Amplifiers / Head Units / Processors / Electrical

any of you guys have any experiance,opinions on this amp. http://www.woofersetc.com/p7750/DTR11700D-...s-Amplifier.htm ive been a fan of Soundstream amps(ive had the PIC 1.1700d and loved it)and really like the way these look.plus i found it on ebay for less than 300 shipped. i plan on running it on a single Fi SSD 18. so feel free to post up you opinions/thoughts.

Hi there. I'm trying to figure out the safest, most cost-effective way to wire two amps, particularly, the remote-turn-on wires. I have seen a lot of stuff saying just wire both wires to the H-U remote turn on, while others say it can burn out the H-U. I'll be using 2 300w RMS amps if it makes any difference...

What kind of amp(s) would be best paired with 2 FI BL 10" subs and should i go dual 1ohm vc or dul 2ohm vc

going to be buying a 10" Fi SSD in the very near future. but i need some help with buying a good amp to power it. i'm looking for decent quality for a decent price. i have no idea where to begin.... any help you guys can give is awesome....

Well today my 5th generation ipod video decided it was going to take a chit. something involving the drive broke off and they want $150 to fix it. I have virtually no cds anymore so this is a very bad thing. I have a 16gb flash drive, and am looking for a Head Unit that has a usb connection so I can try to use this for music. I have never owned one with a usb connection, and am trying to find a quality yet inexpensive H/U that will serve this purpose. Also wondering if JVC makes any H/U's worth buying that do this?

I see that quite a few people have these. These amps any good? SQ? Efficiency? And do they do their rated power?

I know that the 3500d is on presale, how does the presale work? Were can I order them and how long does it take before I would receive them.

Okay, let me start off by saying I've installed a countless number of CD players in cars. This is the first one I've had trouble with, and also my first Pioneer. I bought an 880 off of ebay a while back for about $200. I initially installed it in Octoberish. It would work fine when I normally had the car running, but when I switched my lights on it would cut in and out every second. I attributed this to a couple of wires being switched. (The first wiring diagram I had was wrong.) Well I eventually got this fixed by switching the two wrong wires. My CD player would now work with lights on and off. However, when I would switch from on to off my CD player would cut o…

Guys where can i find a good alternators for my 2001 dodge neon, something good at a reasonable price...some numbers would be nice too

opinions?

this might sound noobish but i wasnt sure. im getting an aq2200d, but im not going to be running it at 1 ohm, im going to be running it at 2 ohms for the time being. the question is, do i need to up the battery and treat like im running it at 1 ohm (2200 W)? i think i should be fine off my stock battery since im only pusing ~1300 watts correct?

hi guys finally bought one i have a 130 amp alt and a 2400 kinetik and 800 kinetik and all 1/0 cable is that enough to power this i was thinking of getting another hc800 will i be ok i know i could use more batts but i should be ok right? thanks in advance Billy

http://i39.tinypic.com/1z1v76f.jpg Woudld this be the best way to wiring (4) 4ohm subwoofers down to 1 ohm. Or are their any other possibilities.

I currently have a rockford 1500.1 amplifier, 2 12" fi q's a power acoustik 5 farad capacitor and a stinger sp 680 car audio battery. I have been having problems with the amplifier and am not sure what it is thats wrong or what I can try next or if the amp is possibly deffective. the amp is currently turned up a little less than half way and when I put the base all the way up on the head unit and turn the volume up about 3/4 the way up the amp will shut off. The red light does not come on to put the amp into protection or anything just the amp turns off than back on a few seconds later. I have upgraded the big 3 with 4 gauge wire and ran 0 gauge wire from the battery back…

How do I bootleg my 700bt Pioneer deck so that I can watch videos while I am driving. I have seen people do it, I can do it but once I hit 7 mph it turns to protection mode.....help please

where can i find battery terminals with two 0 guage inputs. the only ones i can find have one 0 guage and one 4 guage.

So a friend of mine has a Q45 (the car) and he has the BOSE speaker system installed in it. He's no car enthusiast, nor am i, we just like our stuff working (I am the sub junkie). Recently he said his front left tweeter stopped working completely. He said if he breaks hard it will work for that moment, and perfectly. I'm leaning that it's not blown and it might be a loose wire? Should i just pull the dash open, rewire that speaker? Thanks

I checked my battery, nothing is touching + and - I checked the amp, the power wire and ground fit nice and snug with no loose strands The amp worked last night......all i did was unhook wires, move it to the trunk and hook the wires back up....I'm at a loss The only thing i can think of is its somehow shorted in the amp, but i didn't shake, tip, etc. since last night...i don't think the power wire is cut since i turned the car on and the fuse in the engine bay is fine. I have an AQ1200D and two SDC2.5 subs by the way.

So i recently got a pair of DC Audio Subs..1000rms/2000 max.... well i have been told that it since they are a pair of 2ohm subs that a mono amp will not push it to the amps max.. i am looking to spend at the most 350.. I would really apppriciate the help:)

I have been using a stock HU with a LO convertor.... and I want to get the most out of my system. Problem is, I have a tahoe and I don't want to kill the functionality of onstar / anything else. What I want is a touch screen radio that is reliable and has good eq adjustments. I also need to plug my Ipod into it..... nav isn't really needed but it would be nice too. I was wondering if any of you would have some suggestions? Thanks

hello all i know i don't post much but i need some help, i have a 94 supra and i think it's time to upgrade the audio system. first let me say space is limited, i want to use a 5 channel amp because that's all it seem like i have room for. i will be using polk component speakers zx350.4 and they are 6 1/2, i also need some input on some bass speakers i don't want anything bigger than 10" i have a box to go in the stock location. any info will be appreciated. thanks.....

I got a brand new aq1200d and after i wired everything up the amp has power and has plenty of it, getting almost 14 volts while the car is running, but there is no signal getting sent out from the amp. Ive tested it with a known good rca cable and even used an ipod to eliminate the head unit but still no sound. I don't know what to check now. The amp is not going into protected mode. Going to call audioque 2night after class and see if they have any input. any advise before i go crazy lol

looking to put a clean sounding (sq) system in a nissan senta. I do not want to upgrade the alternator. Any on a amplifier suggestions in the $500 range. if it costs a little more that is fine also.

Its time for me to install all my gear, ive installed few HU's here and there but never a full system consisting of multiple amps, subs, rear battery, and components. I was told to run a line of 1/0 from the front to the rear + batt terminal, and ground to the chassis of my car. Fuse few inches from front + batt. terminal. For the rear battery, do I fuse inches before the rear battery? How big of ANL fuses should I use, I will have 170 amp fuses in total from my amps, so maybe 200 ANL fuses will be good? Then from the rear battery, ill be running some 1/0 gauge to a dsitro block and will give me 2, 4 gauge outputs that I will connect to my amps, (AQ 1200d, and Kenwood KA…

Is the JL Audio A4300 amp a good match with 4 Infinity Reference 6822cf speakers? I got the speakers for free and just wanted a good cheap amp to power them to their full potential. Also is there something else you would recommend for these speakers instead? Specs Speakers: RMS - 2-60 watts Peak - 180 watts Impedance - 2Ohms Amp: RMS Power @ 4 Ohm: 70 watts x 4 at 14.4 volts *RMS Power @ 2 Ohm: 110 watts x 4 at 14.4 volts <<This setup? RMS Power @ 4 Ohm: 45 watts x 4 at 12.5 volts RMS Power @ 2 Ohm: 75 watts x 4 at 12.5 volts RMS Power @ 4 Ohm: 220 watts x 2 at 14.4 volts RMS Power @ 4 Ohm: 150 watts x 2 at 12.5 volts