Amplifiers / Head Units / Processors / Electrical

this is basiclly the finally ungrade to my car for quite a long time. what i have installed already in my 00 olds intrigue (stock alt. no big three **unless later needed**) sony gt cdx310 reciever tsunami 1.2 far cap kenwood kac-x10d aa arsenal 12 d4 polk db series 5.25 mounted in the door's stock location db1000 tweeters db 6x9 rear deck ran all 4 gauge kicker wiring looking for a 4channel amp for under $150 to power tweets and 5.25's i really enjoy my kenwood excelon that i use for my aa. ive found a kac-x542 for 135 shipped on ebay. here is a link to crutchfield < link to crutchfields > also found kenwood's newer line excelon for about 170 shipped. the kac-x…

http://www.crutchfield.com/App/Product/Ite...A465&tp=115 Link to the amp. I need an 4 channel amp that is 2 ohm stable and has variable cross overs. My fronts are Infinity 682.7s with stock 8" midbass in the doors. No rear speakers. I'm actually happy with the sound using my HU to power the 6x8s, but it is starting to die since the speakers are 2 ohm and the HU is not 2 ohm stable. I also want to be able to control the cross over points of my midbass speakers better.

I wanted to pick up a eq soon to really fine tune my system i was thinking of like a 5 or 7 band with sub level, anyone know of any good 1/2 din eq's?

I'm trying to determine what my next step should be. My 2002 4Runner has a Sundown Audio SAX-100.4 on the front components, and had a Sundown Audio SAZ-1500D on the subwoofer. However, it appears my wiring is insufficient as I burnt the 1500D a while back (running sub-less for months now). I'm not sure what steps I should take to avoid this in the future. I have the stock battery and alternator, with 4-gauge to blocks and 8-gauge to each amp. In hindsight, this is terribly inadequate, but we only learn from our mistakes. What steps should I take next? Should I add a dedicated run from the main battery to the 1500D? If so, which gauge? Should I do the "BIG-3" or install a…

the minimum i would want voltage to drop is 14.5! i am planning on getting a 250a alternator and 3 of these Batteries my amp is going to be a Crunch GP3000D-Pro running 4 18"Fi SSD stock! any info would be appreciated thanks in advance

I've got a '03 Chevy Trailblazer LTZ, with a stock battery and 150amp alt. If I run a SAZ 1500d with my DC 15, will my stock electrical system be able to handle this? Or should I install a second battery in the back? Big 3? Any suggestions would help. Thanks.

I been looking around for head units and I haven't found the "perfect" one. I currently have an Alpine 9883 and I wouldn't really buy it again. I use my Ipod and I dont like the way to select music on the head unit. I was on the Sony Xplod site and this head unit looked pretty cool. MEX-BT5100. Has anyone had experience or worked with Sony head units? Or if anyone has a better choice let me know.

Walking through Target the other day I saw an interesting Pioneer box out of the corner of my eye. Not expecting to see nice head decks or anything really pioneer at target, I checked it out and found they were selling CD-IB100II iPod adapters for $14 a piece! I can't find these for less than $50 online. They had at least one left, so if anyone here needs one cheap, $14 + shipping and I can probably send you one. I love finding deals like this!

I was looking at ssa and found this amp the amp I was wondering what ya think about it

my pioneer flip out had all of the preouts go out. I am looking for a nice headunit in the 300 dollar range. video is not necessary, but would be nice. I have a couple choices. I really like the eclipse cd-5000. I will not buy another pioneer. my other choice is a jvc kd-avx11 with a clarion eq to bump the preouts to 7volts. what would you guys do? I need higher voltage preouts and something that will sound good and last. I am going more for spl.

How do ohms have an impact on the electrical system.? I know that if the woofer is wired to a lower ohm rating then there is less resistance. Does this mean that a 600 watt amp at 2 ohms is the same electrical strain as 1200 watt at 1 ohm? And. I have heard that a higher ohm rating results in "tighter" bass. I believe it is a myth but I want to ask the input of the users on this forum.

