Amplifiers / Head Units / Processors / Electrical
Discuss Head Units, Amplification, Processors, And All Electrical System Inquiries Here.
5,712 topics in this forum
-
I was doing some thinking.. Taken from http://www.rockfordfosgate.com/rftech/wire_calculator.asp quote: Because music is dynamic in nature, it will be easier for the amplifier to reproduce than test tones. Our testing has shown that it is typical for an amplifier to consume on average roughly 50% of its maximum input current on such. If it is consuming 50% of its max input current on average, isn't it correct to say that when playing music, the amp might have peak outputs of up to 3000Wrms, but on average, might only give out 1500Wrms (over the length of an entire song).. so from that theory, isn't a 3000Watt amplifier better suited to play a 1500Wrms sub?? thoughts?
-
0
Reputation Points
- 15 replies
- 1.7k views
-
-
Hello folks My first time doing this so bare with me please. Now I have an old school ss granite 180.6 someone who actually knows these amps and what they can do lets talk ....
-
0
Reputation Points
- 12 replies
- 3.8k views
- 1 follower
-
-
whats up everyone? so heres a question that i guess is kinda noobish. i recently had some problems with my deck, and after trying to remount it and clean the laser i decided its time to upgrade, so i did. i went from a pioneer deh-3800mp to a deh-4000ub i had in my other vehicle. now, from what i gather, the 4000 is a more powerful output. that said, when i plugged everything in it was significantly louder at the same volume (35). my question is, should i readjust the gains on my amp? i've been fiddling with the deck (still trying to fine tune this one 2Q 1Q 1W 2W stuff), and i can significantly reduce the sub volume, but i'm wondering, should i lower the gains on…
-
0
Reputation Points
- 1 reply
- 586 views
-
-
if im wrong feel free to help in anyway. i assume i would need to upgrade my alternator, just a givin. then add about 3-4 batteries that output that voltage while using a device that seperates the batteries in the back from the one under the hood, but also charges the batteries in the rear. of course whole car can not be ran anything more than 14 volts on a 12 volt system(14.4 was the most i seen but i could be wrong) so the battery under the hood would be different than the one's in the rear. and could anyone fill me in about the missing link module, i know its not good to charge the batteries on 15.4 volts but i think it has a button to switch between from 15.4 to 14.4,…
-
0
Reputation Points
- 10 replies
- 1.1k views
-
-
The amp in question is a Linear Power 4.1HVS taken from another forum.. in the highlighted section above, i know there is a flaw in the maths.. can anyone please point it out for me??
-
0
Reputation Points
- 11 replies
- 4.3k views
-
-
I'm looking at this kit for my 96accord to wire an SAE-1000D in my trunk to an ssa icon. Its the first time I'm doing anything like this, so I am trying to ensure I don't mess anything up. I tried to search but didn't find anything. http://www.knukonceptz.com/productDetail.cfm?prodID=KFX-AK4 and this one http://www.knukonceptz.com/productDetail.cfm?prodID=KOL-AK4 The only difference I see is that the cheaper one comes with a 5m RCA cable instead of 6m, and also says the RCA has a built in turn on lead. So if I go with this one, I will have absolutely everything I need to wire my sub amp. And with regards to wiring, I have to keep the RCA and power cable separate, cor…
-
0
Reputation Points
- 7 replies
- 5.7k views
-
-
Hey guys,I'm purchasing a few things for my 2003 GTI and I was wondering how much of a difference (quality wise) a head unit would be. I was suggested Alpine CDA 9887, but was wondering if it would really improve the sound, or should I just stick with something cheaper, since I am in school and kind of strapped for cash to get a head unit with all that stuff. What I plan to purchase: Helix HXS 136 Esprit Sundown SAX-125.2 Fi Q12 Diamond audio D3 800.1 or Sundown SAZ1500D(used) Cheers!
-
0
Reputation Points
- 2 replies
- 562 views
-
-
I've been searching for a while but can't find what I'm really looking for. I'm looking for a headunit with about the same capabilities as the H701. Currently I have Peerless 8s in my doors (going to seal my doors soon), seas tweeters and 4 inch speakers in sealed kickpanels, and four Sundown audio 8inch subs on the rear deck with a sealed box under them. I planned on 3 way active front stage and the subs (so would that be 4 way? haha..idk). I bought the H701 and controller from a guy on here last year but I'm not done with the install yet so I havent started using the H701. I need a new headunit because my old alpine is dying slowly. I've been searching around f…
-
0
Reputation Points
- 3 replies
- 646 views
-
-
When you go to knukonceptz.com to order wire and it asks for qty does this mean feet? The wire I'm ordering is $1.75 for 1 qty so I guessing this is the price per foot?
-
0
Reputation Points
- 4 replies
- 665 views
-
-
My Memphis 1500 crapped out on me so i'm in need of a new amp. I was looking at either a Clarion DPX11551 or a Hifonics BXi 2610D. Both are going to be run at 2ohms. Any pros or cons on these amps?
-
0
Reputation Points
- 15 replies
- 1.3k views
- 1 follower
-
-
I was telling my dad how i am going to buy another battery for my truck soon, for audio, and he said that he thinks putting the battery in the cab is illegal? I'm not sure why it would be and i have seen almost everyone on here put them in the cab. Is it illegal? I live in Texas if that helps.
