Build Logs

This isnt gonna be anything crazy but heres what i got so far. I got polk audio 2ways in all the doors, pioneer 5200 HU. Over the past few days ive been laying down Fatmat rattletrap in the car. I got the whole trunk done with one layer and the outsides of all the doors are done too. I was thinking of doing the roof or the floors but im lazy and dont wanna rip it all apart. I only took a few pics of the trunk and dident get any of the doors (sorry). I have just ordered an FI SSD12 and will be building a box this weekend for it. Its gonna be sealed 1.25cubes BEFORE displacement. I'll try to take some good pics during the build. Thanx for looking and here are some …

Well the time has come for me to go ahead and show some progress with the truck. This thing has been through hell and back with me from repairing the lower intake manifold to having its fair share of abuse from low tuning. The first setup consisted of 3 18's on 2 AQ 2200's strapped with a single XS D3100 in the back for support. Let's just say this didn't work and had me reconing the subs. Best recorded score of the 3 18's before blowing them. Sadly, I bought an alternator that was actually sitting in the backseat at the time I was giving a demo and blew the subs. Unfortunate for me, it was a fuckin Tenney that didn't work! It looked nice and legit though.…

Well the time has come for me to go ahead and show some progress with the truck. This thing has been through hell and back with me from repairing the lower intake manifold to having its fair share of abuse from low tuning. The first setup consisted of 3 18's on 2 AQ 2200's strapped with a single XS D3100 in the back for support. Let's just say this didn't work and had me reconing the subs. Best recorded score of the 3 18's before blowing them. Sadly, I bought an alternator that was actually sitting in the backseat at the time I was giving a demo and blew the subs. Unfortunate for me, it was a fuckin Tenney that didn't work! It looked nice and legit though.…

Sup guys. Any and all suggestions/comments welcome! Ok this will be a long build w/ occasional updates. There will be 2 Rockford Fosgate Power 1000's Powering front stage (undecided) and 2 Fi Q 15's. This is a VERY small truck, so it will be close to a wall, but not really. Each sub will have it's own 4.05 cu ft box tuned to 29.78 htz. The two boxes will go side by side facing forward in what used to be the back seat (taken out). It has a 170 amp alt and a Autocraft Titanium Battery. All wiring will be in 1/0 KnuKonceptz (including already done big 3). Kenwood Excelon KAC-591 h/u... Already got both subs and one amp. Need to get the other amp. Truck has 2-5 layers of Dyna…

Ok my brother is coming home from iraq and I would like 2 build him a box as a suprise he has a bramha mk2 15 here are max dimensions looking for a ported box please help I've tried the box builder websites and I get more frustrated than accomplished everyone here seems 2 be super helpful 23.50 tall 21 deep and 38 wide using 3/4 mdf I really appreciate the help everyone and anyone u can post here or email me [email protected]

Watsup guys...I'm coming from 2 JL AUDIO 13w7 to 2 15 FI Q fully Loaded dual 2 ohm voicecoils..Hopefully i made a right choice. Im trying to stay with SQ. I have a 2004 GMC Envoy and wanted a vented box for it... I plan on using it as a daily driver maybe tuned to around 32hz or 33hz.. Trying to hit THREE SIX MAFIA-LATE NIGHT TIP ... The amp i will run is a KICKER 10zx2500.1, AudioControl EPICenter & a clarion 3 way crossover. Also i have a 250 output alternator with the Big 3 done. I'm also using a XS POWER D3100 in the back with a 500amp Isolator/Relay up front. I really want the two subs and port to face up towards my roof, or unless have a better idea, thats just…

As you read in the title and description I'm getting a Fi Car audio BL 15 and just need suggestions on what options I should get and dimensions on a box that I should build. I've got a 1994 extended cab F-150 and in the back have appx. 18x24 for the base of the box and wanted to know how tall I should make the box and how big I should make the port to tune it to 32 Hz.

I'm trading my blazer for a ex.cab s10 tomorrow and need help with designing a box for my two hsd3 12's to b tuned at 30hz gunna push them with a 2000brx.1 amp s10's a 96 please help wanting subs to face roof I'm new to box building so cut sheet and a few blueprint pictures is greatly appreciated

So i just purchased a 12" fi q and while i wait for it to come in i would like to build the box for it. I want to build a ported box that will give it a real good sound when it pumps but i don't want it to but too large. If anyone has plans of their own or can suggest a site where i can get them for free (or fairly cheap) that would be great.

figured i'm sitting outside the court house wasting time waiting for someone so i might as well type something up here. Current set up is an alpine cda9807 hu. Front door speakers are cdt cox622. The rest of everything now is still bose stock with an arc 4150 xxk already bought for powering the front doors and the kappa 692.9i.'s i've already bought as well for replacing the rear 6x9's. I'm keeping the rear deck 3's and front pillar tweets stock and keeping them powered by the bose amp. Sub change is in progress but i'm leaning to an fi q or sundown z15. Currently have a re se-xxx 12 powered by an audiopipe ap1500. Already bought amp replacement for the ap and have an ar…

