Build Logs

He is my buil log from SMD forum... I'll post some pics here & post to both from now on: http://www.*****.com/board/topic/97426-93-ford-bronco-slow-rebuild-breaks-parts-hunting/page__p__1345285__hl__bronco__fromsearch__1#entry1345285

Ok so this will be my official build log of my 94 Acura Legend Mobile Car Audio/Video Project. I will keep this thread updated with pics and videos of the project. The goal for this project is to build a Audio/Video System that is aimed for Daily Driving """SQL""" but also has some impressive SPL. I drive this car 100miles/day so reliable is important, I have allready done allot of visual upgrades and performance upgrades to the car allready : Here is the car when I first bought it for $700 Totalled: After 3 months of hard work here is the car fixed by me: Here's the Plan : Pioneer AVIC-N5 Headunit 6.5' Infinity Kappa Fronts 6x9' Infinity Kappa Rears U…

First off, I'm going to tell you now this is going to be a super long build. I work a minimum wage job and have a child to take care of and bills to pay so they come first, Also bare with me this is my first actual build myself. So if I mess up somewhere along the lines, Feel free to give me some ideas and pointers i'm always up for learning new things. So to start this off, The stuff I plan to run. 2 dc audio level 4 15's 2 dc audio 2k's 2 xs power 3400's PPI S2 Components Mechman 270amp Alt The Jeep SKY HIGH FTW

here goes my first build log. I put it in already these are some quick pics on the cell phone will get pics of it tomorrow can't tonight the jackers are watching.

Just finished this up for a friend nothin fancy it's a budget build and it slams, it's one zv3 12" in a ported box with a crescendo 2k 0ga all the way to the battery has two batterys but the one already took a shoot, has a digital volt gauge and it drops below 10 on a low note but anyway here's some pics it gets the job done With the seats out Is fully sealed, no leaks that i could see so far

mmk so the time has come for the teardown! as much as it hurts me to destroy my own work, i have to do it! Next year it will be MUCHHH better. so the first plan is to rebuild the box. the plan is to keep the back, bottom, and sides. but do away with the front. i will add about 10 inches or so to the top oof the box with a 1 1/2 baffle board with flushed FI SSD woofers. the batterys and MA Audio amps will be displayed on the front of the box and all flushed in..the box will be ported out the back and tuned to 33 hz for dailly. and there will be a romovable plate on the port to raise the frequency to around 44 for competitions. and finally the inside will be glassed. if yo…

My name is Kyle Golden, im 17, and this is my 1994 GMC Yukon. It was fully built by me at age 16. The only thing i did notdo completly by myself was the paint and prep. My parents bought the original vehicle for me for 2k before i even had my license. I had been installing for almost a year at that time and learned all of my knowledge from fiends at local shops, 10 years worth of CA&E magazines, and numerous online forums and tutorial sites. I began work on it in May of 2007 and started by complety gutting the entire vehicle. ever since i began lookin at pictures in CA&E when i was liek 5 i had always had a vision of MY system in my head. I had also been doi…

BIG install coming soon!.... This is my first build out....the only experience i have with glass are with the 2 kick pods i have in there now and it was a learning one! They turned out great but i made the mistake of drilling a big hole through the back to port them...oooops! They made $800 dollar comps sound like a gramaphone....so I'm making new ones. Along with, 2 pods on rear of the headliner, 2 amp racks on the rear panels and 2 enclosures above the wheel well. The equipment... Current System: Kenwood KDC-X890 Head unit Phoenix Gold ZX475 Amp Phoenix Gold XO Elite TI6 Comps Made by Morel 12" Fosgate Punch HE2 Dual 4ohm in a HUGE bandbass box Adding: 2 DLS 8'' Coax S…

I've been checking out the forum for a week or so and have seen and read about some realyy cool stuff and I wanted to share some of what my son and I have been working on. This is a car that I purchased for he and I to spend some time together and express some of our passion for the audio and car world. What I plan to show is a somewhat complete project but includes our stereo install as well as the complete project. So here goes....

