SoundSplinter

I cant access the website for some reason to get a contact number. Im interested in purchasing a single RL-S motor. Please let me know contact info so I can give you guys a call.

I wonder if there has ever been an Rl-i series 10" in a DVC 2 ohm or single 4 ohm? I'd about give my left nut to get my hands on one of these drivers to fit my application, so that's why I ask...

i got 2 15's on the way but i cant find the cutout dimentions anywhere. does anyone have it? and the outside measurement?thanks

I have had RLP 15 Sealed and Ported, SI Mag 12 ported and 15 sealed. Now I have the DD 9512G. I think I am getting too old to hit 145 with single 12 in the trunk. I am wanting to go to 2 sealed RLP 12's in about 2.5 or 3 Rli 10's in about 2.2. I have 2000 watts to spare and I want great SQ with mean kick drum on Metal, but also the ability to get loud. Is this gonna do it? Am I better off wit 2 12's ported at 1.6 cubes each for just a little bigger box? I just want it crisp and loud if possible.

I was wondering how much would it cost for two 12 inch RL-Ps to ship 39773?

Man you have the RL-i's looking so good that it is an injustice to the RL-p's. It actually looks like the RL-i's are your premium line. Of couse if this is gonna take away any time from the RL-s then forget it.......the site looks great!!!

well, i used to have a pair of the RL-i 8s, i wanted to know how the orphan 8's compared to the RL-i's, i was thinking about getting 3 of them, but not sure if they would get as low, pound as hard, get as loud and sound as clean as the RL-i's.

so i got a new box was siked balls to have the right box so i take it home all siked on it being loud as chit and it doesnt fit in the pucking trunk so im going to try and rip the ar apart tommorrow to get that bitch in there these are the new specs on the box 4 cubes at 28 hz w/ 55 square inches of port pounds good in the back seat lets hope it sounds as good in the trunk

Im trying to make plans i can take to a shop and have built. Never done this before. Im trying to get 3.5CF net @ 28hz (rec from mike). The program im using is bassbox pro 6. How does this look? Does it have enough vent area? Do i need to add braces or anything?

Car is a 1993 Nissan 240sx fastback, like the one pictured ...notice the angle of the hatch itself? I am looking to mount (1) RL-P15. Here is my question: Would it be worth it to try and make a box with an angle that matches that of the hatchback glass, so that it fires directly/evenly into the hatch? Or do you think it would be better to just go facing straight up? I COULD fit the sub facing back except I REALLY don't want it to stick out above my back seat, which it would.....though if facing backward is that much better I am willing to sacrifice. Also, is there much difference between 2 enclosures w/ the identical internal volume, but different dimensions? Thanks in a…

A buddy of mine will be ordering a pair of these when his tax return check comes in and I plan on building him a box during spring break. The subs will be powered by a Hifonics BX1500D and will be in a ported box. I plan on doing something very custom. What I want to do is put the box facing the cab and use pieces of wood to seal it off from the trunk. The back seat will have holes in it and grill cloth over the holes. The ports will be dual 6" pvc ports and they will be firing through the holes in the rear deck for the 6.5's. These will have a baffle over them and will also be sealed off from the trunk. I was wondering what airspace you would recommend and what tuning.…

need some box help gonna be building my first ported box i listen to mostly rap and from what ive read i should go for like 8 cubes tuned to 32 does this sound right

Hey there... I ordered an RL-i8 from the SS website on the 26th, but haven't received a paypal request or any other emails besides the automated bill #. Who will get in touch with me about completing the order? Thanks!

NOT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! well what did you expect?

hey, i am going to build one more box for my 12 rl-p. I currently have it in a box that i believe is around 1.6 in low 30's, but it seems like it has a little port noise. I tried around 2 cubes at 30hz, and it seemed to lose some output, but i only had 1 4" port. Anyway, i am trying to figure out what to do now, but my main question is: How wide does my port need to be? Is a 2" slot port that is 14" tall good enough? it is way more than the required 20 sq in of port area. Also, if i do tube port, is one 4" areo enough? It is only like 14 sq in so i figure it probably isn't. What would one recommend for a tube port? 3 3"? 1 6" would be awesome but insanely large…

some crazy things are goin through my head right now.... :ughdunno:

I have two Rl-i 10" drivers, and i was wondering if anyone here has ever put one in a ported enclosure.

I was looking at the enclosure recommendations for the Rlp-18 and I was wondering, If I had enough room for an enclosure that was 26'^3 for a pair of rlp-18's would it be to big for the subs? What would the response be like I want it loud, with an 18 I know it will get low. with an enclosure that large where should it be tuned, around 30hz or lower?

I have an 18" RL-P I just bought....im about to be installing it in ~5 cubes sealed on my 20.1 @ 1 ohm.....i think the sub is rated for 500-1000 RMS on sound splinter's website...do u think it can handle the 20.1 or is that too much power?

Hi mike I am looking to see if you had any Rlp motors hanging around with triple .75" slugs? I am building a lms 10" and am hoping to make a matching driver but cannot find a motor to save my life I'd like to buy one if so. Please send me a message with contact info Here is my motor I am looking to match

i just recently got a rli8 i want to build a ported box for it tuned to 33 Hz... ive found a few calculators online, but i think i might be entering the info wrong. can anyone draw me up a quick build for it... or link me a easy calculator to use thnx

trade me an rlp 15 4 ohm for my 15 h2 i'll pay the shipping

sorry for double post could you please delete this one thank you

Linear Motor Technology - A Reference First Looks: RL-s12 & RL-s15 LMT's Specs: RL-s12 & RL-s15 LMT In Motion: RL-s15" LMT RL-s early review Guess what i got.... Has anyone bought an RLS? As time moves on, more links will be added. If you have a link you would like to include, please post it!

I was in the middle of insulting the spam bot, and a mod deleted the thread. It was going to be epic in a stereotypical white boy way.