US AMPS

RE MT 18 ? dayli or spl where buy RE XXX 18 that is more expensive thanks

Hy, on my XT4000 box it says CEA, is it CEA rated? It is an US Amps, not the new RE Audio XT4000.1. I want the CEA ratings for this amp please.

I had a AX5600 in my car being ran active off a 9835, powering ID OEM mids, Hybrid L1 tweeters and 1 12" RL-p. I've pulled that system out to use the 9835 and amp in my dad's F150, but I'm probably going to stick with some passive TypeX comps in there and 2 E8s under the seat. My question is, are the AX5600 speaker channels bridgable? I'm going to run some old Type-R coaxs off the HU for the rear, but want to send the comps more power than just the front channels. Thoughts? Next, I'm picking up an XT800.2 and two XT800.4s for my car. I'll be running the same L1s, but pairing them with new 2ohm versions of the OEMs. The RL-p is going to be ran IB. I plan to bridge one of t…

I have a md 2d but i don't know how to set it. i don't know what the sub sonic and lpf does. could tell me a step by step to set it?

I have been looking around for information on this sub, but come up with nothing. Not specifications on it, but whether or not I can run this in a daily setup. I know there are a few people who do run these daily, but those are the larger sizes, 12"s, 15"s, 18"s. I have never heard of anyone running a 10. Would it be fine for daily use, or is it similar to the old BTL 10" to where it was solely for burping purposes? Any help would be great appreciated

My cousin finally let go of his AX1000, so glad I got it Very excited Im running a Fi Q off of it and compared to the power I was previously giving....WOW...just....WOW. So clean and very crisp. Can not wait to do some more testing tomorrow

Hey guys I'm in a tough situation needed some advice. I'm changing my sub stage in my Nissan Titan Crew Cab to possibly (2) RE SRs 10's sealed. I currently have a Elemental Designs 9.2x. I was thinking of going with the MD2D or a Diamond Audio 1200.1 in place of my 9.2x but I spoke with Us amps tech support yesterday and they are rude as f@#k. One guy did not want to answer my question and they other guy kept sending me to the website for answers. So for you guys who have expirence with US amps what do you think of customers support and your product. I'm not a basshead by any means maybe more of an LOUD SOUND QUALITY guy but I like stuff that most people in my area will …

Picking some up this weekend, just need some info on them in terms of SQ, output as its been debated on forums and I am totally clueless with Usamp amps as I have been a Trutech Hammer fan all my life. Any info/views ?

Ok so i'm changing the substage again. I also changed jobs. I work for a shop now that sells mostly cadence and RE/US Amps. Mainly RE for subs and cadence for mids and highs. So i'm looking at a system rebuild. Probably XXX comps for my Mids and hi's I only have a front stage. Gonna leave the Sundown SAX100.4 on them for the time being. So heres where it boils down. I'm looking to make some NOISE minimum 150s but be able to blend them into the system as well for daily driving. I'm looking at either 2 SX 10s or possibly 1 XXX or MX 12. My car really doesn't want to handle 2kw daily but we gonna make it work. Getting at least 1 kenetic 2400 probably for the ba…

I have this amp and it worked well until i let my friend borrow then i got it back and it doesnt produce any sound. The first thing i noticed when i turn it on is that it makes a clicking noise. I know what makes the noise its the black peice in the picture. it powers up but no sound comes out. What is THE piece and has anyone had this problem also is it fixable? I also noticed that if i set the input voltage to 9.6volts it wont make the sound, but when i turn it up above 9.7 it clicks. even at 9.6 volts it won't work. Also it only makes one click like a fuse and makes it when i turn it off. Also the little white thing in between the 2 big black circles, i dont know what…

What makes a AX2000HC worth $1000 more than a AX2000? I know that volts x amps = watts. I have been told that a AX2000 produces 600 watts at 4 ohms and that a AX2000HC provides 150 watts at 4 ohms. I don't understand. Does the High Current amplifier have a extremely low voltage? Does the AX200HC have a much better power supply contained in the same size package? What IS the difference? I know from experience that US Amps builds a heavy duty amplifier, but specs don't help me understand what I am getting for my money.

Okay looking into the US AMPS MD 2D. I see that it does 1500w at 1 ohm. I need it to power 2 10" Fi SSDs. Will the MD 2D actually produce 1500w at 1 ohm?

this is probably dumb but this is my first us amp and i noticed that on my md1d there are 2 channels even thought it is sold as a mono amp. my question is most amps i have owned had the bridged output marked on the amp. this one doesn't. can i just use a positive off one channel and negative off the other? does it matter which? thanks in advance for helping the newbie.

hi all i would like to know if a recone kit is available for an 06 RE XXX 12 i live outside the us and shipping the woofer back and forth would cost the same as buying a new one reason i ask is cus some jerkoff was fiddling with my suspension when i wasnt by the car so i guess im just being cautious ... im monitoring it to see if any tears or cracks develop any info would be appreciated

Wondering if these specs on this sub is available. its a dual 1.1 Electrical Q Value -Qes: ?? Mechanical Q Value -Qms: ?? Total Speaker Q Value -Qts: ?? Free Air Resonance -Fs: ?? Hz Equivalent Compliance -Vas: ?? liters One-Way, Linear Excursion -Xmax: ?? mm Efficiency -SPL 1W/1m: ?? dB SPL Effective Piston Area -Sd: ?? cm^2 DC Resistance -Re: ?? ohm Nominal Impedance -Znom: ?? ohm Thermal Power Handling -Pe: ?? W Force Factor -Bl: ??

does anyone know where i can find a shirt for re audio/ usamps? thanks in advance

Does any one know what the real outputs are for the vlx-400 at 1ohms on 14.4 and 16 and can it take 18v? I have one I am either going to use or sale I have had it for sale for sometime but no body buying in this market so I might as well use it. Someone said it needs like 350amps to run good is this also true??

Read the rules please!

Hi guyz, Went to the US Amps website and those appear to be new products. Anyone care to explain what those are? Specs appreciated XTV2 VLX (supposed to be an OS amp, maybe coming back with upgrades...) Thanks, Kelvin

I was wondering if anyone has had any experience with these. Pros? Cons? Are they worth the money? If not what would you recommend. I listen to mostly, hip hop, electronic, and funk. All opinions will be appreciated

will md3d's work on a 16v system? do they need to be modded? please let me know, running 4 of them to 8 RE 15's in an astro van, upgrading battery/electrical system and would be nice to know for planning. Thanks! Greg

what size power wire would the md2d take cause i have a Rockford 4 gauge now and i want to know do i need to upgrade to a 0 gauge b4 i get the amp if i don't have 2 i wont so plz help

I Have A MLT setup and I want to know the advantages of this setup.I have two md3d going to two 13w7's. Under this setup I have one md3d going to my subs and the other is a slave amp.The advantage I have with this setup is I only have to play with one gain on the amp which is good and also when I had played with both amps before I have to make sure that both amps were even on the gain so the subs would move the same.Now with the new setup the subs are more even when they are under excursion so better sound.It seems that the subs hit harder and cleaner. :bigclap:

can an re 15 be used for daily sub if so what would be the recomended rms power and sub box

I have two of the 2004 model MD2D amps and was wondering if they were strappable or if it was a god idea to do so? I'm planning on running them on two Orion H2 15's with dual 4 ohm coils. Would i be safer to just run each amp to a single sub?