SoundSplinter

full output like at adires site, it says the brahma will reach full output off 900 watts in .92 cubes tho the subs rms is 1600

ok, ok.. got this bad boy installed in the recommended .17ft^3. with the t/s parameters mike listed, this thing can mechanically handle 1600 wrms before exceeding xmax...thermally, well, that's a test for another day..lol. anyway, i've got it wired for 2 ohm and running off the hifonics nx750d in my wife's car, so it's getting a rated 400wrms. and i'll say this, i think the 400 is just tickling this thing..lol. it, while moving, isn't being stressed at all. it's a cool lil sub. musically, wow! from freak-a-leek to speaker box intro to pour some sugar on me..it just doesn't miss a beat! i do believe the box is a lil on the small side, but then again, it does a great job of…

Just a quik question. Would you guys recommend a single rl-p ported or 2 rl-ps sealed. I have limited trunk space in the back of a eclipse. I I go with one sub I have to get a new amp. I currently have a Mark Antony running 2 E12ks 2nd generation at about 1400+ watts@1ohm sealed. The 2 rl-ps, if I can get another dual 2ohm would put the amp over 2000 watts. There reason I am asking is because i want to know is it sensible to run 2400 watts for a car that will probably only see a couple of local comps.

Hey all i am having trouble ordering an rl-p 15 from soundsplinters site. Some unkown error comes up when i try to register to buy this product. is there anyway else to buy one of these but rattling subs??? any and all help will be great.

http://photobucket.com/albums/y118/jdva/?a...urrent=dims.jpg I need those dimensions, can some one please help out on this

everybody vote

http://www.soundsplinter.com/high_end_subwoofers.html haha, that's funny.

Ive got about 900-1000w to work with, at either 2-3-4 ohms(amp switches from hi current to hi power). Im trying to decide between 2 10" RL-is, 2 12" rL-i's or 1 12" rL-p. No matter what, the setup will be sealed in a somewhat small enclosure(probably the max size would be around 2 cubes total. All opinions r welcome, Thx Shawn

Alright, iam stuck trying to find out what should i get, 1 rl-p 15 or 2 rl-p 15's or 2 rl-p 12's. I have a Neon, and have an AudioBahn A2502DP here brand new, never used, it can do 1000x1 bridged at 2 ohm and 750x2 in 1 ohm. I wanted to know from mike or any others, what are your opinions. Thanks in advance!

The following clip is of an RL-i12 driver inside a 1.2 cu ft net volume sealed enclosure, driven by a 500watt Bash plate amp. Song being played is a rap run known as "Ain't Nothin' But a G-Thang" by Snoop 'n Dr. Dre. Nearly went deaf recording this video (note to self, wear ear plugs when you're sitting right next to a loud woofer ). Just figured I'd throw this one up here to dissuade the fears of those who might think the RL-p is the only worthy contender from SoundSplinter Broadband .avi Clip with sound: ~9 MB Dialup .wmv Clip with NO sound: ~1 MB *Note: I'd suggest right-clicking the boradband link and 'Saving Target As..' since playing the file directly with Windo…

Ok, I have 1 RL-p 12" d4 en route to me right now. I have a 1.4cf sealed enclosure awaiting its arrival. My task now is to select an amp for the beast. I see the rms watts listed for the sub @ 500. Should I be looking for an amp that produces less that that (300-400 rms), or is the 500-600 range rms gonna be ok? I have certain size restrictions, as the amp cant be much over 14" wide. I am open to really any model, I guess I dont have a preference. This is my first dive into 'real' equipment, as in the past, I have only used, what I would call entry level stuff. I have considered phoenix gold, mtx, planet audio, hifonics..but, I dont know what by todays standards…

Well, I've pretty much narrowed my first sub down to this baby. I've heard nothing but good reviews from it. I origionally was looking at a Type R but from what I'm hearing this should be much better. Just a few questions for you guys. Will one 12" be enough to get fairly low and shake some chit up? I'm looking at a Hifonics Nemesis Series NX750D to power it. Should that work out well? The only thing I'm not to sure on is how to rig it up to the amp with all of the 2 and 4 ohm stuff. It gets a little confusing for a newb. Also, what kind of box would I be looking for. I'd like to build one but if there is a decent premade one it would be cool. Sorry for all of …

