Amplifiers / Head Units / Processors / Electrical

This is the Orion HCCA-D5000 Output Power at 13.8V: 1 x 1000W @ 4 ohms 1 x 1600W @ 2 ohms 1 x 2500W @ 1 ohm Dimension: 22.8

So what are the benefits of a line driver? I have a Clarion VRX755VD w/ 2volt preouts. With the gains set at 3/4 of the way up I still have to turn the deck's subwoofer gain setting to +3. If I don't turn the deck gain to +3 then the subs won't "max out", even when I reach full volume on the HU. Would a line driver solve this problem? I just don't feel safe turning the gain on the amp all the way up.

When an active x-over is set, amps that power mids and highs, do the x-overs on these amps need to be set to Full Pass? Also, amps that power subwoofers, do these amps' LPF need to be set as high as possible? and if their is a subsonic filter on the active x-over, does the subsonic filter on the amp need to be set as low as possible?

Memphis 16-XO3 ( i can get it refurbed off ebay for 90 bucks) http://www.woofersetc.com/index.cfm?fuseac...Product_ID=3434 JBL GTX47 http://imezak.com/gtx47.html or JBL MX1000 http://imezak.com/mx1000.html the Memphis seems to have the best slopes (18db high, 24db low) but the GTX47 looks liek it would have more features. im leaning toward the memphis right now.

Ok so heres the deal. I have one of these and i just ordered a 15 Fi BTL dual 1, everythin except the cooling. My question is if i were to get a second sub again dual 1 and wire them both to 2 ohm that would be one ohm at the amp right? Also if i were to strap another amp it would still equal one ohm at both amps right?

ok ive been looking throught the "big 3" posts and i understand everything except for the block to chassi ground i cant seem to find the stock one on my truck. if i cant get to it what would be the easiest way to do this also would it hurt anything if i ran 2 1/0 from alt + to batt+?

Does anyone have any experience with the 2003 line up of Rockford Fosgate punch amps? I'm considering picking up a Punch 150 "25 to life" amp to go along with my Punch 600.4. I'm wondering if it would be better to go with this amp or to stick with the older style 500.2 that I can get a bit cheaper.

I couldn't decide for the longest time and now i've finally decided. And i'm going with AVIC-D3. I bought it today now its just a matter of time until i get it in. Hopefully tomorrow. I was bored so figured i'd post. Feel free to tell me what u think about it.

ta92001. anyone messed with this amp? rated 3k @ 1 ohm, birthsheets supposedly read around 3.8k @ 14.4v true? good amps? looking to get one to be run @ 1 ohm on an 18" mt. also looking at getting the ta91002 (750w x 2 @ 1 ohm) and the ta7402 (i think thats it) discuss.

ok i think i got it. check out the diagram, and tell me if its right. i heard that alot of amps will output a low freq or pop for a second when you turn the amp on, and to use a cap on each channel to not allow that freq. to get to my tweeters. the nominal load of each channel after i wire it up will be 1.5 ohm. so according to WinSD or whatever it is, it say that a 68uF 100V cap (with the 1.5 ohm load) will not let any freq under 1000ish Hz pass through that cap. is that right? i also have the Coustic XM6 (just ordered) which is 18dB per octave, and then the HPF on my amp is 12dB per octave, does that make my overall slope for the tweets 30dB? plus does the cap still add…

ok last thread i promise- i wanna keep this clean and no bs posts, just information please. reason is that i'm positive this is the last thread is becuase i got my tweeters in, and they were hard to find, i got the 8 of the last 10 pairs they had in stock, and i only paid dealer cost (48 a pair SHIPPED) vs like 80 a pair where most others sell them for. anyways, they're still bullets, i know you guys wont like them, but they are comparable to Eminence sound wise, they're a tad bit louder too, 109dB efficient.... also, they look better too. again, not to most of you guys, but i didnt want 16 big square eminence tweeters, so i got these, they look like the Beyma/o2 bullets,…

ok well in the mini cooper, the back windows are tinted with 5%, plus will be covered completely anyways, so NO sun at ALL will be coming in the back hatch area where the amps are. they are those MTX TA amps, they have that "xtant" cooling thing or whatever, where it sucks air in the front, and it blows out the sides or something like that. well, since its gonna be walled off, no a/c will be in the rear...i basically wanna throw a few fans in the back that come on with the headunit just to have airflow back there....and i dont mean a couple little PC fans...any ideas? something that wont draw hardly any amperage either.

