Amplifiers / Head Units / Processors / Electrical

i was looking at the knukonceptz krystal rcas ... they are looking pretty nice for the price ... anyone have any experience with them? ... they look similar to the high end jl interconnects or the mid grade monsters

okay i have 2 mtx ta81001 amps straped....@ 4ohms it does 2000 rms .... because i have a D2 btl that is the only safe way i can run it..... my friend has an orion 2500d the silver one with the endcaps..... should i sell my amps and get his...i have meterd with my current setup and did 140.4 on the tl there is a comp this weekend and they are gonna use an ac mic... now i was planing on dropping the sub to one ohm for the burp....but i know that its not safe as those amps arent half ohm stable....should i get his amp? plus an advantage to having his is less headache dealing with one amp...... here are the specs im looking @ 2500d 2500rms @1ohm 81001 1500rms@1ohm x2 = not s…

US Amps XT-1600.2 I was looking at that amp on here, and thinking about maybe getting it. It looks good to push my 7515. Or should I consider something else? I'm just begining to start shopping.

I'm thinking of getting this to push rl-i 8"s in the wifes car. I had a directed 1500D, but it's on it's way out. It states that it'll do 1500@1ohm, but how true to rated power does this amp do? Thx for any & all help. P.S. Here is a link to info on this amp. http://www.savinglots.com/lotprod.asp?item=XT4000D

Hi guys. As the topic states. below is what I have considdered so far pls give advice .. feel free to add and give a reason. preffer not to get processor just yet. system will be used for 2-way active. eclipse 7200 MK II (this is what i wanted to get but now people say its not all that) Price around s$1050 alpine 9887 around $800 singapore dollar clarion D2 (price not sure and the ugliest of the bunch) Pioneer DEX-P90RS (looks promising but way over budget and no-one here have it, so that i can audit it. s$1500)

Setting about to find the best Amplifier for your sound system could be a whole lot simpler if you just dedicate sometime before hand to learn what is best for you and will perform best with your type of car, truck or SUV's audio system. It's worthwhile to learn about the functions of an Amplifier for you to make an informed purchase; the major function of an Amplifier is that is receives small sound signal from your auto sound system and increases it to produce louder sound. This means that the more powerful your Amplifier, the more exceptional quality sound it produces. A lesser-powered Amplifier will therefore have a weak, thin sound that is quite unappealing in any au…

yea i have this old PG XS4600 i bought a few months ago, and this guy said it workd. apparently it didnt. powered on and everything, but it blew the set of CDT's it was connected to. it sounded like the speaker was bein hooked up to a wall socket, like pure power. Whats wrong with it? heres a pic of the guts. looks fine:

what would be a good amp kit for a 12" btl with the saz-2000d

Ok guys I thought my sae-1200 v.2 was screwed when I wasn't getting any output from it at all and it was randomly going into protect mode. I decided to check my connections and behold they were really loose, including the speaker wire on the verge of falling out of the terminal on the back of my box. I redid both of my speaker terminals inside the box and now my amp is not going into protect mode whatsoever. But when I turn the volume up to a decent level it just cuts out but it isn't going into protect mode. When i turn the volume down it comes back on. So I'm almost positive it's low voltage. I'm going to be completing the big three and putting an optima yellow top up f…

I'm looking for an amp that will push (2) DD3512E's to either close to the max, or max them out. Any suggestions that will give me that amount of power at 1ohm? I'm running two D4's jumped down to a 1 ohm load. System is stock right now, I plan on getting the big 3 done...and another battery. I cant upgrade the alt by much, only up to 120 amps

Just ordered my crescendo 5500... Great customer service .... Real customer friendly people.... Now i can sit and wait for my Early Birthday gift to myself.....

