SoundSplinter

effendi's post about soundsplinter's bandwagon (which i like to think i'm partially responsible for) got me to thinking... notice anything different about this one compared to others? like, noone claims the soundsplinter sub is the endall to woofers? the rl-p is a great driver, everybody mentions that, but in certain cases i've seen other subs recommended over it (myself included). be it power issues, money issues or whatever... is this a reflection of the owner? i mean, he'll go so far as to say his driver isn't the one a person wants based upon projected application. he'll also sign his subs, which is totally cool, IMO. i guess what i'm getting at is this, most bandw…

Hey is there anyone in Michigan (west Michigan) or anywhere in the Midwest, looking for sound splinter subs. I am only looking for one so I wouldn't mind adding another for someone to get the discount and shipping. I am looking for two doesn't matter to me which one I get first, either an rl-i8 or rl-p12. Thank Andy

a happy face!!! is that possible mike?

i was thinking of getting one 12w6v2 and putting it in a sealed enclosure of about 1.25 cu. ft. This would be powerd by a nine.1 at a 2 ohm load giving a max of 900w, I will probably give it much less by adjusting gains. however now i am thinking of getting one 12" rl-p. what type of enclosure would you recommend to get the best sq out of this beast. would this sq match that of the 12w6v2 or get even close? by the way the 12" rl-p will be wired in a 1 ohm load to a nine.1 which could give it a max of 1200w but I probably wont give it that much. also can I assume that the 1 12" rl-p will have greater SPL then 1 12W6v2 when placed in similiar situations?

well first off Hello to all the people on this forum. this is my fist post and I want to figure some stuff out. OK first off I am a "nood" when it comes to box building. and I have come to the decision to purchase 2 12" Rl-p's because well they look like damn sexxxy subs and people have said good things about them..NOTHING BAD!!!. and the price is great. anyhoo. I need help getting box specs for my pathfinder. I have no clue on tuning a box. and what would the best tuning be for them. in a ported box. That is a little drawing of what my specs are for my pathfinder. if anyone can help me design a box for 2 12"s ported. [i dont know what the best frequency would be for t…

hey all, i was just wondering, how much of an improvement in spl and sq (in your opinion) if any will i get switching my LI in for an RL-P i just ordered?? All with the same amt of power about 550-600w, and same box (but shrinking the internal volume by .75 cubic feet.) and tuning it around 30-32 hz.

Hey guys, well someone was selling their pair of 12" rl-i's on the caraudio forums and so I had to jump on it. I've been wanting a pair of the RL-P's for a long time but I couldn't bring myself to pay $430 for the pair and then another $120 for shipping to Canada . Well I've read these subs are more SQ than SPL, these would be going into a total 2.5 cu feet sealed box so 1.25 cu feet each. They will be powered by a Crossfire BMF1000D so ~500 watts rms each. My question is, did I choose the right subs? I read all this stuff about the RL-P's but I never see anything about the I's. I was looking for an LSQ set up, lots of SPL but SQ at the same time as well. I'm looking fo…

I know the rl-p's are solid LSQ drivers, but just how much is the split between sq and spl? I used to have a pair of L7 12's and was happy with the spl, but not as happy with the sq. I liked those subs and since both are around the same price range, i was wondering how the rlp's would compare to the L7's spl-wise thanks

I cant wait for the guy who wants to buy my bahn to get his money already so i can get my hands in 2 rl-p 15's, i dream about them every night. WAITING SUCKS!!!!

Well I joined the forum here just to learn about SoundSplinter Subs. I have a few questions When did soundsplinter start? Any info on production processes. What

Ok, well my boy is wanting two 8's. I directed him to the RL-i8's. I need some input from people who are running them already. Some form of a review in a ported box would be great. Maybe a comparison to other subs. Please let me know. Thanks

Just like the title says does anyone have any first hand experience with the prototype TC Sounds LMT drivers. What were they like first hand? What size was it and what would you compare it to from your own experience? I am trying to figure out if the SS LMT is gonna really be a viable single woofer solution for me or if I should go with a dual setup of lesser woofers. Thanks Jerry

well my rl-15 is on the way and im onlky pushin 600 watts to it, and im thinking of porting it. i believe the recommended tuning is 28hz? there are prefab boxes on ebay pretty cheap but tuned to 38hz X_X right now im throwin togethor a ghetto sealed from a dual sealed box i had from my last pair of subs, but i dont plan on keepin that as the permanent home of my oh so sexy rl-p =)