this is what i want to do. if someone could draw up a nice detailed wiring diagram to help me better understand it, id really appreciate it ok first off, please dont hate, you guys know how i do with the mids/highs, im just looking for someone to help, if you dont want to help me, please dont post and get my thread locked or start arguments. ok, so, in the mini cooper, ill have a total of 3 amps. they're on order so theyll be here soon i have the 18" mt, 16 6.5s in the front cabin, and 16 tweets in the front cabin. in the back (behind the wall in the cargo area) i will have 2 sets of components (or 4 coax, whatever i decide on) for shows or whatever. the front 16 mids w…

im about to start a 4 stock with 1ohm DVC 18" fi ssd blowthrough on my 95 ram singlecab and i am looking for some pretty good prices on either a powerbass XA-3000d or the massive audio P3000.1

I would like to give a big THANKS to johnecon2001, vladd and a few others for talking me into experiencing the wonderful world of Time Alignment. I recently purchased an Alpine 9887 and can not believe the difference in the imagining that TA makes. How did I ever get along without? Thanks again guys this is by far the coolest/greatest thing since Sliced Bread.

Hey ok i have a question about multliple runs of wire from a battery in front to batter in rear to amp. Would i just go from + on batery in front to + on battery in back, and - from battery in front to - in battery in back the + from battery in back to + in amp, and - on battery in back to - on amp. Then ground the neg at front. Heres a pic of what i mean (the boxs on the + wire are fuses) Also say i wanted to do two runs of 1/0 would i do 2 + and 2 negatives between the batterys and then just do 1 run of 1/0 to the amp? Thanks for the help! hope i made a little bit of sense, please let me know whatever i did wrong im open to suggestions!

ok here it is I think that I'll be going with either the opti 6000 or the VFL 500.1 any input on which one would be greatly helpfull. Also if there are any others in the same price (1500-2000) feel free to post them. Thanks

http://cgi.ebay.com/Clarion-Pro-Audio-DRZ9...1QQcmdZViewItem

Okay guys, My wife has been beggin me to get her new truck (2007) silverado Crew to sound similar to my old S-10. In the S-10 I had a downfiring box with Solobaric S10D's 4ohm running mono on a US 1000X Some might say it was a little overkill but I had it turned down and was probaly one of the cleanest systems that I had herd (Yes I know just my preference) I also had MB Quart Q's for mids and Highs running off a PPI PCX280 which I still have the Quarts and the PPI. Okay you might be wondering where I am going with this. I am looking for a little help for powering these subs, and keeping the SQ good. The sq was amazing with my US amp and it pounded at the same tim…

i read what i could find on what makes an amp what class but nothing on how each performs. why i'm wondering is i'm considering using an ab amp bridged for my sub. i'm trying for what i would imagine is described as LSQ.

Looking for an amp that is at least 750watts rms for a kicker L7. What brand is better Hifonics or Soundstream? The amps that i am looking at from the 2 company's SOUNDSTREAM PCA2.760 2 CHANNEL 760 WATT AMPLIFIER NEW AND HIFONICS TXi7506 750W MONO AMPLIFIER AMP TITAN TXi 7506

Well, I was planning on running two 15 or 18 Fi audio Q/Bl/Btl. On on a orion 2500D. but found a RF T30001 BD for like $750, seems like a good upgrade for not much more...right? opinions..?

I am looking at an amp for my pioneer premiere ts-c720prs speakers and came across a refurbished usx2080 for $50 plus shipping... It does 80rms at 4 ohms and is made by zed audio... Just wondering if anyone knows anything about these? Here is a link to them on the ebay page... http://cgi.ebay.com/US-Acoustics-USX...d=p16 38.m118 I was also wondering about a us acoustics usa2100.... Can't seem to find much specs on this amp... I think i can get it pretty cheap though.... I have found some things that say 100x2 at 4 ohms... I am also wondering how these compare to a zx250.2 or a kz250.2 cause i can get refurbed of both of those for 65-80 plus shipping... Also, what is the d…

Hey I was wondering what good cheaper amps (around 300) would run two SSD 10s with copper coils. I have two in the mail right. Do I need to give each 800 watts to be decently loud? Also wondering if will likely need to do any changes to my electrical system. I've tried to see what amperage my alternator puts out but cant find info, so if you know what an '06 Rav4 without tow package does that would help a lot. Otherwise I think I'm gonna call the dealer. Thanks for any help!

Ok here we i just bought the mach5 6.5 i bought a saz 3000 and a 18btl with an enclosure design by hexibase. Now my question is what would be a good amp to push the 6.5 i know the saz 100.4 but my budget is getting low so any other sugestion thanks.