Ok, I've decided that I want to go with a set of Rl-p's. Either way I go, I have enough room for the recommended enclosure sizes. They will be powered by an eD Nine.1. The problem is, do I go with 15's or 12's? I listen to mainly rap, and I want it to wang hard. However, I do listen to classic rock from time to time. Maybe you guys can help me decide on 12's or 15's? Thanks, Ry

I am currently running a eD 15a powered by a PG 1200.1 in a 1.5 ft^3 sealed box. I was wondering how the SQ of the RL-P compared to that of the 15a (both in the 15" version and in the recommend sealed box). I know that SQ varies from my ears to your ears, but I just wondering what people think that have listened to both. I enjoy the 15a but I think that I can get something better. I know that both subs share a similar motors, but the coils and suspension on the RL-P are an suposedly an improvement over the 15a. I do not want to spend my hard earned money on a sub that will not be that much of an improvement. Thanks in advance, Matt

I just realized that I've never posted this over here. I put it one CA.com a while ago, but it would be nice to copy it onto this board, considering the content. So... This being my first sub box, I was a bit unprepared for fiberglass. Skin allergies and fiberglass fibers/resin/sharp points do not mix very well. Also, it

Hello everyone! Finally snapped some shots of our RL-i8 prototype driver. The finished product will carry a small centered logo. This driver will be one of the beefiest "little" eights out there, optimized for tiny enclosures driven with 175-500wrms. As we get closer to the final launch date for this 8 incher, more information will become available.. but for now, without further ado, the new RL-i series 8" driver from SoundSplinter :ph34r: .. B)

sup guys i'm new to the forum, i've been reading alot about SS and their P series line, i saw that their was a group buy for it, i was wondering how would these subs do in a ported box 6cf tuned to 28hz, i'm lookin to buy 3 of the 12" rl-p in dual 2 ohm, i will be pushing them with a orion 2500d so they will get about 700-800..... is this recommended.......

hmmmmm... betcha can't guess!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

wont the w7 only be like 1 db louder than the rlp based on xmax

You guys ever gonna come out with a 10" RL-P? If you did, i would be interested.

as i see mike floating around , i wanna try to hurry this up, first, the rl-i 8's are in hand!! yep, boots and all! (and urs truely gets number 1!! ) get ahold of mike and get ur's ordered today!!! second, the group buy as listed by squeak. there is a thread already here, check into it. third and most importantly...the LMT enabled drivers will be a reality. mike and thilo are still working out details, and mike will be posting more indepth info later, but know this...they are coming!! so if u wnat an 8...email mike! if u want a D2 rl-p, email squeak and vote in his thread and if u want an LMT..hang around a bit....they are on their way sorry mike..i just couldn't h…

I finished my box today for the rl-p. It took awhile but came out pretty nice. All I have to say is that computer guided tools kick *ss! I know the pictures suck, but what do you expect at 12:30 at night.

i figured out why my porn looked kinda crappy...it was the way i streamed it onto my computer...i did it again tonite @ 40fps and it looks amazing:D to bad none of you can see it, it ended up being 1.3 Gb :eek: but i captured a couple pics from the video that look pretty cool.....

2 ft^3 tuned to 28Hz with 30 in^2 of port area. Never took any pics of the build though Click on the pic for a bigger one. Still needs to be sanded off and finished. Used a mixture of glue and MDF dust to seal it up, works great, and so easy to sand. Need to fill the screw holes, and cover. This might turn into just a test mule box, not sure yet what I want to do yet. Here is the box design (Excel spreadsheet): Click Here Pr0n available soon.

hey i was just wondering how many watts rms the "Ultimate Competition series" is gonna be? and around how much is the sub gonna be??? have u guys decided any of this yet?