I surveyed all the quality amps thats in my $, to run my focal 165v1 and havent decide for the subs maybe a single RF 12" P1 or 12" Kicker comp both in 1.25cu.in sealed box atomic 50.4 2001 lightning bolt 300.4 zenon 80.4 formula x 1600 4ch amp forgot the specs or should i get focal solution 25 A1 will it give better sound quality?? currentlu using a very old amp infedility 800.4 pure class A, if i change to any of these amplifiers will it dramatically improve my SQ? Make it louder and cleaner

I've been looking for a big 5000 or 6000 watt amp kit. Do they even sell any kits like that, or do I need to buy all the wires and cables ect. separate? I'm running an Atomic AT-5000.1D I'm looking to buy one of the best amp kits to run with this amp. Basically because, I paid all this money for this amp so I don't want to get a cheap amp kit. But you know how that is. Thanks everyone!

Ok, so i fire up my car to leave my friends and hear a pop then smell burning.... Smoke is billowing from my remote wire and it seems it had gotten loose from my amplifier and touched ground while still inside the remote section of the amp. This is visually the only thing i think could have happened. Amp light turns on amp doesnt work, opened up the case and notice a few burnt fets and some bars... Ile get pics later but if theirs char marks on the board do you think this is still fixable and how costly would the repair be? I have horrible luck and just want to push this whole car off a cliff at some point... BAH!!

i want to run my orion 2500d to .5ohms. i want to know what it will take to run that low i have two red tops and 160alt. two 15 inch Arsenals. shouldn that work

im picking up 2 12 loaded btl's soon... i just got my atomic 5000.1d now im trying to work every thing out on power.....i need a little help. heres a little story for you lol first i was going to go with 2 13w7 and 2 1000/1v2 amps i bought the amps brand new.so then it was time for me to do the big 3. i bought a 180 amp alt put it in and did every thing i needed to do...when it was time for me to buy the subs...well i found some one on ebay selling 2 brand new 13w7's i was like.... ''damn very thing is going good for me'' i bought them for $816 and i got ripped off (it was a fake listing) it took some time but i got $750 back and i did not get any help throw paypal. i …

Is 1000 watts on 1 ohm too much for 2 yellowtops, big 3, and an 80 amp alternator?

here soon i will be getting another amp most likely a sundown, and the amp i am running now i will be running 2 gauge wire and im wondering when i get my other amp if i should use a distribution block or run more wire??

Ok, I'm going to make this short.... Who in their right mind would design an amplifier capable of producing upwards of 1000 watts of output, but supplies the cheesiest little friggin power connectors to run it?! I just spent hours trying to figure out how to connect 4 gauge wire to a set of crappy little power connectors that could only accept 10 gauge at most. I finally ended up using a piece of airplane cable and cable sleeve to "step the wire down" to an appropriate diameter. I was to two different "car audio shops" here in the city and explained my dilemma. All I got was a sorry, can't help you. What do you guys do when faced with this situation?

Anyone know anything about them. My buddy wants the CR5000.1.

I was reading some of the threads here and I noticed a lot of you really don't like Hifonics. I just bought the BXI1206D and ZXI6406. I know exactly why most of you hate them, looking at your set ups (very expensive) i can totally understand why. Noticed a lot of Sundown Audio fans here. All i have to say is that they are beautiful amps, I would love to have one but with 2 kids and the budget i'm on i just couldn't afford it yet. I do hope my Hifonics can serve me well for the time being until i can afford better stuff. Just wondering, what do you all think of Elemental Designs amps (nine.1, nine.4 and nine.5)?

CADENCE ZRS-8000D what do yall know about this particular amp past or present history. I know their old stuff was the sh@t but how are they so far as quality now? I see them for about 600 shipped and its strappable @ 2ohm plus its not a bad looking amp. Wanted to run 2 fully loaded btl12s in my Thunderbird tuned to 32hz. Wanna totally seal off the enclosure to the cabin as well. Trying to make a nice GP.

i need help picking out a good fuse block because the one I have is crap. so any suggestions would be nice thanks

im trying to figure out which amp will be better with the proper electrical. 1. MA Audio 5082HX http://ampguts.realmofexcursion.com/MA_5082HX/ 2. Memphis 4kW thanks for your help

Hi guys, I have an older Orion 8004 (circa 2003) that has a rather odd wiring setup. I'm not sure, but I think the remote turn-on power is the connector on the far left - with the one bank of speaker connectors. Notice the power connectors on the other side. Can someone please confirm this for me? Thanks, Mark