SoundSplinter

the MAX size box i can fit is 3.2 cubes before any displacement. i REALLY want a ported box but i dont know if i have room or not. if i go the 8's will they be loud? or will they just be like....keep up with the music loud? i figure the tens will of course be louder....correct? anyone care to hop on aim that has personaly play time with both?

Hey everyone. I have a sealed enclosure with 1 SS RL-p 15 d2. The internal air space is 2.25 cu. ft. I have a Directed 1500D hooked up to it putting 1100wrms @ 1ohm It sounds amazing now that I set the amp up properly. I'm very happy. Now to the question: I have two 1 lb bags of poly fill. By tossing both bags in the enclosure it would trick the sub into thinking its in a 2.7 cu. ft. box (round about). I was wondering what effect you think this would have on the sound? I don't want to pull my sub out and try it if its not going to do anything for my setup. What do you guys think would happen sq wise and output wise?

Everone (sundown, mach5, etc) now adays is making a super woofer, and I was just wondering if you had any plans in the works? I've always loved your subs, and I would defenatly be on that list, LOL. :bigclap:

a happy face!!! is that possible mike?

Okay, so my friend just got his ava 18 installed and its purdy loud, I've liked what I've listened to so far. Its on about 1000/1200 RMS. My question is, to get louder should I.... Get an MT 15 ported on 3krms or Get two Rl-p 15s ported on 2krms Also, its pretty much a given that either of those would be louder than his 18...wouldn't ya say? Propsed box for the Rl-P 15s is a true CRX style box, two chambers, subs up, ports back, 2 4" aeros per chamber, 3 cubes net each tuned to 34hz I dunno, when I think Dual 15s CRX style in a hatch...I think LOUD. Thoughts/opinion/ramblings. Just respond...I'm tired...intoxicated, and about to pass out. Yet I still post...YOUR TURN

Ok this might be a little long but here goes. I finally put in my RL-P 15. The enclosure it went into was a 2.0 cubes sealed afer displacement.. This sub is also being powered by a crossfire vr1000d at 2 ohms putting out about 500-600 watts. I set my gains with a MM and then proceded to go ahead with testing. I went on a 1.5 hour drive, and basicly went crazy with the MP3s. I am going to start off by saying this driver is completely amazing, everything I threw at it was down right accurate and loud. I started off with some rap, tracks like Trick Daddy - Let's Go, Trick Daddy - Sugar, Lil' Jon - various tracks, and Busta Rymes - Put Your Hands, St. Lunatics - Midwest Swing…

Hey guys, I'm new to this site. I'm about to buy an RL-P 12, but I'm not sure whether to get the D4 or the D2. What's the difference? Does my car have anything to do with it? If it does, I drive a 2000 Toyota Camry. Also, the amplifier that was recommended to me is this one = Audiobahn A8000T, is that a good choice? Also, I need a box for it, what would be a good box to get? Is it hard to build one? Thanks a lot guys, Chris

so i've had my RL-i 10 laying around long enough, it's been too cold to be outside working on a box. so later today when i wake up, i'm going to start cutting the

would this amp over power 2 of these

which amp would you guys reccomend to power my 12" soundsplinter rl-p d2 i was looking at the Phoenix Gold Xenon 1200.1 but then again i was looking at the Diamond Audio D61500.1 if anybody could lead me in the right direction to what amp would help my woofer sound great just shoot thanks in advance

Hey, I am looking for my next up front sub. Need to run a small box of course and I have been running WinISD charts of these subs: RL-i8 RL-i10 Image Dynamics ID8 d4 v.3 Dayton Audio 10" TITANIC III A Qtc of .71 is the goal. CHART#1:RL-i8, ID8, 10" TITANIC GAIN CHART: RL-i8, RL-i10, ID8 SPL CHART: RL-i8, RL-i10, ID8 I have about 280-350 watts and already have a .25 cu ft box. This is about as big as I want to go upfront. Looks like the ID8 has the potential for good output with my power but the RL-i8 & Rl-i10 are more in line with my box size? May try another box program. Any thoughts?

