Build Logs

So for those of you that may not of seen the other post, this is whats going in there 2 sa 12's in a box tuned to 28-29hz before car peak 1 jbl baby crown amp the 1200 one 1 autotek 4 channel for mids and highs 2 mb quart 6.5 component sets 1 for back and 1 for front for mids and highs 1 pioneer avh-5700 50 feet of 1/0 for power extra battery Here is me getting started

taking back seats out: interior panels gutted: starting the frame for the box:

Hi all. I started this build over Christmas break for one of my roommates. The box is 4.8^3 ft after all displacement and tuned to 23Hz. I picked up a Stereo Integrity Mag D2 15" subwoofer off of here from a member. The amp is a 500w O Audio plate amplifer. The goods: The build: Sadly I don't have pictures of the round off I did on ALL of the corners. The paint and the install: That's it! The partial review: I have yet to really put this thing through a whole movie, but I have picked out a few of my favorite scenes from Lord of the Rings. I chose the scene at the end of the 3rd movie right before Sauron is destroyed. I'm able to compare …

so just came in the mail.... 2 15's soon to come is a saz1500d. so here are some pictures or random chit as it happens i guess.... thats all i got.

Hello and welcome to my daily headaches! I'll start this build log off with my past setup, my current, and finally update throughout December as I work on probably the furthest this little Civic will let me go. My instagram: https://www.instagram.com/joshdashef1/ The Past Build: Head unit: Pioneer 80 PRS Mono Amp: Rockford Fosgate Prime 750.1 Subwoofers: Rockford Fosgate P3D4 12" (two) Kicker 4 gauge amp kit OFC Stock Electrical (alternator included) Did do the big three sometime between here and current build Prefab Box: Q-Power Box (Dual 12s) Tips: Tesa taping RCA's, Marking RCA's Low/Mid/High or similar, …

Started the Highs for my car. Subs and sub amp have been removed. right now is just highs and mids. CDA-9887, Sundown SAX-100.4, Kicker RS6.5 comps. Now i'm trouble shooting the setup. And the sundown is running hot. So its been an intersting day. sigh was taken with a cell phone. so quality is pretty crappy

I started on a new sub box for the RE SX15 in my 98 jeep grand Cherokee yesterday. It's 4 cu ft net tuned to 31 hertz, sub firing up, slot port firing back. This was my first ported box build, and came out alright. It still needs alot of finish work. I'll post pics later today.

Greetings and salutations beings of the internet. I come bearing random thoughts ramblings and a build log. This will be version 3 of my 2004 suburban. The setup: Sony XAV-701HD Stevens Audio Full Size Horns Beyma 8BR40 8" Mids Arc PS8 Bazooka MGA series Amps Stereo Integrity DS4 18 sealed 6cuft This is also the simplest iteration. I employed the KISADUWDATTDT method: Keep It Simple And Don't Upgrade When Done And Tune The Damn Thing. Just a little FYI the horn install happened a few years ago. This a compilation of a build that spanned a few years. Up first are the horns. You've seen one you've seen them all but just in case here is a pic.…

HOTDOG's Build Log The Equipment Used Rockford Fosgate T10001bd on two 12" RFR2212 Fosgate Power Series rated at 1000rms 2000peak Sundown SAE1200-D on two 15" RFR2215 Fosgate Power Series rated at 1000rms 2000peak Rockford Fosgate 500x rated at 75rms x 4 @ 4ohm or 150rms x 4 @ 2ohm (on the following equipment) one Set of Rockford Fosgate T1 Tweeters Two sets of Rockford Fosgate T1 6x8 in the doors The Head Unit Alpine CDA-9856 Here is my Stock Alternator Here is my Stock Battery The Big 3 THE BOX The Cover and Box you see here will be wrapped in leather this summer to match the interior The Amps Installed

i just started my build today. rain slow me down a bit but still got some good stuff finnished with a small amount of time. this is my first big build. I am doing pretty good i think lol ~pre-head unit~ ~old head unit just until the new one got here, i got a new pioneer 6100BT *ill get a pic up soon* ~just got the back hatch for my trunk done ran out of day light and energy~*not bad for the first time useing dampener lol* ~battery befor i did the BIG3~ *there was a small wire going from a fuse box above the battery to the battery i dident change the size just put some new wire* i have some better battery terminals comming also alot more to come. just got the car las…

Hey Everyone, I decided to start my build log now... Thing's are starting to come together and it's close to rebuild time. This is going to be my Third build for this Car and hopefully my last one as my goal is to pay off my Envoy and make it my show/fun car, and buy my Lexus IS-F that I always wanted. I would like to say THANKS to Jay-Cee for helping me every step of the way!!! Thanks SSA for giving me a great place to learn and meet some cool people and make some great friends! Special thanks to Andrew @ Argent Audio for being more of a friend then a guy who just is looking to get my money (witch he did anyway's lol). Argent Audio has showed me outstanding customer ser…

I Recently decided to change my setup and go with a little more. I loved my 18" BTL, but it was time for a little more. I am keeping most of the things from my old build but added on. my first build 2X Saz-2000D Strapped at 1 ohm each/ 1X 18" ascendant audio Mayhem XS D3100 battery 2X ascendant audio 7" Mid-bass drivers 2 pair of ascendant audio tweeter's more to come as i order hopefully going to start putting things together soon, waiting on a few more things to come. More pics soon!!

