Build Logs

Just bought me a new car.. New setup, new everything. Basic Specs Trunk Space: 13.4 ! Horsepower (SAE net @ rpm) 305 @6,500!!!! Super fast engine for a V6 MPG: 19 city/31 Hwy automatic, EPA-estimated (I get about 21.5 city) Bore and Stroke (mm.) 95.5 x 86.7 Compression Ratio 11.0:1 Torque (lb.-ft. @ rpm) 280 @4,250 Now some pics

4 cuft net tuned to 37hz. 52.5 in^2 of port area. window brace and 1 dowel Still waiting for carpet.

SLOVENIAn (European) TOP....stuff Alpine IVA-W502R Alpine PXA-H701 Ground Zero GZCT 0500 [x26] Ground Zero GZCT 2200 NEO [x8] Artea Altoparlanti S8.4 [x8] Artea Altoparlanti S8.4 PRO [x6] Artea Altoparlanti S10.4 PRO [x4] Ground Zero GZPW 15SPL EXTREME [x10] Ground Zero GZHA 4150XII [x2] Ground Zero GZHA 2350XII [x3] Ground Zero GZPA 1.10000SPL-HC [x5] NorthStar NSB90 [x10] CTEK MULTI XS 25000 [x4] Alpine HCE-C100 + Digitaldynamic HDC-CAM 01 Ground Zero GZVM 1004CM + AOC 19” Widescreen LCD Monitor

Alright so many of you may know I've gone through several systems in the past few years that have ranged from third row boxes, third row walls, all the way to a b pillar wall. Every single one of these systems were only able to reach 150db and not more beyond that. I've decided to step it up a notch this time and stop doing 2 subwoofer setups in such a large vehicle. With that being said, here are some details. Woofers:(8) American Bass XFL 15's Box Design: 6th Order Bandpass Power: 12,000 watts, eventually 22,000 when upgraded to 16 volts Speakers: More information to come Box and design being built by Mike Singer Got rid of the old 2x4's and put a new birch wood …

2 audioque HDC3 15's 1 sundown saz 3000d 1 jl 300/4 Pioneer avh p5000dvd 00 all the wat back Kinetik hc800 and hc 2400 in the back deep cell up front for mid idk yet still lookin around Tweets uhh lookin at seas prestige idk yet though I need help on the box. I can't find box specs for these things anywhere. I've seen people with 4.5 for one and 8.5 with 2. I was thinkin around 7.5 at 34. Any suggestions on mids tweets or box size and tuning is welcomed. Ordered the subs yesterday haven't received any shipping details yet, but I am expecting about 2 or 3 weeks. This will be a pic heavy build and video heavy. STAY TUNED!!!!

Okay so obvs this is NOT car audio build log, and i couldn't decide if this belongs in the Off Topic or what so fuck it Most people don't know how it's done, a lot of people ask me.. but it's to complicated to explain in a small conversation. So.. what's better then a build log? This is mainly for my SSA brothers and sisters to kill some time This is going to be a Soccer Field in Scottsdale, AZ It's 14 thousand square feet. This was originally an Inline Hockey Rink, but in AZ Soccer is SO much more popular. Pulling the rolls of Turf off the trailer Before we touched anything Dropping the rolls of Turf in place Second roll dropped Keeeeep em coming! Rolling them …

well, my subaru kicked the bucket and i went and bought a 2003 Ford Explorer with 61,000 miles on it this past sunday. Which means i get to un-install all the stuff from my subaru and re-install everything back into the explorer. This is what i have done so far... -headunit -2 amps -second batt -and of course subs and box and my dumbass forgot to take a lot of pictures., i dont know what it is but once i get to working i just forget completely about pis. i think the only 2 pics i got is when i had the dash out for the head unit and when mounting the fuse under the hood. but this is what i got still gotta mount the bass knob somewhere still gotta buy a new toggl…

its been awhile but i finally got my system pretty much done. still got sum stuff to do much nothing major. Im running 2 8" L7's dual 2ohm wired in 4ohm powered by 2 kicker zx450.2 amps in bridged mode. The box is 2.20 cu. ft with a L shaped port tuned to 34hz. These little 8's are sick. i had just the one 8" L7 and amp for awhile. Plus this is my first fiberglass project and i gotta say it turned out great. theres 9 layers inside and out (18 all together). need to prep for paint next but im not in a hurry just yet. so once i get the new sub broken in im gonna make a vid. so let me kno what you guys think.