I have been shopping around for new subs for a long time now, switching back and fourth from all kinds of speakers, but in this forum, EVERYONE seems to be happy with soundsplinter. i can't believe it noone has NOTHING bad to say about these subs, which say a lot about the product. i'm looking for decent sq, but really high spl, and from what i've read on the forums on both here and on sounddomain.com, these sound like the speakers that would match my wants. i still want to know a little more, though... to me it sounds almost too good to be true. the subs were compared to re xxx's on sounddomain and a few people said that these subs are about what and what (the 15's), bu…

Alright, ive though it over and over and eveytime i take a bubble bath i think of this. Ive decided to save up a little more and get and wild system, something that will be ground shaking and make leaves fall off trees. Heres what i will buy. (1) Orion 2500D (2500x1 @ 1Ohm) Buying from HCCAfan. (2) SoundSplinter RL-p 15" And i will port them, i dont care if i lose all of my trunk space, i love bass. Why do i need a trunk besides to put subs in there? I was wondering if these subs will be safe with 1250wRMS for a daily drive. Im asking because its better to be safe that sorry.

i read this over at car audio forum.com wait a couple months for the new soundsplinter LMT. It sounds like it will fit your criteria perfectly. 38 mm xmax with a ruler flat bl curver and a price tag right under what you're looking to spend. It will walk all over all 3 of your current choices. is this true, if so any other info, is there a proto out

heres a link to the avalanche specs. I've already ordered a rl-p d2 on the group buy but i may pick up the avalanche, too if its not a very simliar sub. http://forum.soundillusions.net/showthread.php?t=50318 the box will be small sealed and if somebody could tell me which is most optimal i would appreciate it.

is that a new 10" rli, if so, is there gonna be new 12s or new rlps

I am currently in the mood to upgrade my system. Partly because i blew my amp and partly cuz i have add and i've had my current setup for over a year now. but anyways i was thinking of gettin a Rl-p 15 and an nine.1 to push it and droppin it in a 2.5 cuft box after displacement tuned to 25 hertz. what do you guys think. Or schould i wait and look at the lmt drivers?

Just a quik question. Would you guys recommend a single rl-p ported or 2 rl-ps sealed. I have limited trunk space in the back of a eclipse. I I go with one sub I have to get a new amp. I currently have a Mark Antony running 2 E12ks 2nd generation at about 1400+ watts@1ohm sealed. The 2 rl-ps, if I can get another dual 2ohm would put the amp over 2000 watts. There reason I am asking is because i want to know is it sensible to run 2400 watts for a car that will probably only see a couple of local comps.

and whats your setup

Hey all i am having trouble ordering an rl-p 15 from soundsplinters site. Some unkown error comes up when i try to register to buy this product. is there anyway else to buy one of these but rattling subs??? any and all help will be great.

well now that i'm in the groupbuy, i need plans to make it work out the best. I currently have a JBL600.1 amp and was planing to use it with the sub. However i see many people going with a ported box and the amp don't have that subsonic filter thing. So what would you recomend me doing? Should i just stay with a prefab 1.25 sealed box that i have already? I want to build a custom ported box for it.... BTW it is going in a sports compact.

These are the screen names and quantity ordered: Brian - 2 Finebar4 - 1 Apt - 1 skmfkr - 1 EFFENDI - 2 XtrmAudioCncpts - 1 crashmw - 1 (confirmed, w/ the possibility of 2 [still unconfirmed]) Denim - 1 whiplash - 1 (from CA.com) Flakko - 1 (CA.com) allenzo - 1 itzme218 - 1 -------------------------------- That should put us at 14 confirmed purchases. IF YOU ARE NOT ON THAT LIST AND WOULD LIKE TO BE, OR HAD PREVIOUSLY CONFIRMED AND WOULD NO LONGER LIKE TO BE PART OF THIS GROUP BUY, PLEASE CONTACT ME ASAP I will in all likelyhood, either tonight or tommorrow, send out a mass e-mail to those above to re-confirm purchases And remember, payment is due UP FRONT.

full output like at adires site, it says the brahma will reach full output off 900 watts in .92 cubes tho the subs rms is 1600