Build Logs

Truck- 2008 Escalade Subs- 2 AA chaos 15's Box 7cu ft@34hz Subs up port back

Built this for a Atomic AP/SPL. Sub is getting built with FI parts. Sub parts should be here tuesday and box is ready. This is going to be powered with an audiopipe 1500d and is going in a 2010 honda accord sedan. About 3.3 cubes tuned to 35hz with a single 6" aeroport. I'll be adding some polyfill to see how much better it would sound for the owner. Maybe about 3 lbs worth.

First off, to those who have helped me with my mid bass thread. I'm still planning/ listening as time allows. Thank you, to those that have offered help , you know who you are, it's greatly appreciated and I should have some updates soon. O.K., I figured I'd better get off my ass now that i have some time and get the subwoofer box on its way. This is an enclosure for 4 sa-8's, 3.6 c.f. (net) tuned to 33 hertz with 52.875" of port. It will be driven by a sundown saz-2000d @ 1 ohm. This is going in my 2000 ranger extended cab pickup. Everybody has seen enclosures with kerfed ports, but not like this one I'd bet. I was originally going to do a double kerfed port, but in the…

Build starts today. It's going to be a real easy drop in build... hopefully! Here's the car.. Front stage: Head Unit -- Stock (until dash kit come in) Amp -- DX-200.4 Components -- Bravox Audio CS60CF Sub Stage: Amp -- DX-1000.1 Sub -- 12" SSA Icon Enclosure -- Ported 12" KhaotiK Enclosure Custom built w/ double flush

Whats going in the box? The amp will be a Merlon Audio 1900 Pro (2000 watts rms at 1 ohm)

Here we go... Equipment info: BOSS REV665 (2) BRAVOX AUDIO CS50K (1) SS DAMPLIFIER PRO ECLIPSE 8443 (1) more info to come soon... here are the pics of the car and the component install (with bonus Deadening pics ) & of course, Mark will be helping me with this The Fammed Video

So i posted some pics of the new box i got for free and decided i was going to do a half wall with it, ha yea not to much thought has gone into this at all just kinda going to go with it and hope that it all works out ha, plan is to take the box build a false floor get it on bolt it down, see how it sounds than eventually build some baffle to go over that so air doesnt escape, im new to car audio only been into for about a year but the box is for 1 15 but i amgoing to cut it to do 1 18 and its tuned around 30 hz, i have a elemental design 19av2 that i got for a 100 bucks, the box for free and 6 sheets of 3/4" mdf i also got for free im looking for an amp as we speak and e…

Words cannot explain the satisfaction of having a box that is built exactly to a sub's liking! lol I hate that we didn't just do this first! lol My teammate Anthony threw this together for me with what used to be the 3rd row wall box. All birch.....S port ....double baffled box....4.5 net tuned to 28hz! This thing is sex!!!!! It needs some paint or carpet or something to pretty it up...but that is no concern right now! lol Some of these pics i have posted already on a couple forums....but here they are again! lol Video is uploading now!!!! And we might throw her on the TL tomorrow! Compared to old box....

got a couple of pics from my benz that i am currently trying to get right. i had the door panels made by a custom shop, the box was made there also but it came out of my other car which i am debating on selling. the car actually had a whole system put in by a shop. i eventually got bored and wanted more power plus i wasn't too thrilled with the original install. so i and redid some of the wiring took the box out of my other car bought some other goodies and am now here i am. the rear deck lid i am going to have to do that myself to keep cost down, hell the only reason i had the shop do the first install is i had shoulder surgery, had jus bought the car, and i wanted sound…

Hey guys im pulling out the old system and replacing it and reusing some. currently i have 2 re audio 8s under the back seats and MB quart q series mids and highs. Im puttig the 8s in the back doors and putting a Fi BTL 12 in their place. gonna be running mids and highs off a sundown sax 50.4, midbass (re8s) off my sax 125.2 and the btl off the saz 1500d. anyways its gonna be a process. just got all new knu 1/0 power and ground and 200 sq/ft of fatmat rattle trap today so im getting started on that. already started my btl box12. take a look.

If i have mark build my enclosure is it going to make a big difference on how it sounds in/out side of the car? My friend has a 10w7 and hes louder outside the car.. You can hear him anywhere. Will i be better off just having mark build my enclosure?

Well, since Fraze(CNC) disappeared with my door panels, 6.5, tweeter, and crossover. Decided to get started myself. Started off slacking on the pics (was anxious and in a hurry lol) I was outta town with work, and showed my dad what I wanted done before I left. He started with this Good thing I made it home before he did any fiberglassing. Now looks like this. Not much had to be cut Rings to space it up, to give it a curvy look Rings to make it flush mounted Bam, waiting for all the glue and what not to setup

Hey guys. Going to go ahead and start up a build thread. This will be our first audio build, so I'm hoping it goes right. It's going to be for a 2005 Chevy Tahoe Z71 4x4. A little background on the truck: raised 3" with torsion keys, front brush guard, 33" BFG Mud Terrains, PA system, and straight pipes with 5" tips. What's going to be going in it: Sub: (1) 18" DC Audio Level 5 Amp: (1) AudioQue AQ2200D Rear Battery: (1) Deaka 9A31 Front Battery: (1) Yellowtop Wiring: Knu flex 60ft of 1/0 power wire (1 full run of pos & neg) Knu RCAs (I noticed these came in a fancy little box... pretty nice) Knu 8ga speaker wire Headunit: Pioneer AVIC-X910BT http://www.sonicelectroni…

