US AMPS

I've never seen this one before. not mine by the way just thought it was saaweet http://www.caraudio.com/forum/showthread.p...070#post4214070

i just wanna know if the xterminator series amps that can be found pretty readily on ebay http://cgi.ebay.com/US-AMPS-XT2000D-xTERMI...1QQcmdZViewItem are solid for the amount of power they put out? i know they dont do the bolstered claims that you see but thier actual power and build is it good, clean, reliable? or is this amp just nice looking trash all the way around? i did see the video of the guy explaining how the numbers are "raised" so that average joe has no idea what his amp is actually doing. anybody here owned one, or had experience with them? thanks for any info . i am not trying to diss us amps( i own two old school ones 400& 150) but do these newer ones…

I'm getting a VL-50 and I need specs. Thanks

^ ^^ ^^^^ ^ ^ ^ ^ ^

Are these amps 2 or 1 ohm mono stable or would I be pushing it. I believe the 150x puts out 500x1 at 4 ohm bridged. Can I bridge it down further to 2 ohms or am I asking for trouble. Any input is greatly appreciated. I was also considering using the us amps optimizer with these amps. The 100x would power boston pro60 3 ohm speakers in stereo. The 100 would power boston pro6.5 in the rear in either stereo or mono, probably stereo. I was looking at picking up a 8'' sub and running it at 2 ohms off the 150x. Maybe a 8w7(3ohm i think), tc sound, fi, or soundsplinter. Am I asking for trouble? or can these works of art handle these loads all day long? This is all going…

If anyone is close or wants to know there is a new US Amps Dealer,and Re audio located in shawnee oklahoma Custom Situtionz Phone 405-878-1441 check it out if you guys are close to it

OK I have a old USA-3000 I am looking for any info I can get on the SAT LINK I have the software but need to know more about the wire or interface that connects the amp to my lap top. Also I am looking for a copy of the manual for the 3000 I need a Badge (OLD SCHOOL STYLE) and the original style bass knob. I also need to know what Resisters were used in the US AMPS USA model the little blue ones that are right next to the GATE RAIL'S (Every US AMP has these Resisters) Yellow,Purple,Green,Gold,Red are the 5 strips and the part is lite blue and very small. Also how do I disable the amp from turning it self off? I have heard that the SAT system with out being plugged in can…

i was just wondering can the old 1999 us amps 400 be modified to do 1200 @1ohm bridged instead of its factory setting of 1200@2ohm bridged? just curious. i have read about people having amps modified and was wondering about this one. thanks for any info.

Hello When will the 2008 be out or are they already out? And what will be the difference between the 2007 and the 2008 merlins calss D amps? Thanks

I just got one of these not too long ago and finally hooked it up to my VLX-400 and my USA-150. Now my question is the setting of the "gain" on the crossover. From what I understand in the 2000 manual, that knob controls input voltage to the the amp from 0-9 volts. I have it at 3/4 on every channel. I didn't have time for long term testing and nothing sounded distorted or anything. I just want to make sure I'm not going to damage my speakers by having it at that point. So my question is, it it actually a gain knob, or does it act like a line driver and just increase the voltage while turning it up (obviously unlike a line driver, it is not adding voltage to the 8 vo…

somebody got pics of the guts i may be getting the amp in a week or 2,all they got on realm of excursion isthe 05-06 models

OK I have a old USA-3000 it still works however there are four burned up resistors right by the power supply they are M106 M107 M116 and M117 they are light blue and have five lines on them Red Gold Green Purple and Yellow I looked at the amp guts site and every amp that us amps ever made while they were in Florida had this resistor in them. Does anyone know why they are blown and if I can just replace them and not have to replace something else as well? also does anyone know what value these resistors are so I can buy new ones?

Hey guys what are the real Dimensions ofthe 2007 US Amps Merlin Series? I'm interested in the MD-3D and the MD-21 but since i'm tight on space i wanna know the real Dimensions before i buy. Here on SSA I've seen that the MD-21 WxHxD is 7.9 x 2.5 x 8.75, on www.woofersetc.com I've seen it the same, but on their website it is WxHxD is 10.5 x 2.5 x 10.75.(now what?) The MD-3D here on SSA it is ?? x 2.5 x 8.75 WxHxD the W is unknow( wich in my case it's very important), on WoofersEtc.com it is WxHxD: 13.8 x 2.5 x 8.75 and on their WebSite it is WxHxD: 21.75 x 2.5 x 10.5, now I'm very confused and i realy need to know the real dimension mainly the W(L) thus how long they are…

Does anyone know where I can find an owners manual for this amp? I find conflicting info about it online.

To get the best sound what is the difference of gain from 15 HZ to 40Hz. Putting the gains clockwise would be the best choice right, closer towards 40 hz. Do to the type of of install I have it is very difficult to work on my gains.My space is limited to work with.

yea i hope you all have a great time with loved ones. Merry christmas peoplez and thanks for supporting usamps through the thick and thin. :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa: :santa:

I need some info on what the knobs do on the side of my VLX-400. LMK guys.

how does a Fi BL 12" fully loaded with a Md1d amp sound? sounds nice to me... but do you think i can go bigger?! md2d?! or probably too much power? any suggestions?

does anybody have the original specifications to it,flako?since i believe yall are sorta with re could u ask in the shop,i bought one 175 shipped and just want the orignl specification,they are no where to be found since its a old amp,dont know when they were made tho

Hello So people are saying the 2007 MD series are the same as AX series.(Is this true) Can someone explain. I also keep hearimg the 2007 MD-2D and MD-3D are underated but not MD-1D.(if so whats up with that) Thanks

I just recently got a US Amps VLX-200 and I'm working on a USA-150. I really liked these old amps from the first time I saw a USA-400. What I wanted to know was, is there anywhere I can get information on these amps (like a website). Also how hard are these on electrical systems? I'm going to be running two amps and a XM-6 Crossover and I'm concerned with my setup. I have the 3 big in 1/0, 140 amp alt. and a really good wet cell. I didn't really dimm @ full volume with a Sundown 1500D and a small four channel, but the VLX is huge. Well LMK guys.

I have a old school u.s. amps VL-400 It recently fried due to lack of sufficient power. I am wondering if it is possible to get this fixed , looks like it needs a new board to me. Also does anyone know the specs on this amp? ... i have looked everywhere . I havnt even seen one on ebay (previous owner did the "custom" paint job. ) it used to be purple.

Date: November 30th 2007 Time: 2:00pm - 3:00 pm Place: Usamps 315 Cloverleaf Dr. #K Baldwin park CA 91706 Proposed Schedule: 2:00-2:10 people arrive and introductions 2:11-2:20 Show people around 2:31-2:45 bench test some amps XT4000D, MD2d, MD43, AX5600, AX3200DE 2:46-3:00 Q&A More details as the time approaches, but there WILL be Q&A so if you can't make it, post up your questions (get down and dirty) here and you will be heard! Also feel free to let me know if yall are able to come or not because it wouldnt be a tour without the people! The more the merrier! that is all for now, and hope to see you there!

after 3 years of asking it finally shows up:

I absolutely loved the old school USA-2000 I used on my front stage at 8 ohms a few years ago. But, now that I have sold all four that I had (like a nutcase!) I am interested in what would be as good or better in the near future. I am considering switching to a 4 ohm load so I am very interested in the old USA2000x. My questions center around comparing these models to some of the newer lines. Would I be better off with the amps mentioned above or something like AX-1000, AX-2000, MD23, or maybe some similar 4 channel models bridged to 2? I have been thinking old school the whole time because I haven't kept up to date on the new stuff enough to know how it compares. T…