Figured I'd post a build log for my truck, a buddy (John Holmes) and me are doing it. As I've said before I haven't dealt with car audio much since highschool but for whatever reason got the itch (herpes) this year. I don't really drive this truck all too often, it's primarily just used for towing although I will most likely put a few more miles on it now that it will have some sound. Did the big 3 and battery a few weeks ago but had to wait for a little nicer weather to start working on the actual sound part. Here's a quick rundown of the parts involved from front to back, it's missing stuff I know but it won't be done for a while. Front battery: Deka 9A78DT Headunit: Ec…

Alright people.....this is gonna be good....me and my team mate Anthony are givin this bish the works.....only thing we are using original is the shell....wrapping this bish in black vinyl.....building a brand new port.....resin all up in this.....and some super secret adapter rings that you'll see later....I missed a few pics but the vidz will be up soon with all the action!

alright this car has seen quite a few different systems in its life and im gettin tired of changing so i figured do one big one to get it done. here are the specs of the build. car-1998 dodge neon HU-Alpine IVA-D900 Mids- 2 Mach 5 audio mli's tweets- have them dotn know name. mid amp- proto type i bought of ca.com(not hooked up yet.) Subs- 4 10" SSA Dcons!!!! Sub amp- 1 Audiopipe 1501d at 1ohm box- custom 2.9 per side clamshell tuned to 30hz also- custom headliner and seats and doors wrapped to match. enjoy! on to the pics in no order cause my camera is stupid.

EDIT - 2.2 cubes net tuned to 34hz with one 4" PVC pipes with rounded 90 degree angle turn. This will be right up behind the back seats of a 2000 mustang and will have a carpeted wall flush with the box. The baffle angle is 25 degrees. Powered by a AP15001D. More to come soon.

i just started my build today. rain slow me down a bit but still got some good stuff finnished with a small amount of time. this is my first big build. I am doing pretty good i think lol ~pre-head unit~ ~old head unit just until the new one got here, i got a new pioneer 6100BT *ill get a pic up soon* ~just got the back hatch for my trunk done ran out of day light and energy~*not bad for the first time useing dampener lol* ~battery befor i did the BIG3~ *there was a small wire going from a fuse box above the battery to the battery i dident change the size just put some new wire* i have some better battery terminals comming also alot more to come. just got the car las…

Have Everything Set Up For The New install just need a design for the box Im looking for A design for 2 15's Dual chamber roughly 10-11 Cubes with measurements Around These... Height - 20" Depth - 26 " Width - 49" the design im leaning toward is subs facing towards the back of the seat with port underneath each sub. 2 ports 1 for each chamber...

this build will be over the next month but i got some stuff for ya to see now... i have a lot planned. i just got the box last night and im going to finish the amp rack today. i still gotta pick up an extra batt today as well. then its all wiring time. tell me what you think so far..... 2 dc level 4 15" with level 5 dual 1 ohm coils box is tuned to 35 hz here is where the amp rack is going....im getting some vinyl work done to it today gonna be doing some fiberglass work to the front doors... i will post updates when something new happens...... tell me what yall think so far

Equipment- 2 12" RE SE D4, 1 Audiopipe AP1800, 1 set of MB Quart Ref 6.5" components, DEI xtreme 6002, 1 Kinetik HC1400 and HC1200 , PS2, 200-250 amp alt. Here is the car Inside the car bolted in with trim panel Start of the kick panels

Here is my attempt at a loud build... The beginning of the box The internal window bracing using 8 4" circles The double baffle and port Before final assembly Assembled with Herculiner box liner on front and carpet on the rest Close up of the flush mount and box liner Box in the truck