So school is finally over, the weather is finally starting to turn around and everything is looking good for a new build! So to start things off here is the box I will be building the over all sizes are 30x36x17.5, this box is a master piece of shizzzon designs! (look him if you need help with a weird install in a small spot!) he cubics before displacement are like 7~ and after 6.5~ and tuning is 40hz (may change in the future) Now here is my old box and as we can see the mdf soaked up the water like a sponge lol! so needless to say i had a leak issue also if you are interested here is a link to my old build. Onto the bad parts in the trunk, also not shown the tail…

kenwood 6.5" speakers q power tweeters 0 gauge memphis wire Shuriken battery clarion equalizer soundstorm crossover fi-day x 12's hifonics brz1700 3g tethering with my phone for google maps for navi and streaming fm radio. hifonics brz1700.d, tsunami 4 channel for mids & tweeters fi-day x 12's tuned 33hz New amps 2 crunch p600 for the highs and mids my next project is a 15 Fi btl n2

Hey guys, Finally uploaded pictures of my setup. My Ride: (1995 Honda Accord) Head unit: (DEH-P600UB) The Amp: (Sundown 3000D) The Back Battery: (Powermaster D3100) The Sub: (Fi BTL 15") Still working saving up for a H/O Alt which will be in by end next month. Then I can actually turn this shit all the way up! Comments are always welcome. Thanks, Curt

I have posted a few times for direction and info and such and figured I would make a build log just to keep up wih whats going on with the car. Right now the car is more performance than audio but Im soon to even it out haha Right now I am running 2 Kappa VDQ12s off a Punch Power 500a2 (black and grind) My projected plans so far consist of: 3 SA8 1 SAX1000D As of right now I havent set in stone what Im going to run for highs nor what deck I will use. The Head unit I have now is a nice older kenwood but I think I may step it up to something newer. Here are a couple pics of the car and my start to the system: The car: The start of the madness: Just the template so far fo…

Figured I would give y'all something to look at. This build is for my little brother in his 95 Burb. Head unit... pioneer deh7500had Amps... Two bc2k's on subs, CT sound 125.4 on mids and highs Subs... Two Sundown X18's Box.... 14cu tuned at 30hz... 207sq in of port Subs up port to side, cause I want to..... Front stage.... Sundown Neo-Pro 8's, Nendo FT1's on dash pillar pods. Electrical.... Big 3 with all 2/0, two Die Hard Platinums gr34's underHood Pics to follow.

My current setup is ok, but I think it is time to take things to the next level. My current project is upgrading to an active front stage. Later I hope to add another 12" GCON or maybe upgrade to a 15" XCON. Anyway, I got my HU and I am waiting for my seas 7" woofers to arrive. As soon as I get paid I will be ordering the tweets. Then the fun begins! I installed the 80prs and ditched the passives on my entry level BA comps. After an hour or so of tweaking The sound is WAY better! I am not going to spend too much time dialing them in since I will be replacing them soon, but I want to get used to the control of active tuning...I love it! Here are a few pics. I measured …

Doing a rebuild in the blazer with all crescendo audio equipment. 6 BC5500S 12 contralto 12s 2 10s 4 8s 1100.4

Alright, I figure I'll get lots of things I did wrong pointed out, oh well. Bear in mind that this is my personal vehicle and it won't be my primary for more than a couple more years (if it lasts that long as many miles as I drive weekly). The goal is active 3 way from passive 2 way with a clean looking setup and of course, a new woofer (since the Quatro was only meant to be temporary). I'll start with the boring "thank you's" first. Thanks big time to all of these people: Pete with Team Toxic Bass and Hexibaseforum.com (user = Hexibase) for the enclosure design help Scott at Fi for answering all my questions and selling me a great woofer Scott (xbrightsidex) and joe …

Doing a little work on Grandma's Car. http://www.youtube.com/watch?v=T1PJ7gAQths http://www.youtube.com/watch?v=yeUECReK_As

http://myspacetv.com/index.cfm?fuseaction=...ideoid=27964439 Well this is the quick install I did in my buddies Yukon... only spent about 4-5 hours--including time to build the box... the dancing can is 3/4 full... we noticed it spinning while we were adjusting so I shot a video of it.... don't mind the distortion.. it doesn't sound like that... my cheap digital camera can't handle the pressure.