What's up guys so I started construction and completed my box for 2 12's. Gonna be used for dss ethos 12. Port is 4x20 and box net was 5.99. I used 12volt to see how long I need it for 32hz. It said 27.75 but I rounded up to 28. But I wasn't too sure on how to go about it since it's gonna have 2 bends. I researched it and it sounds super confusing, some saying gotta have the correction part at the end. But I found some that said just measure up the middle so that's what I did to achieve 28" Could you guys she'd some info on if it's correct. If not, could you tell me what frequency I'm at. Alright thanks guys

Alright, so I started my box build yesterday with a buddy of mine. It's 5.5 ft^3 roughly. It's sealed with a downfire mounted subwoofer. The subwoofer, as stated in the description, is a Dayton Reference HF 15" and will be powered by a Bash 500w plate amp. (4ohm) DAY 1 It was about 90 degrees yesterday with 94% humidity. Needless to say, we were a little warm. Just some scrap that we used from my first box build. Just mocked it up. DAY 2 Just had a little bit of time to work on it today. Here's a pic of the amp. And here is the only piece of wood I actually cut tonight. This is obviously the back plate. I plan on using an oak Formica to match my living rooms…

As the title states, gonna fab an iPad2 into the dash bezel of a Hummer H2. To do this, I will be deleting the row of 12v plugs at the bottom of the bezel. I will be deleteing the On-Star. I will be moving the HVAC controls to the very bottom. Fabricating a single DIN Alpine HU mount right above the HVAC controls and below the iPad. Relocating the 4 wheel drive controls and the load managment controls to the underside of the steering column panel. And then of course making a motorized mount for the iPad2. Sounds like such fun doesn't it?

Box is going in a Tahoe. Fi BL 15 5.0cuft NET @32hz using 108.5sqin of port. Awaiting Hunterp223's approval.

My little brother is putting a system together for this years competition season. He will be competing in USACI's street beat. Its a 2003 (I believe) Hyundai Accent. He is using a real basic pioneer deck for now with an update in the future. Two runs of 0 gauge running back to a single US-AMPS 6000 pushing a single Hyfonics Goliath 15. Here are a few pics of the progress so far. We are a little behind because of orders not coming in, but it should be done in a week or so. I used the RFL for comparison only, its the first sub to come close to its size but still just a little bigger. We are finishing the trunk in black suede and the amp will "float" behind the …

So i just started my build this weekend(tue-wed)for me. The build is simple, not to much to it. 2 Sundown Audio SA-8's Dual 4 ohm 1 hifonics brutus 1200.1 1 xs power d1200 batt. That's all the new stuff i am getting. I already have 1 d1200 under the hood and a 300amp custom built alt. This is going to go with my 2 sets of massive audio rk6 component's and my massive audio 4 channel with a pioneer touch screen dvd3100.

Words cannot explain the satisfaction of having a box that is built exactly to a sub's liking! lol I hate that we didn't just do this first! lol My teammate Anthony threw this together for me with what used to be the 3rd row wall box. All birch.....S port ....double baffled box....4.5 net tuned to 28hz! This thing is sex!!!!! It needs some paint or carpet or something to pretty it up...but that is no concern right now! lol Some of these pics i have posted already on a couple forums....but here they are again! lol Video is uploading now!!!! And we might throw her on the TL tomorrow! Compared to old box....

So I should formally introduce myself, the name’s Sami O., I am a citizen of the mighty (or mightily small) country Finland. I live with my fiance, and my dog. Im big into fishing, as well as car audio and electronics of all sorts. That’s my dog out on the boat, hes a cool dude, and loves to be in anybodys lap. I started doing car audio work professionally at the end of high school, and went to college at Rensselaer Polytechnic, before going overseas to begin my military service. I am 26 now, I work as an organic chemist at Connecticut College, and still maintain my car audio career as well. I served in the Finnish military and am an active U.N. reserve as a mobi…

Update: Replaced interior carpen and I'm painting all interior plastic pannels to match Painting the pannels Almond. teplaced carpet with used carpet from a house. im sorry folks but i dont have the money to buy new carpet. so dumpster diving was the only way to go. decided it was time for a back up camera system so i started the console for the screen to mount in. im just going to build around the stock interior parts. probably going to paint this part black to match the area where the A/C controls and the HU are mounted. had debated using fiberglass to do the console but with all the extra OSB lating around the shop. i went that route instead. and besides. id hate to…

im building a ported box for my blaupunkt 12inch vw1200 sub. it is powered by a audiobahn a8002t amp. it is in a sealed 1.25 cu ft. box but i am looking to build a 1.98 cu ft ported box. so i have alot of questions. first off any of you like blaupunkt? how big should the slotted port be (1 or 2 inches)? also i plan on painting the box first with a oil based primer and then with a automotive paint since i have alot of a sky blue paint left. also i plan on putting the sub to the very right of the box and have the left side of the box ported. also i have no idea on how to tune fequencies if someone could explain more in detail for me. i will post pictures soon. should come …

getting started : getting a dubble sided flared port in there : worked the horizontal bracing open and added the first layer of triplex : after a few layers : getting a layer of triplex on the top and bottom : the result: painted black : the end

http://fresnoracing.ipbhost.com/index.php?showtopic=30159 Please follow the link above. Be ready to load over 110+ pictures of the buildup so far. Here is a diagram for the cooling system. I encourage you too keep checking the thread for updates. Thanks for looking. http://fresnoracing.ipbhost.com/index.php?showforum=32 Click here for other installs and projects.