Amplifiers / Head Units / Processors / Electrical

Just wondering if anybody knows anything about the Rockford Fosgate RF-BLD. it says install it as close to the source unit as possible, why is that? Why can't it go in the trunk by the amp?

I recently bought a kinetik hc2000 from amazon.com, price wasnt too bad at all.. now im looking and there out of stock for a while, dont know when they will have more. shipping is estimated at 1-2 months,.. i cant wait that long lol.. Is there anywhere else you guys know of to purchase these battery's at a good price?

sx

so i got an offer ona kinetic hc2400 for 200. sounds like a good deal to me.... but i heard if you plan on running a H.O. alternator it will kill the kinetic batteries. Is this true? I wont know if i even need an alt untill i get the battery installed.

ok so i done some trouble shooting to figure out why im still getting voltage drops, light dimming, and why my subs turn off when i play heavy bass songs, and this is what i came across so today i measured for bad grounds, first i measured the battery with the car off, 12.6volts. secound i measured from the neg side of batt to chassis ground, got 0.01 as a reading on the DMM, so that means mininum resistance which is good right? i turned my car on, turned on the wiper blades front and rear, turned high beams and headlights on, and put my heater on MAX i put my HU to about 26/35 and measured the battery and it never went less than 13volts so with everything still on, i me…

right now, i have 2 12" kicker CVRs, in a ported box, with a kenwood 600w amp. i had a xplod 1000w, but when it got too hot, it cut off and i couldnt do anything.but the kenwood still cuts out, but i can keep listening but at a low volume. but i went to the pawn today, and i found a few bigger amps... which would be the best? Almani 1500w Class "D" Kenwood 800w (mines kenwood 600w) Infinity 1600w Power Acoustic 1600w kenwood looks real small,the power acoustic is the biggest in size,if any of that matters, and almani sounds good with its class "d" thing, and is second biggest in size. but i dunno what that means.

i dont know if this is the right spot to post, but i was just wondering if there is anyone out in northern cali, the bay area, or near the vallejo/fairfield area, that has a O-scope that can charge me to set my gains on my amp. the right way?

I have two d2 subs (d1.4). I have two IA 20.1's should I strap them at 2 ohms or run 1 sub pre amp at 1 ohm?

i wanna see some opinions on yellow top batts vs kinetik? im soon gonna be in the market for 2 new batts(one in front and one in back). you can see what im running in my sig. thanks for any suggestions.

Ive been lookin around and not finding much of what im looking for. Im going to need one of those volt meters like the infamous "stinger" one everybody seems to have.. problem is that thing is ugly as can be and too flashy for me.. the whole big bright stinger thing isnt for me. I would prefer a small, simple voltage meter i can mount anywhere i choose. If someone can point me in the right direction i would really appreciate it. thanks

I got a saz-2000d pushing a dd9515g at 1ohm. I was wondering if a kinetik 1400 upfront and a kinetik 2000 in the rear would be enough to help run the system. Big 3 has been done with 1/0, I have 1 run 1/0 front to back, grounds done with 1/0 and a stock alt 90amps. Any recommendations will be taken in consideration.

What's the difference in performance between the MB Quart 1500D and the Sundown Audio SAZ-1500D considering there's almost a $250 price difference?

Just wondering, when connecting from engine block to chassis ground, can I mount from the air compressor bolt to chassis ground? the air compressor is all metal, so i assume its grounded, since it lays on top of the engine. thanks in advance

hey all, im in the process of trying to possibly put a xcon 12"/sundown 1500 setup in my car. its a 95 camaro. well my charging system is shot i need a battery and alternator ANYWAY. can someone steer me in the right direction as to what battery and alternator i would need to power the stereo and car. ive heard a lot of bad things about the optima batteries so are there any other options?

I was at wal mart the other day picking up some speaker wire for an install i was doing for a friend. I was looking at the HU section just out of curiosity. I found a unit that is made specifically for iPod/iPhone playback. It had a FM tuner, aux in, and the faceplate flips down with a iPod/Phone docking station. I put my iPhone on it to see if it would work with it. It charged my phone and played the music just fine. The price on this unit was 100$ even. I know dual is probably one of the most frowned upon audio companies out there.. but I've been looking into a new HU with a budget, and 95% of my music is played from my iPhone, so I dont need all the fancy features. For…

Whats the difference between the Kolossus Fleks Kable 1/0 and the normal KLMX Kable 1/0?? Other than the Kolossus made up of pure copper are the strand counts different? Also Isnt the normal KLM Kable just as good as kolossus? Material wise except flexibility? Thanks. Just wanted some clarification.

I just got an ASI equalizer for 25$ from my friend. Is it a good processing unit? Anyone know any info about this company? Its the ASIPE 1 7 band equalizer.Here

Here is my set up HU - 880PRS Sub - IDQ12 (DVC) Front - HAT "L" 2 way (coming soon) I was thinking of running the 125.2 bridged 4-ohm to the IDQ (350w) 100.4 Channel 1 and 2 to run the tweeters in normal 4-ohm (90w) Channel 3 and 4 bridged 4-ohm into the 6.5" mids (320w) Can I run the 100.4 in regular and bridged mode at the same time? Does this set-up make sence?

What do you guys prefer... Rockford or sundown

Does anybody have any idea where Sundown Audio amps are made ?? t Thanks.

I picked up a DMM the other day and have been reading up on setting my amp gains. I came across this the other day: So my question is, is it still safer to set your gains with a DMM than by ear?

what are some of the best amps i can push 2 15" juggernauts with alot of wattage for a good price?

I'm kinda debating whether I should go with a Rockford Fosgate 2500-1bd for my 2 Fi Bl 18"s or should get 2 Rockford 1500-1bd what you guys think? Can the 2500 have enough power for them 18"s or will I have to buy 2 1500??

i have two decks laying here that i can pick from.. i have a Alpine cda 7875, or i have a kenwood kvt-617dvd. if you had to pick which one to use what would you pick an why?

Hey everyone I was just curious to see if anyone on here run's these amps or has had experience with them? I just installed mines today and it works like a champ, its used BTW but I was wondering if these pigs usually run on the hotter side? After about maybe 30 minutes of play time after hooking it up it was kinda hot, not hot where U couldnt touch it but not really warm either. So after about an hour and a half worth of playing its still working, it hasnt gone into thermal protection mode, But I was just curious if this is normal for this amp? But then again it is 2 amps in 1 chassis. LMK if anyone has input. thanks