First time poster here with a question about the RL-P. I have entered the market to find a new sub after a nuked my old school round solo(12 inch D series, had it less than a week bought it brand new never used). I was floating around the caraudio.com forums and saw many people talking up the sound splinter product(I created a similar post to this over there today and all repsonse have been very positive) so I checked out the web site and came away impressed, yet looking for more info. Basically I just wanted to get some opinions as to how this speaker compares to my solobaric. I went with the solo because I loved the small sealed box design. I want my system to sound go…

Greetings all! After a couple of weeks wading through our terribly disjointed website code to refresh our look and improve the ability to add future content, the streamlined design is finally back online. A week of jury duty in between didn't help matters progress on my intended time table, but things are finally stackin' up and business is back on track. Check out the new WebSite (feedback appreciated!) RL-p18 now available in both dual 4 and dual 2 ohm Price reduced on our RL-s12 from $499 to $449 ($409 per unit when ordering two or more) TeamToxicBass is using our RL-i8 drivers for ongoing promotion: Check out Project Hellboy Just wanted to keep the loyal fans (a…

Allright so I just managed to get my hands on 3 more rli-8's so that brings me to a total of 5 now. Wanting to do a build with them but not sure what size boxes these subs like. I can't remember the size of the last box I had the 2 in but they sounded awesome. Ported tuned low and they will be powered by a sundown 3000d Thanks

Well, I got bored with my trunk. And since I'm currently waiting for my head unit to come back from warranty, I decided to redo my trunk. I don't think i'm going to make it look "as" presentable...but more on the functional side of things. Anyhow...I was itchin to go ported for some time now, and I think I'll follow through this time. I'm going to make a 2.5 cu ft tune to @ 30 hz using two 4" aero ports. Yeah the box may seem a bit small for a ported 15, but it's still within the sub's recommended box volume. The box won't be as deep as my old one...in attempts to get back some trunk space. Heres what it looks like before: And now...after today... Front baffled remove…

First of all I want to say thanks to Mike for kickin ass and I love my RL-p. So I have an RL-p 12 in a .55cuft net sealed box (its inside the cab of my car behind the pass seat, I hate the way trunks make bass sound muffled and quiet). It's running off of a PPI 2150 (about 500-600wrms). I had a local high end audio shop run software for this sub (and confirmed their numbers with other internet sites) for a Q of .7 Seeing how that is what most sq people rec I went with that. My question, the speaker seems to distort when driven hard and I'm trying to figure out if it is the speaker distorting or the amp clipping. Freeair testing this sub it looks like it can move way fart…

is that to much for the 8's 2 cubic ft at 34 hz. if not which amp would you guys recommend http://www.subwoofertools.com/forum/ported...mp;Fs=&CE=0

how many watts can thse subs handle? its only singe voiice coil 3.5 can the sub produce 1 ohms

I'm trying to understand ported boxes and trying to find somthing i'll like for my 12" RL-p D2 thats powered with 600watts. What would be the difference between a ported box that is 1.75@32hz VS one that is 2.0@27hz? or one that is even at 2.0@32hz? Which one would u go for? I'm confused with box size and tuning freq. Thanks for any help you may give

I first built this box about six months ago. But when I slid in the box, I noticed that the back seat wouldn

but I am not at liberty to say yet, I would rather Mike release the news himself, its top secret but the inside word is great, def a nice improvement on the SS subs

ugly ? yes, ghetto, yes sound good yes, all came out today to go in the new ride?....................yes. :dancingsmilie: :musik05:

OK, these are crud MS paint drawings, but you get the ideas, lol. I plan on starting this tonight. I'm just not to sure which one to go with. 4 6" flair ports, or 1 big slot port. I'll get more port area with the slot port, but I do have 4 6" flairs sitting here as well. On to the specs & drawings. I used bcae1.com for my results with this. Click on pix to make them bigger. Slot port specs & drawing 6" Flared ports specs & drawing What are your thoughts? Should I go with the obvious, more air space with the slot port? Thx for the help & input guys.

Well im pretty much stuck between either the rli-10s or the rlp12s. I was just wondering if the 12s would be too big to put in my ext dime? I want a good mix of SQ and power without having to put in bulletproof glass. I have an amp picked out for the 10s, a pheonix gold x600.1 but I dont know what I would power the 12s with if i decide to go the route. Thanks.

this thread is for those people running a rl-p 15. how much power you feeding it? how big is your box? whats it tuned to? a brief review would be nice. like how it responds on certain music.