So I'm gonna make one anyway, so why not start now. The current equipment: Kenwood Excelon KDC-X692 Pioneer 3 way 6x9's(4)(1 in each front door and 2 in the rear deck) Bazooka EL500.1 Crappy Scoshe wiring for sub amp 2 MTX RoadThunder 12's(sealed pre-fab box) Excluding the Headunit, everything is not as good as I want. I have 3 shipping boxes in my trunk right now that contain: TEAC 2x100 amp(bought for $15 from Spy. Thanks dude) Phoenix Gold RSD6CS 6" Components KnuKonceptz Kolossus Fleks 4 Gauge 4 Amplifier Installation Kit I hope to make the speaker adapter(for the 6" to fit in the door) and install the comps pretty soon. I'm also removing rear fill. After that, its …

Pretty straightforward build for a customer. 1.5 cubes @ 35hz. Dustin www.DLdesignz.com

After a recent break-in, I'm having to rethink/rebuild my subwoofer box and amp rack, as well as replace the equipment. Fortunately my front stage was untouched, so the only change coming is in the rear. Vehicle: 2004 Toyota Matrix Equipment (new stuff in red): Source: Rockford/Denon RFX-8250 Mids: Usher 8945P 7" Tweets: Peerless 810921 HDS 1" dome Sub: JBL W12GTi MkII Enclosure: 1.7 ft.^3 sealed (after sub displacement) Front amp: Kenwood eXcelon XR-4S Sub amp: Kenwood eXcelon XR-1S Processor: Rockford 3sixty.2 My goals for this build are to decrease subwoofer footprint by utilizing the spare tire well for extra airspace in an effort to increase cargo capacity. Hopefully…

This is yet another build for my good friend. Seems he has to buy a new truck every year or so... What's Going in: 2 Massive Audio DB8000 Amps 8000w @ 1 ohm strapped (the two amps will be strapped and running 1.33ohm) 1 Massive Audio HD1600.4 200w x 4 @ 2 ohm 1 Soundstream Ref Comp set 6.5" (something used I had sitting around that he liked) 3 Rival Mobile Electronics A12.22 4" VC D2 ohm 2000w RMS 2 Shruiken BT120's JVC Deck--nothing fancy 1/0 everywhere... big 3 ect... all tsunami cables **not sure on the rear speakers yet... they're not all that important... he's got some old soundstream 6x9's that we'll probably stuff in there..

Well haven't posted up here in a while so i thought id post up what I'm doing lately. I already have 2 SA-8's on the way and I'm going to pair it up with a SAE 1000d amp or an SAZ 1000d amp (not really sure what to get at the moment). I will be wiring both of them down to 1 ohm. It's all going in a 1992 toyota pickup extended cab. Here are the specs of the box I'm designing at 32 hrtz. In the 3D photos the length should be 40" not 36". Any comments, help, or info would be appreciated. Thanks-Blake

Take pics of your setup

So far I have: headunit: alpine cde-102 front: alpine 4x6 rear: polk 5 1/4 amp: RF punch 3001, Bought a SAZ-1500 from Bigrank a couple days ago sub: alpine type-r 10", ordered two SA-12's a couple weeks ago, hate the wait Already done Big3 Next on agenda: need to replace 4gauge amp wiring with 0gauge get a stinger voltmeter h/o alt replace stock battery Here's some pictures for ya More to come once I get the SA12s and saz amp in

Volt Meter Nice voltage huh? Went ahead and foamed while i had everything apart (btw i know in the pic it says 2008, guess the camera isnt setup with right date)

The 1987 Mustang Build Has Officially Has Begun ! Will start the Actual Build tomorrow. Will be getting some help by My bro ElBlako (Member Here on SSA) And maybe a cutie Will have pics up in a little bit of what i got today.

I helped a friend of mine out over the summer on his Lightning. System composed of... Pioneer head unit 2 sets of 6.5 Polk components 4 10" Polk subs Memphis 5 channel amp 1/0 wiring 2 Kinetik batteries Custom fabbed door pods, battery trays, and amp rack. The sub choices were limited due to budget and space. All factory power and grounds upgraded to 1/0 wire and a high ouput alternator is planned over the winter. All power and signal wires have been kept seperated. The cab floor, rear cab wall, and doors have been fully sound deadend. Sub enclosure. 3/4" mdf used with 3 internal braces. This was built by my friend Amp rack. Used 3/4x3/4x1/8" angle and some flatbar f…

im about to start my build for my very first system. its going in a 1997 honda accord and its nothing big like alot of people on here but hey you got to start somewhere. whats going in my car: alpine type r 10 alpine mrp-m500 alpine sps-600 kenwood kdc-mp242 i will post pics but idk how to so can someone tell me how to post pictures

i started this build log over on smd so i will link it since i update that one alot and ill try and get pic on ssa one's 91 accord total rebuild (new vids) - SMD Forum