US AMPS

RE MT 18 ? dayli or spl where buy RE XXX 18 that is more expensive thanks

Hi there, I am trying to locate a part for my AX-TU1000c. I got it used and the 4700uf caps were bad, one was detached from the board. Also the pin headers were cracked on the tube board. I recapped most of it and replaced the pin headers but I need a couple parts. The previous owner busted a speaker block and tried to solder it together. I'd like to replace this but its very hard to find this part. Does anyone have any idea where I can find this PCB Barrier Terminal Block? (other than buying a parts amp) I could use a rca PCB Mount A/V Concentric Outlet too. I did test the amp removed from the heatsink and it is working af…

Does anyone know ANYTHING about this amp??? I have been looking and cant find too much info on these at all. I know that it supposed to do 3k @ 1 ohm, but thats about it. I have an opportunity to get two of these blown (not burnt) for a really good deal but I need to get all the info I can first. I also want to know if these are meant to be run strictly at 1 ohm or can it go down to .5. Any info good and bad will help. Thanks

ok guys here is the deal i have 4 us amps i am going to be installing in my jeep and i need to know what size fuse to put on them i have (1) 4300X (1) 4260 (2) PT-800 what i would like is the fuse ratings for all of them and a suggestion of what size fuse i should use on my power wire to all 4 amps. i am pretty sure the fuse rating on the 4300X is 60Amps I plan on just adding all the fuse ratings up and getting a fuse about that size. thanks -=ScottY=-

there was a mention of input sensativity issues on TP about the IS's, someone said anything more than 4 volts could cause problems? is this true?

I've got an offer for a brand new MD.23 for $250 shipped....I'm guessing it doesn't have a warranty..? How do you US Amps hold up? Do they tend to break down a lot or are they pretty stable? I would buy with warranty but its almost $450 more than this guy is offering for from my understanding...the price of an extra 2 non-warranty MD.23's. Does anyone know where to get these for significantly cheaper than $700 and still have a warranty? Regardless of the warranty, how do you like the Merlin line itself? Is it a big step down from the AX line? What other company's amps does the Merlin line compare to? Have any of you guys used the MD.23, or are you familiar with it a…

i could get an older usa-5600x for a good price, should i get htat, or save up for an ax5600?

its goin in an suv i just wanna know what a good size ported enclosure would be as well as frequency for tuning since i cant find there specs from that far back

Steve Meade stopped by with Mark and we did this quick video.

How good is the exterminator line amps and do ther do their rated power

I took out my old PG Xenon 1200's and puttin in two 07 MD3D and man my subs love them and they are powerful.This is my old setup with the Xenons and now with the US.Man I am pretty happy with the new amps My car is under gallery section under Ultimate Atima www.Audio2000az.com

I have had this amplifier for a while now and was actually unsure of the real specs when I purchased it, just was convinced it was a solid amp. I have searched everywhere to find the numbers but I find different numbers everywhere. I had a bench done and the power supply cut off before it's full potential (I am guessing). Just wondering if anyone has run a proper test on the ax3200de specifically (not the ax3000) and has some power ratings, damping factors, etc... Thanks

How low can a MD2 get? And power it will be putting out?

what is the ohm load thay will take. what kind of power do thay do.thanks clarence

USA 800 Did they come with a X-Over new I have heard there were only 50 produced is this true and if so was it in 1999 roughly.

Trying to decide for subs.I am going to put one to a (two subs two amps) 13w7.What is the difference between the merlin and the Ax line, I know that the Ax line is the top line but how comparable is the merlin line

I've run the ed's before and they are solid and seem to be a great value. Looking at the IS 2080 for front comps and the 2200 for subs or the ed nine.2 and nine.2x. What do you guys think? The setup will be CDT EF 61 Neo comps up front and 2 10's sealed but not sure which ones.

Hey, US Amps owns RE now right? Question on an RE purchase: I found one of the SX models on eBay for $209 while woofersect.com costs $420 on sale http://cgi.ebay.com/RESONANT-ENGINEERING-S...1QQcmdZViewItem Is this just because there's no warranty and it's a shady dealer? or is this an older model possibly? Thanks for any info

Hey by Jan 2006 the new website is hopefully going to be posted up. Ive seen the basic layout, and i must say its very nice. there is still time, and i was wondering what you pple would like to see on the site. here are some ideas to start off: More specs on amps (Dimensions, Crossovers, etc.) Install Pictures In Depth pix of the amps Descriptions of the amps .... feel free to give your ideas!

Does any know if US Amps does direct factory sales? I'm some what close to US Amps and I was wondering if they sold to the public from factory. How would the price be like? Thanks

hey guys i just bought a DE-1000 but it did not come with a bass control or the usamps logo. Where can i buy these?? also does anyone have the specs to the de-1000? i posted in another thread but i didn't get any replies.

Not sure what the deal is with this guy. But someone at Us Amps may want to look into it. I tried contacting them multiple times, and sent emails, but haven't gotten a response. So hopefully I can get ahold of someone here. http://forum.ecoustics.com/bbs/messages/4/356768.html Feel free to delete this thread after the situation is taken care of.

Is this amp still made? if so where can I get one? and price on it?

I see two different md2s' One says "Merlin MD.2" and has all of the connections at the bottom of the amp on the long side The other says "MD-2D" and has all of the connections on the right end of the amp (this is the one on the usamps.com site durrently) The power ratings are identical, but there is no way that with all of the radical differences they are te same, one has to be better My questions are these; What are the differences (is one like a 5 year old model and the other current?) And of course, which one has more power! (do they exceed rated power or just meet it? at 2 ohms specifically), Does anyone have specifics or no? And what else about them should one know?…

has anyone used these amps how are they performing making rated power?