This is yet another build for my good friend. Seems he has to buy a new truck every year or so... What's Going in: 2 Massive Audio DB8000 Amps 8000w @ 1 ohm strapped (the two amps will be strapped and running 1.33ohm) 1 Massive Audio HD1600.4 200w x 4 @ 2 ohm 1 Soundstream Ref Comp set 6.5" (something used I had sitting around that he liked) 3 Rival Mobile Electronics A12.22 4" VC D2 ohm 2000w RMS 2 Shruiken BT120's JVC Deck--nothing fancy 1/0 everywhere... big 3 ect... all tsunami cables **not sure on the rear speakers yet... they're not all that important... he's got some old soundstream 6x9's that we'll probably stuff in there..

Ok, so Ive decided to make a build log, because i didnt the first time around and really wanted some feedback. So here it goes. Car: 1996 Isuzu Rodeo: Big three done in 1/0, no other electrical, until next month! haha! lol Equip: 2 Soundsplinter RL-P 18's 2 SAZ-1000D's (only have one as of now) Pioneer DEH-500ub(already installed, probably will replace it soon) Polk MOMO 6.5" components Kicker zx 200.4 (will replace after entire build is complete) knukoncepts 1/0, rcas, ans speaker cable(already ran except for speaker cables) SDS cld tiles(40 in it already, more will be coming) butyl rope, and ccf(already in) …

after my whole system was stolen I'm completely re building (see sig.) So far i have 2 infinity 7521a amps, pioneer DEH 6800 MP deck, 4 RE SR 10's. A buddy of mine at a local shop might hook me up with 2 Rockford 500.1's around 700 RMS each. He's also building me my custom ported box and a flush mount amp rack... I've never had 10's before, what do you guys think?

well i got bored tonight and put my cd player in. ill just get a few pictures of it in tonight. tomorrow i have to run the usb to the glove box and secure the dash kit but i was anxious to get started. tomorrow after i get the cd player finished im gonna start on the box build. its not going to be anything spectacular but hopefully keeps me happy for a while. gonna get the box built and hopefully the sub and amp will be in wednesday and ill get pictures and hopefully a video up. i know the type r coaxials arent the greatest but with this cd player its so much of an improvement over my shitty ass stock ive had in there for a while. cd player is the pioneer deh 7400hd

Finally posting up some pics of my ride so everyone can see what I have since I use to ask so many questions and get tons of advice all the time and noone ever saw any of what i ended up with so far. Hopefully I get the pics up correctly.. Btw.. 18" Fi SSD... Sundown Audio Sax-1200.. EDIT: Aw Crap.. I uploaded them as links.. i hate links they are annoying.. sorry guys. If anyone knows how for me to put them so they come up as pics.. let me know.. thank you lol http://img51.imageshack.us/img51/2783/dsc08466f.jpg http://img168.imageshack.us/img168/2762/dsc08467a.jpg http://img691.imageshack.us/img691/8431/dsc08468d.jpg http://img607.imageshack.us/img607/4756/dsc08469.jpg…

Its time to finally install all the goodies I have purchased before I got laid off. Alpine IVA-W505 Headunit Alpine PXA-H701 Processor Alpine RUX-C701 Controller for PXA-H701 3x Sundown SAX-100.4D for Highs, Mids and Midbass 1x Sundown SAZ-3000D 4x SEAS Prestige 27TFFNC/G (H1396) 1" Textile Dome Tweeters 4x Tang Band W6-1721 6-1/2" Underhung Midbass Drivers (Midrange) 4x Sundown E8 Woofers for Midbass 2x Sundown Custom 15D1 Nightshades with Copper Coils DC Power Inc 250amp alternator w/Switchable MLA Module - already installed. I started with the power backbone. I installed a DC Power 250amp alternator and switchable MLA module. Kinetik HC1800 Under the hood, Big 3 w…