I just traded my stroker for a new yellowtop, so I figured it's time for me to make another install. I decided to make a 4th order cut through running one 15" opti1532d. My main reason for running lanzar is because everyone I know thinks it's trash. I guess "trash" comes with a 4 inch voicecoil and 19mm xmax. I would of cut through my rear deck, but I'm not really experienced enough to keep that setup mobile in case I needed my spare tire. I cut through my rear seat, I believe I lost output compared to the deck, but this eliminated any rattling on the interior and exterior. I've already metered her, the loudest frequency is 32 hz and she does a 140.8. on the dash and a …

Did some figuring on a financial situation. And sold everything....Happy being Debt free now but not so happy to downgrade. New s10 setup PIONEER PREMIER FHP800BT 4 RE SX10D4"s 2 Planet Audio BB2400.1s 4 Locally built 1200 cca Thomas Batteries 2 ACdelco AD230 200amp alternators And all the trimmings Will get some pics and specs up on into the week. Im thinking it should turn out quite nicely but im sure it will not be near what i had. But its all gravy

Box is for (2) 13W3v3 at 4.5 cubes after displacements @ 32hz. Building for my neighbor!! So check this, my neighbors buddy J had 3 w3's and blew 2 of them.. he didn't want to wait for the warranty, shipping back and fourth and what not, so he bought new ones and gave Mike (my neighbor) the blown ones for free, then mike sent them in for warranty and got new ones.. pretty legit, huh? Design by DL Designz (contact information in signature) It starts NOW

I have one XL in, the other one should be here in a couple days. Waiting more paypal to clear then my stetsom 7k's will be on there way. I will be wiring one stetsom too 1.4 ohms for daily use and will be wiring each stetsom too .7 ohms for burbs at shows. I need to get one of the stetsoms repaired will cost $300 too get it fixed. Constructive feedback is welcome!

This isnt gonna be anything crazy but heres what i got so far. I got polk audio 2ways in all the doors, pioneer 5200 HU. Over the past few days ive been laying down Fatmat rattletrap in the car. I got the whole trunk done with one layer and the outsides of all the doors are done too. I was thinking of doing the roof or the floors but im lazy and dont wanna rip it all apart. I only took a few pics of the trunk and dident get any of the doors (sorry). I have just ordered an FI SSD12 and will be building a box this weekend for it. Its gonna be sealed 1.25cubes BEFORE displacement. I'll try to take some good pics during the build. Thanx for looking and here are some …

I started on a new sub box for the RE SX15 in my 98 jeep grand Cherokee yesterday. It's 4 cu ft net tuned to 31 hertz, sub firing up, slot port firing back. This was my first ported box build, and came out alright. It still needs alot of finish work. I'll post pics later today.

Okay, this is my new topic, because old one was messed up. Here are some info about stuff i have Head Unit: JVC MP3, KD-G401, 4x50W Wires: Ground Zero 4 Gauge Wire kit Front: Signat L13 midwoofers Tweeters: None (coming) Back: Pioneer TS-A6911 6x9" Subwoofer: JBL GTO 1514, 15" Amplifier: Kenwood KAC-9104D, Class D monoblock I also need other amplifier to my back speakers and other HU because when woofer is hitting it can't read CDs. Here is my current setup. Here is a picture of hole between trunk and front, i need tips how to make good box for this, to get all bass in the front. I hope you understand my english, i will also keep uploading pictures o…

This is the optimal design for the X Con 18. My BTL 18 is going to be going into it. I got the design from the site here, thanks SSA! I've still got a lot of sanding to do. I did all of this last weekend. I'll be finishing it up this weekend. I've still got a lot of wiring to do. I've got a 270 amp Mechman alternator to put in. I've got 50 foot of 1/0, which I'm hoping will be enough. I think I'm going to use my starting battery I've got, a Napa 70 series or something, I'll have to look at the specs and post if anyones interested. I've got a big Wal-Mart brand battery with dual terminals I'm going to put in the back. I'll probably eventually get some better batteries once…