Just doing a basic build for my work truck. I've had several build in this truck buy never a nice, complete, good sounding build. No numbers, nothing crazy, just clean sound. I chose to go with B2 on this build. Clarion double din. 1 deka g34 in stock location. 1 extra Diehard platinum under hood from the camaro. (truck has two battery positions. B2 Quattro 4 channel B2 Quota mono. 1200w @ 1ohm 2 sets of B2 components for the 4 doors B2 Reference 10" sub.

so here is kind of a work log for the new bass i gots goin on. The box was designed an built by Rich aka Stratusrt01. it's by far the best, loudest, cleanest box i've heard for a single 12. I would extremely reccomend getting a box from him. the butt end tinsels portage (don't mind the small pile of dust also ups kinda dinged the box and ripped the carpet by the port, not Rich's fault) and full trunk

http://i1227.photobucket.com/albums/ee440/IHUNTEI2/civic.jpg this thing should get nasty with one sa-12

gotta give a big shootout to robin (iamamp3pimp) for helping me with this, he does GREAT WORK!!! so if you need some work done hit him up.... and this is a shot of the first 3piece put together with my new table saw. holy hell this thing is accurate. Strange looking end grain from lowes Lumber department..... Double Baffle, Split front baffle, etc. Edges rounded over 1/4 inch for 2 Nightshade 12's and 4kw Thoughts?

Sup folks? I took out the dayton ho 10s and cadence txa6004s to downsize some. Purchased a Kicker 06ZX700.5 for amp duty and (2) Sundown E8's for subs. decided to run them sealed since the objective was to save space. guess we will see if i can deal with it. lol. so equipment will be alpine 9887 (running active 2 way front stage) kicker zx700.5 mach 5 mli-65s in factory door location (well deadened) seas neo textiles in the kicks 2 sundown e8's Goals for this were to downsize and save some space and still get decent output, and clean up the wiring some. Will eventually pull the 0awg and go with some 4awg (for now itll just be the 0awg to a dist. block with 4 off of…

Starting a build log for my 1995 Cadillac Eldorado. Will use Pioneer Head Unit, Blues speakers, and Linear Power amps. Working on it as I have time, will update as often as possible.

Start with pics of new components,sub & amps. More pics to come as build progresses.

Starting a new build for the gmc sierra. .went from two audioque hdc4 18's to 12 skar zvx 8" subs..

First and foremost big thanks to TMH for designing and building the wall(I helped but he did most ) lol Tested at 150.4DB @ 31hz sealed legal on TL. Truck now peaks at 30-31hz. Also did a 151.8 outlaw... Set up; Head unit(s) Alpine 9887 in front Alpine 9833 out the rear -------- Front stage 2 DD 6.5 components in each door Crunch GP 1600.4 amp -------- Rear stage 1 DD 6.5 component set Crunch GP 700.2 amp -------- Sub stage 2 18" AA mayhems D1ohm ~16.5C.F wall tuned to 28-29hz 4 6" Aeroports 2 Hifonics XXV volossus amps 12 Panasonic AS00815-1 28ah batteries in the back DC power 320a alternator 2 runs 3/0 welding cable Now onto the pics.... http://i108.photobucket.com/…

https://drive.google.com/file/d/1vLS1CNXDIP4PU7HHWnsw0193fRfQ9-sZ/view?usp=drivesdk my "new" 2003 s10 blazer 2wd. 75k miles. Zero rust. From out west (I'm in Ohio lol) going to order my singer alt tomorrow. Either a 370 or 390. Then the fun begins!

Well, its vacation time for me again. That can only mean one thing. I've had most of the equipment for some time now so there is nothing too new. My CDA-9835, freshly repaired and ready to rock. RE 6.5 components, need to redo some aspects of these kicks. View straight back from the passenger kick through the trunk, all passenger seats removed, the only one going back in will be the front passenger. My fully loaded 18'' BTL. Refurbished KX100.2 without its end caps on. New wiring, all Knukonceptz. Still awaiting my excessive amperage alternator, figured I've got most everything I need to get jumping on this.

http://www.youtube.com/watch?v=GG_XK_2Heuc 10 of the 12 batteries I got a few days ago, sold 9 yesterday. The other three are for the civic. The car after its first car wash in 6 years

Mk so i am going to be making build log for my new build. Im going to be going from my current setup (see sig). And my new setup is going to be. (2) BL 18 (2) Sundown Audio SAZ-1500D (2) PowerMaster D3100 (1) Iraggi ALT 200 amps (1) Clarion EQS746 Lots of 1/0 Gauge wire and alot of secondskin Damplifer Pro This will all be going in my 96 Nissan Quest. I hope to get some hair moving . Will be starting the build soon.

well my brother had a bright idea that he wanted 8's in his doors for mid bass....i have one door ready for paint and still have to start the other since he drives that car daily....here are some pics of what i have gotten done and will post more up as i progress with the build.....