US AMPS

Bigg Boy at ***** Audio benched with an o-scope on a current XT4000D: ^^^ there you have it and thanks a lot!

Hey was wondering if anyone out there has some recommendations regarding enclosures specs for two RE MT 12 for daily use. I've read other post that say to use the information stated for the MX12's as a guide. Also is there a set limit to the rms these speakers can handle.

I still have credit at a car audio store that sells re audio, and when I asked if my 18" mx came in yet, the store owner said that they stop making the MX bcuz there are new products coming out!!!!! Is this true???????????? Didn't see anything new on the website, but it usually takes a while LOL

Hello So people are saying the 2007 MD series are the same as AX series.(Is this true) Can someone explain. I also keep hearimg the 2007 MD-2D and MD-3D are underated but not MD-1D.(if so whats up with that) Thanks

I want to fit better quality tubes to a TU-600, do I need to re-set the bias/plate voltages or are the pre-amp tubes auto-biasing? if so where to I tweek the levels and where to I measure. thanks.

what are the actual specifications for these two amplifiers? i keep seeing different ratings from different sites. even from the thread on here compared to the us amps site. lookin for the stats on paper.. not how much they put out when they were benchtested, i know theyre underrated.

How good is the build quality on the xterminator series of amps? Thanks

I recently acquired a AX-5600 but did not get a RBG nor the US AMPS decal that goes onto amp.......I would like to get both somewhere......and cord to go with RGB unless it is universal item like phone cord which some are...... Can anyone help??????? Flakko???? Thanks in advance, DC

Hi there, I'm new to the forum (registered a while ago - but this will be my first official post), and I thought it'd be a good idea to show you guys what I've got. The internals of the 1100T I know it's identical to the new DE-1000 ...but this is the model no. Some random pics: You guys obviously know a lot more about them than me, and I was wondering if you can tell me it there are any differences between the two of them, as I can't find any online specs for the 1100T? I'm using the amp to power 2 x Solar Audio HX 12" woofers, and I'm pleasantly surprised by its power. Before this I had a local branded 6000D monoblock that claimed 4500WRMS, but had nothing on the …

My friend has the us amp Merlin md3d... He got it not too long ago perhaps last month for 400.... now i want to get it.... he said to give me my AQ. and 150... Should i go for??? This is also the friend that i sold my lv4 too.. I am going to get it back... I want to go back to my high school and win the competition they have.. ha ha... okay the comp. is not real legit. they do it by ear ... and stand like ten feet from the vehicle... and there mostly are trucks.. so it will be just a bit harder for me... Not sayin this is true... and i think they will be biased considering the some of the people that go...they think kicker or lanzar are the best thing out there...…

I was wondering if the MLT is available...

How can i strapp 4 of these beasts to a nominal 0,25 Ohm impedance on a single super battery only for burps? I'm thinking of using them on my Street max 1-2 setup to replace my 2 USA 6000. Is it safe?Has anyone done it?Is there any strapping diagram available?

I would like to know the rating's on this amp. All I can find is 2000x2@2ohm and 4000x1@4ohm What does it do at 4ohm stereo or can it run @1ohm stereo?, Does it really put out 4000 watts, and what voltage was that. here are some pictures. I have 2 of them. If you could help thanks!

What's the bigges guage I can shove into the MD2's outputs with out having to trim the wires? I gotta know when I go buy power...err speaker wire.

yeah, i let my buddy borrow my 600x and now it wont turn on.. nothin on the board looks cooked... flacko get at me, i'mma have to send this sucker in for repairs.

Get me stats for the Vl 200 please since asking over the phone and waiting for an answer will get you old, and possibly dead, long before an answer. Trying to sell the gd thing. Thanks ahead.

I have a US Amps USA 800 pushing 4 15's I also have 4 Zapco C2K 9.0's in the closet, My ride has Zapco on the mids and highs so I am going to put the 9.0's on the subs. I think the information on this amp(USA-800)is interesting for those browsing this forum and I'm checking to see if there is enough interest to warrant selling it. The following is a portion of the ad from when I purchased the amp. -------------------------------------------------------------------------------------- Here's one I'd be tickled pink to find under my Christmas tree...one of the original 50 US AMPS USA-800!! This is THE bad-boy cheater amp, with sound quality creditials. Truely the absolute be…

RE AUDIO MX12D2 12" Anyone have any input on this sub? Thinking of running 1 in around 2ft^3 ported with maybe a BXi1610. Any thoughts?

Are the amps that were shown at CES going to be released? Namely the merlins that are going into the old school looking sinks. I've been holding off purchasing my amp because I'd like to get one of the new merlins when it comes out to power my substage

Hey guys I need a little help.... I used to be able to flick a switch on some amps I have had from playing just lows (bass) then flick the switch and there would be highs comming out of the sub. SInce I have used D class mono amplifiers, I have not seen this feature anymore. I was told to look for a class A/B amplifier, but I purchased the usa-1000 and it did not have the feature, yet it was a class A/B. Wat is it I should be looking for? I need 1000 watts rms @ 2 ohms minimum.

Why the price increase again this year on the Usamps and RE products? I was looking at bringing in USAMPS Xterminator series but they have gone up.

I was wondering if anyone has had any experience with the MD-3; is it worth the money? And if so would it be a good match with a 15 fi btl?

Was just wondering for a future reference if someone around here asked me...

I have always regretted selling my 2 US amps T700's and when I got the chance to buy a 400x & 600x I took it....I havnt got them yet but I was wanting to run them like so... 400x bridged and running a JL Audio 10inch..model # unknown...its in a wedge box they made as a unit I think.... 600x running 4 coaxials for a 2ohm load.... or should I swap them around? I dont want the sub to overpower the entire system...and I dont want to add another amp either... what you guys think? these are still good amps made in USA I hope .......I know US AMPS has undergone many changes....

Is there any way I can get schematics for an old USA 2000X, USA1000 and USA-150? they all need repairs and being the other side of the pond in blighty I'd rather repair them myself. The USA 150 has smoked some FETs and PSU diodes. The USA 1000 cuts out intermittantly (could just be a dry joint) both those have been abused a bit in the past (not by me, I'm trying to bring them back to their former glory and give them a good home) The USA 2000X was reverse polaritied by a moron (along with the rest of my car when he tried to jump start it) and now has PSU/system noise appearing on the audio, probably jsut a diode gone somewhere but schematic would make it somewhat easier t…