-
0
Reputation Points
- 11 replies
- 1.1k views
-
-
I am using two of these from 2003 or 04. They are the silver heat sink with the blue light up logo. Here is my set up, I have 1 ea. dual 1 ohm woofers wired to 2 ohm on each amp. I installed the 2 15" SSA xcons in the enclosure that Quentin built for me and I have spent most of the afternoon trying to tune this. I honestly have been very dissappointed as my output has been very modest for most of the day, but I switched the phase switch to 180 on one amp and WOW it woke up big time. So, I did the same thing on the other amp and my stuff is banging really hard now. This is more like it. My question is, why is this making such a BIG difference? And, do I risk damaging my xc…
-
0
Reputation Points
- 8 replies
- 1k views
-
-
k, well i went and got a dual 30amp fuse power dist. block. i got questions that need sum answers. 1.) how do u wire up a capaciator with the dist. block? 2) and i was wondering if i need a fuse block as well? since the power dist. block has dual fuses then i thought that i wouldn't need that. 3.)how do u wire up 2 rcas from the deck to 2 amps? the deck only has one set of rcs. but i have 2 y spliters layin around. how would i hook them up? thanks.
-
0
Reputation Points
- 14 replies
- 1.1k views
-
-
Needs to have gps navigation, touch screen, and a good set of features. Budget is around $1200. Fire away.
-
0
Reputation Points
- 3 replies
- 752 views
-
-
k. im pretty sure i didn't set it up 100% right but thats why i wanna check before i get my new subs. i got 2 amps. i got a 500 watt insignia 2 ch. bridgeable amp and a 1000 watt 2 ch. bridgeable koiiler amp. i think its a 4 gauge wire with fuse wired from my battery to my 1 farad cap. then grounded the cap and attached another power wire from the cap to the 500. then i added another power wire from the cap over to the 1000. i split the blue wire from the 500 from the deck to the 1000. then got sum rca's from the output on the 500 over to the input on the 1000. i kno its confusing but im trying to list it as best as possible. its hard to explain. but its alot cleaner se…
-
0
Reputation Points
- 10 replies
- 749 views
-
-
Ive always had my wires installed for me but Im doing it myself now. Im puting in a Sundown 1500 in a Explorer. What all do I need? 1/0 ga wire, dist blocks, circuit breakers, etc??? I want to use Knu wires so if theres a link to a complete amp kit that would be fine.
-
0
Reputation Points
- 12 replies
- 943 views
-
-
I'm looking at getting a headunit to play my ipod and cds. I don't want bluetooth, or anything else like that. Having an aux input could come in handy if I want to plug in my phone (blackberry) and play music off that. I'll be powering my stock speakers in my 96 accord sedan off the headunit, and then will have a sub hooked up to it (SAE-1000D to an SSA Icon 10"). I already ordered the amp from db-R and the sub/box from Quentin. Anyway, Crutchfield has the Pioneer DEH-p6000UB for only 150, which seems like a great deal? http://www.crutchfield.com/p_130P6000UB/Pi...tures_and_specs I was also looking at the pioneer deh-p510ub for 185 at sonicelectronix or woofersetc. I'v…
-
0
Reputation Points
- 0 replies
- 520 views
-
-
Trying to figure out what size alternator I'm going to need and how many batteries I'll need. I'm figuring at least a 250 amp alt and 2 D3100 powermasters, plus a yellow top under the hood. Will be running a Clif Designs 4800.1lx and probably a Sundown 100.2 or 125.2. Is there a way to calculate what I'll need or is this all a guessing game?
-
0
Reputation Points
- 7 replies
- 886 views
-
-
When I accelerate really quick my voltage drop to like 12.Didi not do this before big three. Any ideas?
-
0
Reputation Points
- 3 replies
- 633 views
-
-
Hey guys, i was thinking about getting a Powermaster D1200 for my system... As of right now... i have a RF p5002 going to a 12" w3. When i have everything cranked up i notice my lights dimming a little bit... Yes i have factory wiring... but also i have a peice of junk battery (not sure exactly what it is but it was the cheapest thing i could find when i bought the car) although the car does have a 110amp alt. (i will be replacing the battery i have right now) My question is this... Will that help out my dimming situation with such a small amount of power being taken from the p5002. Within the next couple weeks (once my turn comes up in quentins long line) ill be switchin…
-
0
Reputation Points
- 7 replies
- 704 views
-
-
SImple question. I need a suggestion for an amp to power 2 fi q 10's. Car: 2006 Pontiac G6 Budget: $500-$600 thanks in advance ~MadroX
-
0
Reputation Points
- 9 replies
- 1.1k views
-
-
anyone knows the max dimensions of a battery that can fit in stock location? thanks. or anyone know if the yellowtop d35 fits into stock location without a problem? and is the yellowtop + big3 enough for 2200 watts?
-
0
Reputation Points
- 4 replies
- 616 views
-
-
Do they make an LED meter so you can constantly monitor the output voltage of the amp?
-
0
Reputation Points
- 5 replies
- 710 views
-
-
hello guys ! sup bass freakss !!!!!! i have 2xGZRW 30SPL Subs and im looking for a mono which can do 2000W RMS x 1 OHM right ? so 1000x2 or may be 2 mono's each doing 1000rms my budget is maximum = $600 http://www.ground-zero-audio.com/english/05_rw30spl.htm i am thinking to get either rf T20001BD or alphasonik pma1200da ! im looking for both, good sq+spl amp !! please help me with this dilemma im very much confused, been re-searching for 2 weeks now //thanks
-
0
Reputation Points
- 2 replies
- 644 views
-
-
im a noob,and i keep hearing about amps "clipping" what does that mean?
-
0
Reputation Points
- 13 replies
- 1.4k views
-
Who's Online (See full list)
- There are no registered users currently online