Amplifiers / Head Units / Processors / Electrical

My friend wants me to put these in his truck and I want to get everything out of them both. The sub is single 2 ohms 300 watts rms, and the amp is 300 watts bridged at 4 ohms and 150 wattsx2 at 2ohms. Is there some way i can wire it to get the 300 watts or is he going to have to deal with the 150 or get new equipment? Thanks

How much wire should i purchase from knukonceptz for the big 3? and should i get the 0 gauge or will the 4 gauge be just as good? I have a 12" fi bl on a sundown saz 1500d in a 2 cuft box tuned to 35.5hz. thanks

i got a md1d amp from usamps it has a bass knob with a little led light in it does anyone know where they sell a led bulb that small so i could change it to a different color?

Thinking about upgrading my head unit to something that is ipod friendly with good sound quality and high pre-amp volts. Eclipse Cd 5030, Jvc Kdr 900, Clarion Dxz 785 are some of my choices, my brother say i cant go wrong with the eclipse, suggestions and opinions will help very much. Thanks alot!!!!!

Alright so my Fi 12 D2 q should be arriving tomorrow. I arleady have my Sundown Saz 1000D. I've been reading as much as I can on here so I just want to make sure I have everything straight. Wiring my sub to 1 ohm I need to take the positive's and run a wire from one to the other andsame for the negatives. Then take a wire from one of the pos and neg's and run them to the amp. I noticed the amp has 2 sets of speakers inputs A & B. I would hook my sub up to one set correct A or b? As for setting up the amp I have a Alpine CDA-9884 it has a subwoofer level 0-15 if I understand this I put the subwoofer level to 15, bass to 0. Take 1000wRms x 1ohm load, Square root of 1…

what do i need to get for two 18 inch fi btl subs im kinda new at this

In testing for competition, MECA enforces fuse sizes for specific divisions in your class. In testing, if you are trying to pull 2-3x the fuse rating of your inline fuses.. and they keep popping, can that damage the amp? I haven't started yet but i was thinking the amps would be susceptible to low voltage conditions at high volume when the fuses pop and could eventually cause damage, maybe immediately. Is this true?

I came across Powersurge batteries on the net and after reading over the page and talking to the owner they seem to be pretty legit batts. Im posting this because I want to hear from people who have used them, knows someone who has used them and so on. What do you think of these batts? Legit? Pros? Cons?

hey everybody, a buddy of mine is looking for a decent/good quality amp to use for his daily driver. Hes running 2 Kicker CVX 15s, looking for around 4000wrms. He found a Powerbass that can do 4000wrms @ 1 ohm... just looking for some general feedback on these amps performance wise...do they put out what they say they do? Are they reliable amps? etc etc Thanks!

hi guys i recently got 2 18 btls and 2 bxi 2610. now im looking for a ho alt for my opel astra. do you know a brand making a good alt for it?

I was checking out this amp. I remember hearing nothing but good things about their stuff years ago, nothing recently. but I hadnt heard of SSA, sundown, Fi, or... either seen it usually for 260 and up, ikesound has it for 199. Ive seen ratings listed anywhere from 990-1150 watts RMS into 1 ohm. their website as a link to there amps but is loading a blank page for me right now, so I also cant find out if it has a SSF? they any good? put out true ratings? underrated?

Right now I'm looking for an amp to run a single 12" under rear seat of truck. Sub is a rockford fosgate p3, Thought I would poke around on here before asking questions ...

My question has to do with the bypass. If I were to bypass by grounding the parking brake sensor will my rear view camera work? If so which wire am I supposed to splice on to under the dash? I do not need the color wire although that would be helpful but which wire am I supposed to be looking for?

Ok, so basically a gain is this : the voltage from the RCA wires is say 250mV, and the amp takes that and does its thing which would amplify it by say 90dB, which means the subs would be receiving 250mV * 90dB, whatever that is.. and then introducing the gain just increases the voltage from the RCA to the amp so the amp would perceive the RCA to be sending a higher voltage, say 250mV * 10dB of gain, which the amp would then amplify the 250mV * 10dBof gain * 90dB which would then hit the speakers.. Is that correct? All the numbers are just random, just tryin to see if I got the idea..