Do they make a complete dead heads? Like without any processing, internal amp. Basically a volume knob and a line out? Prices?

today iinstalled 2 15" idq's in individual sealed compartment..maybe 1.75ft^3 a piece, being pushed off a memphis pr series amp(the big 2 channel one) and here's the deal...after a few bass hits..it quits playin....one sub sucks in and the other pushes out. u turn the h/u for a few seconds, it'll start playing again and then uit again. here is what i checked.. 1) the amp never goes into protect mode and doesn't shut off when the subs quit playin...also the amp was benched about a month ago because of the same problem..different car...tested ok 2) all connections are tight..had to fix a few on the box terminals 3) changed from mono bridged to stereo to play with the impede…

I have an arc audio 1200.1 amp I have not used it yet but wanted to see if anyone on this thread had any opinions on it. I also have bc2000D amplifier. I realize the wattage difference. I have been told that the arc will be very effecient. Should I expect the same out of the crescendo? Just exploring options. My build if for my daily driver.

thinking about a bit more juice for my rl-p currently useinga p.g.xennon 600wrms-very nice. got a dual 4 ohm rl-p so amp has to give plenty (1000 wrms at least) @ 2 ohms,and be excellent sq. anyone know what amp i need? link?

i got my hands on one.. it should be here in the morning.. i got it from a friend.. his dad has it in one of his old broken down trucks, (rednecks with lots of money) anyhow, his dads, brother did SPL back in the 90's and this is one of the amps he used... he knows im into spl so he asked what i would give for it... i know its a surf borad cheater amp fom years past, i knew them to be a pinkish purple but he says this one is silver, and about 4 feet long, he said the number on it is HC100 .... anyway. its in working cond, what kinda resale am i looking at on this?

would anybody be able to tell me were i could get a voltmeter for my dash im looking for just a basic one any advice would be helpful

Which is a legit website to buy a BNIB Alpine 9887, not refurbished. OCS: Alpine CDA-9887 In-Dash Receivers with Bluetooth - Video/Multimedia at Onlinecarstereo.com -says brand new sealed in factory box -seems as though reviews of this site goes both ways. PowersellerNYC: PowersellerNYC - Alpine CDA-9887 CDA-9887 CD/MP3/WMA/AAC Receiver -says refurbished and for the same money OCS is advertising its making me think OCS's may be refurbished as well. -not sure on the sites credibility DCCA: Alpine CDA-9887 CD/MP3/WMA/AAC Receiver - iPhone Compatible -says BNIB factory sealed -reviews on this site go both ways as well ASW: Alpine CDA-9887 CD, MP3, WMA PLAYER -doesn't say…

I have 2-12w6v2d4's and i just bought a saz-1500d. My question is will this amp blow my subs and also is there anyone on this board who has ran this setup? I'm thinking if i keep the bass on the amp down it will be ok am i wrong? Thanks in advanced for the help.

I'm thinking about doing a double din conversion on my 02 Silverado and was looking at the new soundstream/ power acoustik ingenix series double din. Do yall think that it would be a decent head unit without spending too much? Or would it be worth doing the conversion for?

I have 2 of the same type of batts, then another one of a diff brand. The 2 have like 80 something a/h and hold like 1000 amps or something, and then the one has 100 or so a/h and like 1200 amps of storage. Stock battery from what I know up front, 200 amp alt, and I will be putting in a Audioque 2200d (unless I find a more powerful one for a better price). I have 2/0 welding cable, a good amount. I was planning on doing the big 3 with this, then wire from the positive battery under the hood to the batteries in the back. I can't decide which setup to use, the 2 batts, single batt, or like all 3? Would it be better to run negative and a postive to the back? All I need for…

My birthday is coming up and id really like to increase my power to my sub as much as possible with $200. I currently have a power bass 400 rms at 4 ohms. My sub is single 4 ohm. Rated for 500rms. But id like to give it quite a bit more. Whats the biggest amp i can get for 200? I have a fi x12. In a ported box tuned to 33 ish maybe a tad higher. But i dnt play it at high volumes for more than maybe 10-15 mins. So im not too worried about anything blowing. I was thinking about geting a recone and try to recone it to dual 2 ohm.. And run my amp at 1 ohm... But thats kinda reckless because its only stable at 4 ohms. But if i set everything at 1 ohm and tune the amp with a dm…

I'm getting 2 12" kicker L7s wired to 1 ohm. I have an amp just sitting around and its a planet audio ac2500.1m. I'm thinking I will run the subs at 4 ohm. Any suggestions? I really don't have money to get a 1 ohm amp at this time. thanks guys

http://www.gruberpower.com/gruberpower/adv...8-GPS12-270.asp i will have at least 3 or 4 of them. or should i go with the HC kinetiks? these will be powering either two sundown SAZ1500d or one SAZ300d. 4 18" FI SSD stock