Build Logs

Hey y’all friend wanted to add some bump to his truck so I suggested some Soundqubed hds2.108s. He got them on sale so now I’m gonna go ahead and attempt cool build.

Here we are peoples. The build some of you are waiting for.................. This will be a three phase style build. I will be competing Street Stock at first, then I will switch up to SS NW, the SS 3-4 for the DBdrag sanction. We have here a 2003 Yukon XL that has been Deemed(by me) the SSA YUKONVICT. ^^^^^^^^^ LAST SEASON New Season - New Truck Gotta get them Stock boys off there Much better but needs new tires Those are for the Winter Stock tires the Deuces will get them over winter for summer Much better than Stock radio with the tape player Holy intake Batman Gotta have the Juice! But what about the Alternator to charge it That needs to be cleaned…

Alright people.....this is gonna be good....me and my team mate Anthony are givin this bish the works.....only thing we are using original is the shell....wrapping this bish in black vinyl.....building a brand new port.....resin all up in this.....and some super secret adapter rings that you'll see later....I missed a few pics but the vidz will be up soon with all the action!

I helped a friend of mine out over the summer on his Lightning. System composed of... Pioneer head unit 2 sets of 6.5 Polk components 4 10" Polk subs Memphis 5 channel amp 1/0 wiring 2 Kinetik batteries Custom fabbed door pods, battery trays, and amp rack. The sub choices were limited due to budget and space. All factory power and grounds upgraded to 1/0 wire and a high ouput alternator is planned over the winter. All power and signal wires have been kept seperated. The cab floor, rear cab wall, and doors have been fully sound deadend. Sub enclosure. 3/4" mdf used with 3 internal braces. This was built by my friend Amp rack. Used 3/4x3/4x1/8" angle and some flatbar f…

Starting a new build for the gmc sierra. .went from two audioque hdc4 18's to 12 skar zvx 8" subs..

No details just wait as the pictures roll. If you know anything of my previous logs i dont hold back but this time i am doing a collabo with jay-c76.

Well yesterday finally got descent weather to let the kids play outside so I can work on my build. Yesterday I was able to start with the sound deadner I had purchased several months ago. I am going to have to order more I did not have enough. Also I am going to order the SDS deadner next time. I have read alot of good things about don and his product and he responeded within hours of my email about his products. enough talking here are my pics. So excited to get this started. First piece!!!! My Helpers!!!

Finally made a start on my new build this week Will be slow with updates over the next 1-3months, but in the end it should equal to one of the loudest cars in the country Its called mini mayhem due to it sharing the same equipment as this van: http://www.talkaudio.co.uk/ipb/index.php/topic/294453-ascendant-audio-chevy-astro-the-mayhem/ Of course its on a much Smaller Scale, kit list will include: 2 Ascendant Audio Mayhem 18" Woofers 2 Pairs of Ascendant Audio 7" Mid range Speakers (4 in Total) 2 Pairs of Ascendant Audio Tweeters 2 Pairs of Bullet Horn Tweeters Alpine 9886R Imprint Sound processor Audiocontrol Epic 160 Vibe Deltabox Fusion Powerplant 4 Channel amp (4X 22…

Ok yesterday was beautiful day to do fun hook up my amp kits.. All i gonna say is It's easy and simple.. I like clean hook up.. No messing lose wires.. I rather use zip tie together look nice..

My name is Kyle Golden, im 17, and this is my 1994 GMC Yukon. It was fully built by me at age 16. The only thing i did notdo completly by myself was the paint and prep. My parents bought the original vehicle for me for 2k before i even had my license. I had been installing for almost a year at that time and learned all of my knowledge from fiends at local shops, 10 years worth of CA&E magazines, and numerous online forums and tutorial sites. I began work on it in May of 2007 and started by complety gutting the entire vehicle. ever since i began lookin at pictures in CA&E when i was liek 5 i had always had a vision of MY system in my head. I had also been doi…

So school is finally over, the weather is finally starting to turn around and everything is looking good for a new build! So to start things off here is the box I will be building the over all sizes are 30x36x17.5, this box is a master piece of shizzzon designs! (look him if you need help with a weird install in a small spot!) he cubics before displacement are like 7~ and after 6.5~ and tuning is 40hz (may change in the future) Now here is my old box and as we can see the mdf soaked up the water like a sponge lol! so needless to say i had a leak issue also if you are interested here is a link to my old build. Onto the bad parts in the trunk, also not shown the tail…

This isnt gonna be anything crazy but heres what i got so far. I got polk audio 2ways in all the doors, pioneer 5200 HU. Over the past few days ive been laying down Fatmat rattletrap in the car. I got the whole trunk done with one layer and the outsides of all the doors are done too. I was thinking of doing the roof or the floors but im lazy and dont wanna rip it all apart. I only took a few pics of the trunk and dident get any of the doors (sorry). I have just ordered an FI SSD12 and will be building a box this weekend for it. Its gonna be sealed 1.25cubes BEFORE displacement. I'll try to take some good pics during the build. Thanx for looking and here are some …