Yes hello i have a question about wiring i have 2 us amps md1d and 2 kicker l7 15s i have 4ga wiring sometimes my fuse blows every now and then when i turn it up my homeboy has almost the same set up but has 0ga wiring and has not blown a fuse so my question is should i go to 0ga wiring and how should i run it. Thanks

are the new mean machines as good as the ones from like 05-08

If you do not know what these are, i'll explain it then go into great detail about the design application and see if it's what you want... Fluxcaps are not fake, this isn't a movie joke, it is an actual device name given to a special capacitor that does many things- It is a Battery isolator, Voltage Booster!, and capacitor all in one. Standard versions put out a constant 14.7v(some restrictions may apply...) but this topic isn't for 14.7v... this topic is for 18v electrical system. This device can be used on a stock or aftermarket 12v electrical system to bump up the voltage all the way to be able to charge or run an 18v electrical system to get the most power out of your…

well, just ordered myself an older panasonic CQ-DF903U. Ive had a older 6000 model I think it was and a 702 or something and really liked em both, can only imagine that the 903 is better than both of those. anyone have any experience with this on? wht did you think of it. monday I leave for new jersey to work for 3 weeks and have a free place to stay, free food, no utilities, so when I get back Ill have all the money left and should be getting my amp and sub then. amps looking like a SA SAE1200D to power a HDC312 or a Fi BL12. man I cant wait to get it all and get it installed. just a stock 93 accord, wonder how it will handle the current draw. Ill do the big 3 for sure, …

Hello, I've been searching for a long time but what I found seems to be too light : not enough power when I burn it on a cd! Can you give some links, please? at least a 50 Hz test tone for the sub, and a 1000 Hz one for the speakers. BTW, do you all set the gains like that, or can you use some music instead ? Thanks

Has anyone ever used this product? I have 4 saz1500s and wanted to buy this so all the outputs are the same. Would this be a good alternative instead of having to buy 100 y adapters? Is there any other options?

I currently have one d2 ohm rl-p 18 and a saz1000d in my lincoln towncar, but i am about to get an izuzu rodeo due to me getting it for free and because my lincoln gets 10 mpgs. lol. but what i want to know is if i get one more d2 ohm 18 and one more saz1000d, could i strap the amps and power the 18's at 2 ohms? im confused with the strapping thing. thanks.

I drive a 2003 Saturn Ion with a stock alternator 105Amps, I dont compete just daily driving and live in Dallas so my trips can be an hour or more(but not everytime I leave the house). Im planning on doing some electrical upgrades to the vehicle and just dont know how to go about it, so my SSA family help me out. I have a Sundown SAZ-200oD (200A), SAX-125.2 (60A) and a four channel in he future probably SAX100.4(90A), so I wanna plan these upgrades around all the three amps(around 350A, give or take a little) and not what I currently have. Question #1: Do I need an High Output alternator or not, if so I have found a 200Amp one for my car and I will get that? Question #2: …

So I was demoing my Sundown 1500 amp to some guys, and thought I may have heard something that sounded like some slight whirring. I didn't think it was anything to worry about as everything was sounding fine, I turned everything off and turned off the car. When I started up the car the next time: nothing. Checked all fuses, they were fine. Not even going into protect. Any ideas? It is quite hot out there today, as well.

if I could get a brand new one for 215 shipped, is there any reason not to? I know of the SAE1200D and AQ1200D's that are 250 shipped. I have had one of these amps about 4 years ago probably, and really liked it, but are the other 2 choices way better? I know Ive heard alot of bad things about their business pracitces in years past, but just try and think of product ability when you make a choice. not going to buy my subs right now, but figured when the NINe.1 is usually way more expensive I figured Id buy it now while I can get that price.

Well I have been talking about this and other head units on another forum but i want to get peoples opinions on this one. Eclipse CD7200 mk II Would you use this one for the price? If not which one would you go for? What do you think about it? On a scale 1 to 10 what would you rate it? If it could be out done by another head unit what is it (equal or lesser price)? If you would get a cheaper one, which one would you get? What is it missing? and last what are you guys using? I am looking for blue tooth and and iPod connection. I don't care about hd audio and all that stuff. All of this is going into a 2002 VW Passat without a Monsoon system. So the deck isn't quite a doubl…