 gross with 2 of the 8s one rear fire the other downfire. Ported or sealed? I have the room for both. If I go sealed I will probly make smaller chambers in the console, ported dont really know with a box that big. I guess that I could just make it smaller or make an internal chamber like the sealed would be. Man am I rambling. Giv…