Budget Build, It is going to take awhile to get everything sorted out but right now this is my plan. Green = Decided Red = Undecided 1 Pioneer 80-Prs (active) 1 Crescendo 1100.4 - On Subs 1 Soundstream rubicon 2.600 - On Mids 1 Stetsom 200.2 or Lanzar VCT 4ch - On Highs 2 Crescendo ft1s 2 Crescendo 6.5s 2 Crescendo 10s or 8s 4 SSA Dcon 15s in a slide-in wall. tuned between 32-35. Around 170in of Port. 1 Mechman 270-320amp Alt 2 Diehard platinums @ front 2 HC1200 @ amps 1 Stinger voltage meter Audiotechnix 0g Audiotechnix 12g Audiotechnix Premium Rcas Audiotechnix 80mil Eventually I'll switch from the Dcons to something bigger, but for now 4 Dcons is the plan. Tha…

Got a friend that has a 2007 Chevy Silverado 1500 Classic and he already had some JL Audio ZR components installed (if you would even call them installed.The work was HORRRRIBLE).He initially came to me wanting as much CLEAN,LOW bass as possible without having to cut into the bed or giving up any seat space.I immediately thought of the Digital Designs 1008b's.After a few phone calls with Steve over at DD we got something worked up mapped out.After popping a few panels inside and seeing the pitiful quality of the work inside, my buddy agreed to let me strip everything out and re-install all the existing equipment. Now, on with the pics...... I'll see what I can ge…

This build is in a 2006 Nissan Xterra. I am currently upgrading a few things, so figured I start a build log. The equipment list at this point. Headunit: Pioneer AVH-X4800bs DSP: Alpine PXA-H800 w/RUX-C800 controller Amps: Memphis 16-MCA3004 on tweeters Alpine MRP-F600 for mids Alpine MRP-M2000 on sub duty Current drivers: Tweeters: SSA Evils Mid: Seas U18/RNX/P Subs: SSA Icon 15"s sealed Batterys: Super Start Platium 34/78PLT (front) Super Start Platium 48PLT (rear) Here's the pics!

I’m try to install a system in an old Saab 900. Im currently adding active crossovers and EQ sound processors. Still learning to get a nice setting that’s clean but not thin. Finding how to EQ the sub channel. Any advice? I post a picture or two if I can

getting started : getting a dubble sided flared port in there : worked the horizontal bracing open and added the first layer of triplex : after a few layers : getting a layer of triplex on the top and bottom : the result: painted black : the end

Alright. It's time for a new build as I'm bored of my home theatre subwoofer. I already talked with Mark a bit and I'll be picking up 4 MJ-18s along with a Beringer EP-2500 amplifier. I'm thinking it will be made up of 5 pieces. (2) sub boxes, (2) speaker stands, and the main unit. The sub boxes will have 2 18"s each, and I'm probably going to go taller this time around and get it a bit skinnier. The speaker stands will hold one B&W DM 560 with the bottom of the speaker at 30". I believe at that height with our couches should be almost ideal. The main unit is going to hold out cable box, my Denon AVR-1707, the PS3, the PS2, the N64, the Beringer, my mini-fridge, and…

I have one XL in, the other one should be here in a couple days. Waiting more paypal to clear then my stetsom 7k's will be on there way. I will be wiring one stetsom too 1.4 ohms for daily use and will be wiring each stetsom too .7 ohms for burbs at shows. I need to get one of the stetsoms repaired will cost $300 too get it fixed. Constructive feedback is welcome!

Here is my build log. I have a 2008 Jeep Grand Cherokee with two SSA ZCON 12’s. I have the subs, amps and batteries in and just working on getting the electrical and speakers installed. Running low on funds but here is what I have so far.

Well i traded all 4 of my 15 and got 2 18 death penalties Whats going in 2 kinetik 2,400( ho alt) sundown 100.4 2 sudnown 3000(gonna run them at 2ohm) or 1 at .5ohm 2 hi-vi mids in a pillar along with vifa d26dt the front doors will be redone each hold two eton lpg mids might get a 50.4 later on to pics eton lpg sundowns subs more pics to come when stuff comes in

This will be my first build log so any suggestions to improve it are welcome. This build is going to take a long time and I'm in no rush. Slowly as I get cash I'll be buying the parts one by one. I'll be going for an active set up. Car: 2006 Toyota Camry Altise Limited V6 Here's my shopping list: Head unit: Pioneer DEH-80PRS This head unit has all the features I want for the active set up. Mid Drivers: Morel Supreme SCM634 Carbon Fiber Cone 6" Midrange Tweeters: Morel CAT308 1" Textile Dome Tweeter Subs: 2x Fi Q15s (Bought) 4 Channel Amp: Undecided Mono Amp: Crescendo Audio BC3500D/Crescendo Audio BC2000D Good value for money on the BC2000D. Just not sure if I want to run…

Sorry for the semi-blurry pics, it was foggy as a mofo outside.

I'm not sure if this is the right section I hope it is. I hope you guys enjoy the pics http://i883.photobucket.com/albums/ac40/gadgeteer123/Xcon/100_0381.jpg

Okay, so as I'm waiting for my SA-8 to get here (as patiently as I can!) I'll put the build of my center console box for it. It's an old beater minivan for my everyday vehicle, but I'm just trying to have some fun. I don't have the area or tools to do the kind of work I'm used to being able to put out (maybe I'll share some of those pics sometime) since I'm working on some flimsy stands with a jigsaw, circular saw, and sander, but it'll do for this project. And so I begin... The wood...good old 3/4" MDF The sides cut out Test fit of sides